Facial Recognition Module - Step by Step Guide

konradwalsh

Hi all,

Due to there being no guide on this and I was looking for one… I have decided to just make one…
I only start figuring it out last night and so I am still setting up. So I will complete this post as I progress.

I am using the following hardware

Raspberry Pi 3
Logitech 1080 HD USB Webcam
MagicMirror is installed and confirmed functioning correctly.

The software I am using to do this is Mobaxterm.
It might be easier to do all of this on the PI directly.

The steps I have taken to get this working:

Set up the tools

Facial Recognition Tools

on the github page click download as zip
extract zip and remove -master from the end of the folder. Note: its the internal folder that you want with the same name.
copy to MagicMirror/modules using your FTP or whatever folder browser you are using.

run this:

sudo apt-get update
sudo apt-get install libopencv-dev python-opencv
sudo npm install python-shell
sudo apt-get install python-pip

change to the tools module folder

cd /MagicMirror/modules/MMM-Facial-Recognition-Tools

run

sudo npm install

pip install -r requirements.txt

Capturing training images

Run

python capture.py

Decide whether you want to capture images from your web cam or convert existing .jpg images.
Enter the name of the person you are about to capture. Images will be stored in a folder named after the captured person in training_data/.
Follow screen instructions.

Training model

Make sure you have captured all your images. Run ``` python train.py ``` The script will automatically scan the directory training_data/ for your images. Wait. You will end up with a training.xml file in the current directory. Copy down the ['name', 'name2','name3'] part because you will later need it for setting up your mirror's face recognition and to test your face recognition model.

Test your steps so far

Make sure your training.xml from running train.py is in this directory - /MagicMirror/modules/MMM-Facial-Recognition-Tools

specify the face recognition algorithm in the environment with

export FACE_ALGORITHM=1

specify your user labels in the environment with

export FACE_USERS=Alice,Bob,Casey,Doug

Run

python facerecognition.py.

Success?

Set up the module for the mirror
on the github page for the MMM-Facial-Recognition page, click download as zip
extract zip and remove -master from the end of the folder. Note: its the internal folder that you want with the same name.
copy to MagicMirror/modules using your FTP or whatever folder browser you are using.

Visit the terminal window and go to your newly create folder - /MagicMirror/Modules/MMM-Facial-Recognition and run

sudo npm install

Open your config.js file and add:

{
	module: 'MMM-Facial-Recognition',
	config: {
		// 1=LBPH | 2=Fisher | 3=Eigen
		recognitionAlgorithm: 1,
		// Threshold for the confidence of a recognized face before it's considered a
		// positive match.  Confidence values below this threshold will be considered
		// a positive match because the lower the confidence value, or distance, the
		// more confident the algorithm is that the face was correctly detected.
		lbphThreshold: 50,
		fisherThreshold: 250,
		eigenThreshold: 3000,
		// force the use of a usb webcam on raspberry pi (on other platforms this is always true automatically)
		useUSBCam: false,
		// Path to your training xml
		trainingFile: 'modules/MMM-Facial-Recognition/training.xml',
		// recognition intervall in seconds (smaller number = faster but CPU intens!)
		interval: 2,
		// Logout delay after last recognition so that a user does not get instantly logged out if he turns away from the mirror for a few seconds
		logoutDelay: 15,
		// Array with usernames (copy and paste from training script)
		users: [],
		//Module set used for strangers and if no user is detected
		defaultClass: "default",
		//Set of modules which should be shown for every user
		everyoneClass: "everyone",
		// Boolean to toggle welcomeMessage
		welcomeMessage: true
	}
},

Change the line to the actual location. It’s probably still under the Tools Module

trainingFile: 'modules/MMM-Facial-Recognition/training.xml',

for me, I changed it to

trainingFile: 'modules/MMM-Facial-Recognition-Tools/training.xml',

Also, change the line called Users to add you list of users that you set up during the Capture.py section above.

users: ['Joe'],

Finally, change the line, if applicable

useUSBCam: True,

FINAL STEP!

For each module in your config.js, set the profile under which it should load. E.g -

{
	module: 'example_module',
	position: 'top_left',
	//Set your classes here seperated by a space.
	//Shown for all users
	classes: 'default everyone',
},
{
	module: 'example_module2',
	position: 'top_left',
	//Set your classes here seperated by a space.
	//Shown for all users
	classes: 'Joe',
},

So now the first example module will load for everyone and the second will only load for Joe.

THIS IS AS FAR AS I AM .. I AM DOCUMENTING AS I GO

@paviro
Module Developer - Please feel free to copy this or use as you see fit. I hope it is helpful to anyone else

konradwalsh

reserved

MichiMauch

Hi @konradwalsh Maybe you have an idea for my problem: https://forum.magicmirror.builders/topic/9055/usb-cam-is-not-recognized-but-works

thanks very much and greeetings
michael

MichiMauch

@michimauch said in Facial Recognition Module - Step by Step Guide:

Hi @konradwalsh Maybe you have an idea for my problem: https://forum.magicmirror.builders/topic/9055/usb-cam-is-not-recognized-but-works

thanks very much and greeetings
michael

Remember to set the name list environment variable FACE_USERS
Using default FACE_ALGORITM: 1
Loading training data...
mmal: mmal_vc_component_create: failed to create component 'vc.ril.camera' (1:ENOMEM)
mmal: mmal_component_create_core: could not create component 'vc.ril.camera' (1)
Exception in thread Thread-1:
Traceback (most recent call last):
  File "/usr/lib/python2.7/threading.py", line 801, in __bootstrap_inner
    self.run()
  File "/home/pi/MagicMirror/modules/MMM-Facial-Recognition-Tools/lib/picam.py", line 27, in run
    with picamera.PiCamera() as camera:
  File "/usr/lib/python2.7/dist-packages/picamera/camera.py", line 431, in __init__
    self._init_camera(camera_num, stereo_mode, stereo_decimate)
  File "/usr/lib/python2.7/dist-packages/picamera/camera.py", line 460, in _init_camera
    "Camera is not enabled. Try running 'sudo raspi-config' "
PiCameraError: Camera is not enabled. Try running 'sudo raspi-config' and ensure that the camera has been enabled.

