PIR sensor behind glass?

cowboysdude

@Nususu I would go online and lookup ‘wiring pir sensor raspberry pi’ there are TONS of things out there. Your issue could be one of any or a combination of things… I did that using a PIR sensor so I have no idea how it would act with microwave sensors… good I’m hoping because I want to get some… BUT let me know if you need anymore help, not that I helped you now but I will do what I can!

cowboysdude

@rvdgeer and @Nususu

Try here!

https://www.pubnub.com/blog/2015-06-16-building-a-raspberry-pi-motion-sensor-with-realtime-alerts/

Nususu

@cowboysdude thanks, I’ll check that out and let you know how it goes!

Nususu

@cowboysdude I got it working using this code:

https://github.com/paviro/MMM-PIR-Sensor

With this code, I’ve got a problem where the screen only stays on for about 1 second after motion detection. Now I need to modify the code somehow to allow me to tell the mirror to stay on for a set amount of time after detecting motion, i.e. only go dark once no motion has been detected for x seconds. Problem is I don’t know where to start with that. Will let you know if I figure anything out. Any ideas?

cowboysdude

@Nususu try adding the powerSaving to your config…

{
        module: 'MMM-PIR-Sensor',
        config: {
            powerSaving: false
        }
    }

See what that does :) PLUS there’s also an adjustment on your PIR sensor itself… which one and I don’t know … do a google search for adjustments :)

Aly

@Nususu - same here

Perhaps, with a resistor?

Nususu

@Aly I found documentation for the sensor that a resistor would indeed solve the issue here. I can set the delay up to 200 seconds with a 250k resistor, so I ordered one and will report back how it went.

Aly

@Nususu - great !!

Can you post the doc. ?

Nususu

@Aly I misspoke, shouldn’t have called it documentation. Rather, it was this picture: alt text

Which appears to be a translation from the Chinese original picture.

Aly

@Nususu

so if we remove the R6 resistor the delay would be 30s ?