Assistant Error

shep99

Thank you @Sean appreciated! I tried that ( also tried the steps outlined here ) : https://github.com/eouia/MMM-Assistant/wiki/Urgent-Issue-on-installation

And after install Ihad two folders in /home/pi/MagicMirror/modules/MMM-Assistant/node_modules/grpc/src/node/extension_binary/

electron-v1.4-linux-arm-{libc}
and
node-v48-linux-arm-glibc

I renamed the folder electron-v1.4-linux-arm-{libc} to electron-v1.7-linux-arm-glibc but when I run

cd /modules/MMM-Assistant
node google-auth.js

I get the following error:

pi@smartmirror1:~/MagicMirror/modules/MMM-Assistant $ node google-auth.js
module.js:597
  return process.dlopen(module, path._makeLong(filename));
                 ^

Error: Module version mismatch. Expected 48, got 50.
    at Error (native)
    at Object.Module._extensions..node (module.js:597:18)
    at Module.load (module.js:487:32)
    at tryModuleLoad (module.js:446:12)
    at Function.Module._load (module.js:438:3)
    at Module.require (module.js:497:17)
    at require (internal/module.js:20:19)
    at Object. (/home/pi/MagicMirror/modules/MMM-Assistant/node_modules/google-assistant/node_modules/grpc/src/node/src/grpc_extension.js:38:15)
    at Module._compile (module.js:570:32)
    at Object.Module._extensions..js (module.js:579:10)
pi@smartmirror1:~/MagicMirror/modules/MMM-Assistant $

A Former User

@shep99
Hmmm… This error might be derived from the various different versions of node.js of MM, Electron, Google API and other dependencies. MMM-Assistant should have many dependencies, so always the version problem makes me crazy. :(

I’m not sure about your situation, but I think google-auth should be performed before electron-rebuild. because that authentification library uses the different version of modules with other dependencies. I think you’d better try re-install.

shep99

Thanks very much @sean appreciated. I did re install, and ran google-auth then electron-rebuild. After that, I did have to rename the folders from electron-v1.4-linux-arm-{libc} to electron-v1.4-linux-arm-glibc and everything loaded! :) I created my own models smartmirror.pmdl, and snowboy.pmdl ) with snowboy from the RPI that is running MM with the MIC, and running the following two commands I can record and play back WAV files with arecord:

arecord --device=plughw:1,0 --format S16_LE --rate 44100 -c1 test.wav

aplay --device=plughw:0,0 test.wav

When MM startups up, I can here an initial ding, but cannot trigger any key word detection for some reason? I was wondering if my config might be off? Below is my configuration:

{
  module: 'MMM-Assistant',
  position: 'bottom_left',
  config: {
    assistant: {
      auth: {
        keyFilePath: "secret.json", //When you want to change the location of this file, set this.
        savedTokensPath: "resources/tokens.js" //When you want to change the location of this file, set this.
      },
      audio: {
        encodingIn: "LINEAR16", //Ignore this. I think you don't need to change this.
        sampleRateOut: 16000 //Ignore this. I think you don't need to change this.
      }
    },
    snowboy: {
      models: [
        {
          file: "resources/smartmirror.pmdl",
          sensitivity: 0.5,
          hotwords : "MIRROR" //One of models should be "MIRROR"
        },
        {
          file: "resources/snowboy.pmdl",
          sensitivity: 0.5,
          hotwords : "ASSISTANT" //One of models should be "ASSISTANT"
        }
      ]
    },
    record: {
      threshold: 0, //Ignore this. I think you don't need to change this.
      verbose:false, //true for checking recording status.
      recordProgram: 'arecord', //You can use 'rec', 'sox'. But I recommend use 'arecord'.
      silence: 2.0 //Ignore this. I think you don't need to change this.
    },
    stt: {
      auth: [{
        projectId: 'smartmirror-XXXXX-REMOVED', //ProjectId from Google Console
        keyFilename: 'config.stt.auth.json'
      }], //You can use multi accounts for saving money.
      request: {
        encoding: 'LINEAR16', //Ignore this. I think you don't need to change this.
        sampleRateHertz: 16000, //Ignore this. I think you don't need to change this.
        languageCode: 'en-US' //See https://cloud.google.com/speech/docs/languages
      },
    },
    speak: {
      useAlert: true, //If you want to show the text of speech, set this true. But It could be ignored by command of modules directly.
      language: 'en-US', //If you want to set the default language of speech of command result, set this.
    },
    alias: [
      {
        "help :command" : ["teach me :command", "what is :command"]
      }
    ] // You can use aliases for difficult pronunciation or easy using.
  }
},

I am trying to activate using snowboy, smartmirror, assistant, google, etc but it never triggers.

