Read the statement by Michael Teeuw here.
Hello-Lucy
-
@TheGeekfather Yes, green :)
-
Hi, you mentioned you were going to fix the install problem after noticing microphone not working with a fresh install.
Any progress?
Thank you for updates
-
@TheGeekfather The mic is an easy fix if you’re using a pi…
Open terminal and type in ‘arecord -l’ it will give you all the info on your mic… more than likely if your using a USB mic it will be most likely 1,0.
In your config in Hello-Lucy in the ‘config’ section of Hello-Lucy you would put:
"microphone: “1,0”,That’s it…pretty simple. Yes I realize simple if you know it LOL.
-
:) Knowledge is Power - That is what I always told my students
This is the mic I have
**** List of CAPTURE Hardware Devices **** card 1: Device [USB PnP Sound Device], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0
-
@TheGeekfather I went to school to be a teacher but never taught… I’m not real good with touchy feeling kinda things I tend to be more direct and that’s not a good thing in Schools LOL
Yes you could add:
{ disabled: false, module: "Hello-Lucy", position: "top_right", config: { keyword: 'HELLO LUCY', microphone: "1,0", timeout: 15, // timeout listening for a command/sentence defaultOnStartup: 'Hello-Lucy', standByMethod: 'DPMS', // 'DPMS' = anything else than RPi or 'PI' sounds: [ ], confirmationSound: "ding.mp3", startHideAll: true, // if true, all modules start as hidden pageOneModules: ["Hello-Lucy", "MMM-Insults"], / pageTwoModules: ["MMM-BMW-DS", "MMM-Events"], // modules to show on page two pageThreeModules: ["MMM-Lunartic"], // modules to show on page three pageFourModules: ["MMM-PC-Stats"], // modules to show on page four pageFiveModules: [], // modules to show on page five pageSixModules: [], // modules to show on page six pageSevenModules: [], // modules to show on page seven pageEightModules: [], // modules to show on page eight pageNineModules: [], // modules to show on page nine pageTenModules: [] // modules to show on page ten } },
That is an example config… the ONLY thing you need to change is the modules listed on the ‘pages’… it should work on a pi with a usb mic… Please note there will be about a 4 to 5 second delay… the pi is small and this is heavy weight it’s lifting.
As soon as @Mykle1 tests this on a pi4 we’ll let everyone know :)
-
As you know, the installer was not at fault. The automatic identification of the microphone was not happening, at least on the Pi. Thanks for stepping in while I was busy troubleshooting and thanks for testing
-
@Mykle1 Who are you and what are you doing here? LOL
-
Uhh, I was hoping you’d tell me. :-)
-
@TheGeekfather If you have any other questions I’m sure @Mykle1 will be happy to help you :) I’m not on that often… the last couple days I’ve been on more then I have been in 3 months LOL
-
Thank you for all your help. Started fresh install - put modules in correct folder
added "microphone: “1,0”,
AND
Hello-Lucy works GREAT :)