Temp suddenly showing 239 degrees

RedNax

You’re getting degrees Kelvin… Something’s wrong with your units definition…

Have a look at the units entry here: https://github.com/MichMich/MagicMirror/tree/master/modules/default/currentweather

d3r

Something must have happened. I didn’t change the code. I’ll check it when I get home.

digbeta

I have the same issue. Suddenly Current is shown in Kelvin. Setting the units in config.js changes nothing. Alternatively I installed the MMM-WunderGround module and it is showing correctly plus it’s LOADS better. Hourly + extended.

McSorley

Happened to me yesterday. Seemed to resolve itself today.

cyberphox

This post is deleted!

cyberphox

Same thing is happening to me on a new install. Tried even adding units line to config but doesn’t matter what you select it always shows Kelvin. FYI the temperature forecast displays correctly, just not current temp. May have to ditch this and go with a new weather module.

KirAsh4

No matter what I do, I can’t seem to reproduce this odd temperature display. I’ve even started from scratch with a different rpi, completely blank to having MM up and running … no odd temperature.

weezer05

Hi there,

I experienced this the other day, and I checked again - my new pi 3 is still showing an incorrect temperature reading as well. It seems as though the temperature is set to ‘Kelvin’, though I set the temperature to ‘imperial’, within the config.js configuration file.

0_1473565115998_Photo Sep 10, 11 11 08 PM.jpg

---------------------------------------------------------
/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 */

var config = {
        port: 8080,

        language: 'en',
        timeFormat: 12,
        units: 'imperial',

Note from admin: Please use Markdown on code snippets for easier reading!

weezer05

After looking around, I see that github member p0akley seems to have identified an issue 5 days ago that matches this description. Following his instructions I was able to resolve the issue with my Pi 3.

Seems there is a small adjustment needed in the file:
modules/default/currentweather/currentweather.js

Link to explanation / resolution:
https://github.com/MichMich/MagicMirror/commit/25ddf2c65178e2b8afe0709b48d5d30054208c04

KirAsh4

That’s been in the 'develop' branch. Not pushed to 'master' yet. With this being a “biggie” for everyone who’s running the master branch, perhaps @MichMich might consider pushing it to the master branch sooner rather than later.

And my apologies earlier for not having spotted it. I always run the develop branch. #livingontheedge :)