Thanks @sean really appreciated.

shep99

Just wanted to repost here, @sean thanks and got it going. This is an INCREDIBLE module and thank you. My problem was with my MIC after setup. If anyone else is coming across this, this link here helped to get my MIC setup properly:

https://snowboy.kitt.ai/docs

Great module @sean absolutely incredible! Thanks

Chris

Hello,
I am trying to run this module but I am having problems.

Indeed I installed it by following all your previous indications.

The mirror is launched correctly and I have the beep module start.

If I call the module with the keyword, it triggers. I ask my question and I only have a hatched voice in response.
I did not have any problems of this type with open-jarvis which is also based on snowboy.
I of course neutralize open jarvis to avoid conflicts on the sound card.

I think I missed a step on the setup.

The config.stt.auth.json file is placed in the resources folder or in the MMM-Assistant folder?

When I go on the google developer console, I see requests for the google assistant API but no requests for Google Cloud Speech API.

I add my boot log:

pi@raspberrypi:~/MagicMirror $ npm start dev

> magicmirror@2.2.1 start /home/pi/MagicMirror
> sh run-start.sh "dev"

Starting MagicMirror: v2.2.1
Loading config ...
Loading module helpers ...
No helper found for module: alert.
Initializing new module helper ...
Module helper loaded: updatenotification
No helper found for module: calendar_monthly.
Initializing new module helper ...
Module helper loaded: calendar
Initializing new module helper ...
Module helper loaded: MMM-MyCommute
Initializing new module helper ...
Module helper loaded: MMM-Ratp
Initializing new module helper ...
Module helper loaded: MMM-SoccerLiveScore
Initializing new module helper ...
Module helper loaded: MMM-soccer
No helper found for module: MMM-Globe.
Initializing new module helper ...
Module helper loaded: MMM-Remote-Control
No helper found for module: clock.
Initializing new module helper ...
Module helper loaded: mmm-suncalc
Initializing new module helper ...
Module helper loaded: MMM-WunderGround
Initializing new module helper ...
Module helper loaded: MMM-NOAA
No helper found for module: mmm-wu-moonphase.
Initializing new module helper ...
Module helper loaded: MMM-Assistant
Initializing new module helper ...
Module helper loaded: MMM-Tools
Initializing new module helper ...
Module helper loaded: newsfeed
No helper found for module: MMM-Snow.
All module helpers loaded.
Starting server on port 8080 ... 
Server started ...
Connecting socket for: updatenotification
Connecting socket for: calendar
Starting node helper for: calendar
Connecting socket for: MMM-MyCommute
====================== Starting node_helper for module [MMM-MyCommute]
Connecting socket for: MMM-Ratp
MMM-Ratp- NodeHelper started
Connecting socket for: MMM-SoccerLiveScore
MMM-SoccerLiveScore helper started...
Connecting socket for: MMM-soccer
Starting module: MMM-soccer
Connecting socket for: MMM-Remote-Control
Starting node helper for: MMM-Remote-Control
Connecting socket for: mmm-suncalc
Starting node_helper for mmm-suncalc: 
Connecting socket for: MMM-WunderGround
MMM-WunderGround helper started ...
Connecting socket for: MMM-NOAA
Starting module: MMM-NOAA
Connecting socket for: MMM-Assistant
Connecting socket for: MMM-Tools
Connecting socket for: newsfeed
Starting module: newsfeed
Sockets connected & modules started ...
Launching application.
Create new calendar fetcher for url: https://calendar.google.com/calendar/ical/XXX/private-XXX/basic.ics - Interval: 300000
Get league table for url http://api.football-data.org/v1/competitions/450/leagueTable
GET_WUNDERGROUND
[ASSTNT] Snowboy Activated
Create new news fetcher for url: http://www.leparisien.fr/actualites-a-la-une.rss.xml#xtor=RSS-1481423633 - Interval: 300000
[ASSTNT] Assistant Activated
[ASSTNT] GA Transcription:  don't wanna meet you to do now
[ASSTNT] Snowboy Activated

as well as my config file:

