PIR sensor behind glass?

Nususu

@cowboysdude I got it working using this code:

https://github.com/paviro/MMM-PIR-Sensor

With this code, I’ve got a problem where the screen only stays on for about 1 second after motion detection. Now I need to modify the code somehow to allow me to tell the mirror to stay on for a set amount of time after detecting motion, i.e. only go dark once no motion has been detected for x seconds. Problem is I don’t know where to start with that. Will let you know if I figure anything out. Any ideas?

cowboysdude

@Nususu try adding the powerSaving to your config…

{
        module: 'MMM-PIR-Sensor',
        config: {
            powerSaving: false
        }
    }

See what that does :) PLUS there’s also an adjustment on your PIR sensor itself… which one and I don’t know … do a google search for adjustments :)

Aly

@Nususu - same here

Perhaps, with a resistor?

Nususu

@Aly I found documentation for the sensor that a resistor would indeed solve the issue here. I can set the delay up to 200 seconds with a 250k resistor, so I ordered one and will report back how it went.

Aly

@Nususu - great !!

Can you post the doc. ?

Nususu

@Aly I misspoke, shouldn’t have called it documentation. Rather, it was this picture: alt text

Which appears to be a translation from the Chinese original picture.

Aly

@Nususu

so if we remove the R6 resistor the delay would be 30s ?

Nususu

@Aly yes, it would appear so. I just bought a soldering iron and resistors which arrive tomorrow so I’ll perform a couple tests: 1. Remove r6 and verify that it’s 30s. 2. Add 250k resistor and test duration.

Aly

@Nususu

Ok - thanks for your help! :)

I can/will test it on coming monday.

Nususu

@Aly I tested this today - I put a 250k resistor on R6 and it increased the timer to approximately 25 seconds. I forgot to test without a resistor. Let me know if you end up testing that.