MagicMirror² v2.7.0 is available! For more information about this release, check out this topic.

[DONE] New two way community order for all european countries - Open until 03 June 2018



  • @rufu said in New two way community order for all european countries - Open until 03 June 2018:

    Hi Chriz,

    I now realized, that I switched the width and height in the table - of course it does not matter for a regular mirror, but as I have no experience with this kind of mirrors and I want to make sure there will be no disortions if I rotate it 90 degrees 🙂

    I know it’s a stupid question, but it’s not cheapest, so I’d rather be sure.

    Thanks!

    it makes no difference 🙂



  • Hey there,

    I hope that I’m not too late, but I’d like to change the dimensions of my mirror, the table should look like this then:

    # username width (m) height (m) real area (m²) area to pay for (min. 0,4 m²) location of delivery additional comments (like polished edges) confirmed
    1 rufu 0,71 0,60 0,43 0,43 Bratislava - Slovakia polished edges
    2 blafpap 0,89 0,504 0,45 0,45 Nieuwveen - Nederland polished edges
    3 essert 1,00 0,6 0,6 0,6 Friedrichshafen - Germany polished edges
    4 derRAV3N 0,4 1,0 0,4 0,4 Billerbeck - Germany polished edges
    5 AC 0,554 0,738 0,408852 0,41 Muenchen - Germany polished edges

    So are you even gonna go through this with even 5 people buying a mirror?

    Greetings,
    Raphael



  • no problem. yes the order definitely takes place 🙂


  • Project Sponsor

    @goldjunge_chriz

    Hi again!

    I’ve decided to buy the mirror. Here you have the dimensions:

    username: @qu1que
    width: 0,60 m.
    height: 0,70 m.
    real area: 0,42 m2.
    location of delivery: Santiago de Compostela - Spain.
    additional comments: polished edges

    Do you need my email to contact with me?
    Thanks,



  • After the order is clear, I will query all relevant data of the users privately 🙂



  • Hello,

    one more last minute order:

    # username width (m) height (m) real area (m²) area to pay for (min. 0,4 m²) location of delivery additional comments (like polished edges) confirmed
    1 rufu 0,71 0,60 0,43 0,43 Bratislava - Slovakia polished edges
    2 blafpap 0,89 0,504 0,45 0,45 Nieuwveen - Nederland polished edges
    3 essert 1,00 0,6 0,6 0,6 Friedrichshafen - Germany polished edges
    4 derRAV3N 0,4 1,0 0,4 0,4 Billerbeck - Germany polished edges
    5 AC 0,554 0,738 0,408852 0,41 Muenchen - Germany polished edges
    6 Buzztiger 0,5 0,8 0,4 0,4 Huerth- Germany polished edges

    Regards

    Buzz



  • @qu1que said in New two way community order for all european countries - Open until 03 June 2018:

    @goldjunge_chriz

    Hi again!

    I’ve decided to buy the mirror. Here you have the dimensions:

    username: @qu1que
    width: 0,60 m.
    height: 0,70 m.
    real area: 0,42 m2.
    location of delivery: Santiago de Compostela - Spain.
    additional comments: polished edges

    Do you need my email to contact with me?
    Thanks,

    I will add you to the list later on the computer 🙂



  • Hi,

    I would also like to join:

    width: 0,435 m
    height: 0,62 m
    real area: 0,27 m2
    area to pay: 0,4 m2
    location of delivery: Kernen - Germany
    additional comments: polished edges

    Sorry - I don’t know how to edit the table. Thanks & regards!



  • FINAL LIST

    # username width (m) height (m) real area (m²) area to pay for (min. 0,4 m²) location of delivery additional comments (like polished edges) confirmed
    1 rufu 0,71 0,60 0,43 0,43 Bratislava - Slovakia polished edges
    2 blafpap 0,89 0,504 0,45 0,45 Nieuwveen - Nederland polished edges
    3 essert 1,00 0,6 0,6 0,6 Friedrichshafen - Germany polished edges
    4 derRAV3N 0,4 1,0 0,4 0,4 Billerbeck - Germany polished edges
    5 AC 0,554 0,738 0,408852 0,41 Muenchen - Germany polished edges
    6 Buzztiger 0,5 0,8 0,4 0,4 Huerth - Germany polished edges
    7 qu1que 0,7 0,6 0,42 0,42 Santiago de Compostela - Spain polished edges
    8 bierfilzl 0,62 0,435 0,27 0,4 Kernen - Germany polished edges

  • Project Sponsor

    Hello @Goldjunge_Chriz, I’ve received the mirror today. I liked it a lot, only that I had made up the idea that it was a little thicker, but even better for the piece of furniture that I am building (I will put pictures in the “show your mirror” section of the forum when is finished).

    I just wanted to ask you a question, in one of the faces of the mirror, there is a film of very fine material, which can be extracted. Does that mean there is one face through which you look better than the other? Or in other words, what is the purpose of protecting only one of the faces with that film? (I put a picture of it)

    0_1533241687008_photo_2018-08-02_21-34-02.jpg

    Regards and thank you very much for the management!