MMM-FRITZ-Box-Callmonitor

[ostfilinchen]

@Jopyth: that doesn’t work. The mirror Shows me the Number, not the Name of the caller.

[Jopyth]

@ostfilinchen Can you add showContactsStatus: true, in the config, and see if it successfully loads your contacts? Either a small warning sign should appear after you restart your mirror, or a number showing how many contacts are loaded.

If the contacts load correctly, please look at the format your numbers are in the phonebook, e.g. are they like +12 (345) 678901 or 0012345678901… (do not post the real number)? I have experienced some problems with certain formatting as well, however have not had time to fix it in the code, instead I replaced my numbers in the FRITZ!Box, and always used the format 0123 4567891.

If there is a warning sign, please have a look at the logs (if you start it with pm2 you can do pm2 logs --lines 100 mm) and search for an error related to the Callmonitor.

[ostfilinchen]

@Jopyth if i Set the Contact Status to true, nothing happens. There’s no Icon and the logs displays no error.

[Jopyth]

@ostfilinchen You might have on older version can you try to use git pull and see if it updates (note: you must do this inside the MMM-FRITZ-Box-Callmonitor folder. Also you can check the date of your version with git show, it should show this:

commit 9a35b1a74811a2e7c31edb35d59bab010dd5f991
Merge: 08633e0 bfee1e5
Author: Paul-Vincent Roll <paviro@me.com>
Date:   Fri Sep 23 11:26:47 2016 +0200

[ostfilinchen]

this output i have also…

must i activate the vcard-option to show how many contacts loaded?

[Jopyth]

@ostfilinchen Please check your config again. Is your password empty (i.e. the empty string password: "")? That would not work, but otherwise it should. I did a clean install and this config works for me:

{
	module: 'MMM-FRITZ-Box-Callmonitor',
	position: 'bottom_right',
	header: "Recent calls",
	config: {
		username: "EXAMPLE_USER",
		password: "EXAMPLE_PASSWORD",
		showContactsStatus: true
	}
},

Result:

If I type a wrong password, it shows an error:

config: {
	username: "EXAMPLE_USER",
	password: "WRONG_EXAMPLE_PASSWORD",
	howContactsStatus: true
}
[...]

If you can not see either of these results, and you say your version is up-to-date, then I am little bit out of guesses. Maybe you can try complete removing the module, and downloading it again?

[ostfilinchen]

i have an fresh Installation and i don’t get this Output. If i set vcard to true, then it Shows me the little book with spinning arrows. The Password and user is set.

[Jopyth]

@ostfilinchen Please check if your option is German passwort (does not work) or password (English).

[ostfilinchen]

@Jopyth it’s password

[Jopyth]

@ostfilinchen Damn. Because I saw this in your first post. :( This was my last hope.

Edit: Can you post the output of git status one more time? Just to make sure everything is fine with your module.

[Jopyth]

@ostfilinchen In this case what we can try is some do-it-yourself debugging, i.e. add a line above line 56 of your node_helper.js

console.log(this.config.password); // should show your password as entered in config
console.log(this.config.password !== ""); // should show true

Also change line 197:

console.log("Reading " + files.length + " files from python script" ); // should probably show Reading 5 files from python script

This should add the corresponding output to your server output pm2 logs --lines 100 mm.

[ostfilinchen]

oh man. I’m so stupid… i wrote really passwort instead of password…

now it work’s. Thanks for your great help @Jopyth!!!

[kwaeksler]

hi :-)
i also have a problem with my phonebook. When i get a phone call it shows only the number of the caller, not a name.

i get a small warning sign and an “unknown error”
my config looks like:

	{
        module: 'MMM-FRITZ-Box-Callmonitor',
        position: 'top_right', 
        header: "Anrufliste", 
        config: {
			username: "************",
			password: "*************************",
			showContactsStatus: true,
			reloadContactsInterval: 1,
			deviceFilter: ["Wohnzimmer"]
        }
	},

Could you help me? :-)
Thanks in advanced,
Kwaeksler

edit: FRITZ!Box User Settings:

[ostfilinchen]

@kwaeksler Do u have a other IP Address for the fritzbox? Do you have activate the callmonitor with #965 from a connected Phone (Not the fon-app)?

[thk]

Hi,
Is there a way to show internal calls?
For external calls it´s working fine.

But I couldn´t get it to work for internal calls from a locally connected SIP phone…

[kwaeksler]

@ostfilinchen said in MMM-FRITZ-Box-Callmonitor:

@kwaeksler Do u have a other IP Address for the fritzbox? Do you have activate the callmonitor with #965 from a connected Phone (Not the fon-app)?

IP Adress for the box is 192.168.178.1 and yes i activated the callmonitor with my Siemens phone.

[ostfilinchen]

The Best way to find errors is to Start the mirror with npm start dev directly on the pi. On the right side you find Infos about the error.

[kwaeksler]

@ostfilinchen said in MMM-FRITZ-Box-Callmonitor:

The Best way to find errors is to Start the mirror with npm start dev directly on the pi. On the right side you find Infos about the error.

Mhm… i dont get any warnings or errors in the console

[ostfilinchen]

@kwaeksler if you start the mirror with pm2, what says the pm2 logs mm?

[kwaeksler]

@ostfilinchen said in MMM-FRITZ-Box-Callmonitor:

@kwaeksler if you start the mirror with pm2, what says the pm2 logs mm?

in mm-error-0.log i searched for “callmonitor” and got this error:

TypeError: path must be a string or Buffer
at TypeError (native)
at Object.fs.readFile (fs.js:303:11)
at Object.fs.readFile (ELECTRON_ASAR.js:451:25)
at Object.parseVcardFile (/home/pi/MagicMirror/modules/MMM-FRITZ-Box-Callmonitor/node_modules/vcard-json/lib/vcard-json.js:65:6)
at Class.parseVcardFile (/home/pi/MagicMirror/modules/MMM-FRITZ-Box-Callmonitor/node_helper.js:107:9)
at Class.socketNotificationReceived (/home/pi/MagicMirror/modules/MMM-FRITZ-Box-Callmonitor/node_helper.js:56:10)
at Socket. (/home/pi/MagicMirror/modules/node_modules/node_helper/index.js:98:10)
at emitTwo (events.js:106:13)
at Socket.emit (events.js:191:7)
at Socket.onevent (/home/pi/MagicMirror/node_modules/socket.io/lib/socket.js:335:8)
Missing error handler on socket.