		{
			module: "MMM-Assistant",
			position: "top_right",
			config: {
				assistant: {
				auth: {
				keyFilePath: "secret.json", //When you want to change the location of this file, set this.
				savedTokensPath: "resources/tokens.js" //When you want to change the location of this file, set this.
			},
			audio: {
			encodingIn: "LINEAR16", //Ignore this. I think you don't need to change this.
			sampleRateOut: 16000 //Ignore this. I think you don't need to change this.
			}
			},
			snowboy: {
			models: [
			{
			file: "resources/miroir.pmdl",
			sensitivity: 0.5,
			hotwords : "MIRROR" //One of models should be "MIRROR"
			},
			{
			file: "resources/Ok Google.pmdl",
			sensitivity: 0.5,
			hotwords : "ASSISTANT" //One of models should be "ASSISTANT"
			}
			]
			},
			record: {
			threshold: 0, //Ignore this. I think you don't need to change this.
			verbose:false, //true for checking recording status.
			recordProgram: "arecord", //You can use "rec", "sox". But I recommend use "arecord".
			silence: 2.0 //Ignore this. I think you don't need to change this.
			},
			stt: {
			auth: [{
			projectId: "my-project-1505046981535", //ProjectId from Google Console
			keyFilename: "config.stt.auth.json"
			}], //You can use multi accounts for saving money.
			request: {
			encoding: "LINEAR16", //Ignore this. I think you don't need to change this.
			sampleRateHertz: 16000, //Ignore this. I think you don't need to change this.
			languageCode: "fr-FR" //See https://cloud.google.com/speech/docs/languages
			},
			},
			speak: {
			useAlert: true, //If you want to show the text of speech, set this true. But It could be ignored by command of modules directly.
			language: "fr-FR", //If you want to set the default language of speech of command result, set this.
			},
			alias: [
			{
			"help :command" : ["teach me :command", "what is :command"]
			}
			] // You can use aliases for difficult pronunciation or easy using.
			}
		},

Hoping you can help me,

Regards,

shep99

@sean is it possible you can elaborate on these settings in config? I only want to use Google assistant, so have commented out the “MIRROR” hotword, but sometime the MIC picks up on words that are not like my trained model, and sits on the assistant logo waiting for something, and there’s no way to get out of it without restarting the mirror. ie, these settings in particular:

sensitivity:

        {
          file: "resources/google.pmdl",
          sensitivity: 0.7,
          hotwords : "ASSISTANT" //One of models should be "ASSISTANT"
        }

silence and verbose:

    record: {
      threshold: 0, //Ignore this. I think you don't need to change this.
      verbose:false, //true for checking recording status.
      recordProgram: 'arecord', //You can use 'rec', 'sox'. But I recommend use 'arecord'.
      silence: 2.0 //Ignore this. I think you don't need to change this.
    },

Thanks again!

Chris

@shep99 said in Assistant Error:

Just wanted to repost here, @sean thanks and got it going. This is an INCREDIBLE module and thank you. My problem was with my MIC after setup. If anyone else is coming across this, this link here helped to get my MIC setup properly:

https://snowboy.kitt.ai/docs

Great module @sean absolutely incredible! Thanks

Hello,

I still have problems to use despite several unsuccessful attempts.

Could you detail the installation procedure you used?

Thank you in advance,

A Former User

@shep99
Frankly, I have also pmdl problem. When I use umdl, everything is ok. But, pmdl is not worked properly, I don’t know why.

E3V3A

@shep99 Can you please post your ALSA config?

cat ~/.asoundrc
cat /proc/asound/modules
cat /proc/asound/devices

Thanks.

E3V3A

Just want to tell everyone that this module works very well.
I had some initial compile issues and trying to get the correct GA authentication, but after that it worked.

Now, I’m looking at Alexa, since I’d like both Alexa and GA + MM working.
Please see the github issue for solution in case you missed it.