Training data loaded!
OpenCV Error: Assertion failed (scn == 3 || scn == 4) in cvtColor, file /build/opencv-U1UwfN/opencv-2.4.9.1+dfsg1/modules/imgproc/src/color.cpp, line 3737
Traceback (most recent call last):
  File "facerecognition.py", line 58, in <module>
    image = cv2.cvtColor(frame, cv2.COLOR_RGB2GRAY)
cv2.error: /build/opencv-U1UwfN/opencv-2.4.9.1+dfsg1/modules/imgproc/src/color.cpp:3737: error: (-215) scn == 3 || scn == 4 in function cvtColor

paulGu

@konradwalsh said in Facial Recognition Module - Step by Step Guide:

trainingFile: ‘modules/MMM-Facial-Recognition/training.xml’,

I got a issue when i add the facial module. the Facial-tools work fine, it’s seems like python script issues.

Could anyone help me with this issue ？

Whoops! There was an uncaught exception…
TypeError: PythonShell is not a constructor
at Class.python_start (/home/csc/MagicMirror/modules/MMM-Facial-Recognition/node_helper.js:11:21)
at Class.socketNotificationReceived (/home/csc/MagicMirror/modules/MMM-Facial-Recognition/node_helper.js:40:14)
at Socket. (/home/csc/MagicMirror/modules/node_modules/node_helper/index.js:113:11)
at Socket.emit (events.js:182:13)
at /home/csc/MagicMirror/node_modules/socket.io/lib/socket.js:528:12
at process._tickCallback (internal/process/next_tick.js:61:11)
MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
^CShutting down server…

sumrag

@paulgu Hi I am having the same issue. Were you able to resolve it?

Irfan ali

I also have same issue can anybody help me

Whoops! There was an uncaught exception…
TypeError: PythonShell is not a constructor
at Class.python_start (/home/pi/MagicMirror/modules/MMM-Facial-Recognition/node_helper.js:11:21)
at Class.socketNotificationReceived (/home/pi/MagicMirror/modules/MMM-Facial-Recognition/node_helper.js:40:14)

Irfan ali

@MichiMauch Are You using Webcam ?

naktah

specify your user labels in the environment with

export FACE_USERS=Alice,Bob,Casey,Doug

im not sure what to do with this. do i have to write this in the terminal? because everytime i restart my pi, the facial recognition doesnt recognize my face

sdetweil

@naktah u need to put that in your logon profile

naktah

@sdetweil im not sure how to do that. can you show me how? im pretty much new to this stuff and this issue has been bothering me for days now.

Sneek

@naktah after writing the following command in the terminal:

python tools.train.py

you get some output with the users you have setup (remember the order). Assuming it gives you Alice,Bob,Casey,Doug, then you run this in the terminal:

export FACE_USERS=Alice,Bob,Casey,Doug

andrewgamalkamel

@Irfan-ali yes!

SdeGeata

Error on “python capture.py”

pi@raspberrypi:~/MagicMirror/modules/MMM-Facial-Recognition-Tools $ python capture.py
Traceback (most recent call last):
  File "capture.py", line 18, in <module>
    import lib.capture as capture
  File "/home/pi/MagicMirror/modules/MMM-Facial-Recognition-Tools/lib/capture.py", line 21, in <module>
    from . import config
  File "/home/pi/MagicMirror/modules/MMM-Facial-Recognition-Tools/lib/config.py", line 15, in <module>
    (CV_MAJOR_VER, CV_MINOR_VER, mv1, mv2) = cv2.__version__.split(".")
ValueError: need more than 3 values to unpack

aniketdongare07

@SdeGeata Got the same error, did you resolve it?

sdetweil

@aniketdongare07 @SdeGeata the newer version of python only provide 3 version info strings. So that code needs to drop the 4th parm from the parse request

(CV_MAJOR_VER, CV_MINOR_VER, mv1) = cv2.

aniketdongare07

@sdetweil I tried to do what you said and in turn I got the following error:```
Traceback (most recent call last):
File “capture.py”, line 18, in
import lib.capture as capture
File “/home/pi/MagicMirror/modules/MMM-Facial-Recognition-Tools/lib/capture.py”, line 21, in
from . import config
File “/home/pi/MagicMirror/modules/MMM-Facial-Recognition-Tools/lib/config.py”, line 15, in
(CV_MAJOR_VER, CV_MINOR_VER, mv1) = cv2
TypeError: ‘module’ object is not iterable

sdetweil

@aniketdongare07 you need the rest of the line cv2… I am on my phone, so cut/paste is a pain

(CV_MAJOR_VER, CV_MINOR_VER, mv1) = cv2.__version__.split(".")

amsuvarna27

@konradwalsh
I’m using Raspberry pi CSI camera.
How to do with it.
Please help me.

OGElijah

@sdetweil Hey, buddy… I’m not sure what it is you’re telling me to do here. I wrote what you sent into the terminal but it didn’t do anything. In fact, it’s treating the = sign as a syntax error… what am I doing wrong?