Read the statement by Michael Teeuw here.
Problem updating to v2.3.1
-
Just tried to update today to v2.3.1 and got the following error when running “git pull” in the ~/MagicMirror directory
Removing tests/unit/translations/same_keys.js
Removing tests/unit/functions/class_spec.js
Auto-merging modules/default/currentweather/README.md
CONFLICT (content): Merge conflict in modules/default/currentweather/README.md
Automatic merge failed; fix conflicts and then commit the result.Anyone got any ideas as to what I may be doing wrong ? (I’m running 2 mirrors, and both have the same error)
-
I did not attempt to update, but you could try to delete/rename/move the file it could not merge and try again
-
get the same error when upgrading - I just did: git pull && npm install
how do I find what the conflicts are? -
@Kristianson
if you have the same error as @Bobhave you deleted or renamed the readme file under “/home/pi/MagicMirror/modules/default/currentweather/README.md”
-
Not exactly the same, that’s the problem it does not say what’s conflicting:
pi@raspberrypi_7:~/MagicMirror $ sudo git pull && npm install
error: Pulling is not possible because you have unmerged files.
hint: Fix them up in the work tree, and then use 'git add/rm ’
hint: as appropriate to mark resolution and make a commit.
fatal: Exiting because of an unresolved conflict.
pi@raspberrypi_7:~/MagicMirror $ -
@Kristianson
did you run git reset --hard and then git pull && npm install -
No, tried that and a bit more info:
pi@raspberrypi_7:~/MagicMirror $ git reset
Unstaged changes after reset:
M .eslintrc.json
M .travis.yml
M CHANGELOG.md
M README.md
M installers/raspberry.sh
M js/class.js
M js/main.js
M js/module.js
M js/translator.js
M modules/README.md
M modules/default/alert/README.md
M modules/default/calendar/README.md
M modules/default/calendar/calendarfetcher.js
M modules/default/calendar/vendor/ical.js/test/test.js
M modules/default/compliments/README.md
M modules/default/compliments/compliments.js
M modules/default/currentweather/README.md
M modules/default/currentweather/currentweather.js
M modules/default/newsfeed/README.md
M modules/default/newsfeed/fetcher.js
M modules/default/newsfeed/newsfeed.js
M modules/default/updatenotification/updatenotification.js
M modules/default/weatherforecast/weatherforecast.js
M package-lock.json
M package.json
M tests/configs/check_config.js
D tests/unit/functions/class_spec.js
M tests/unit/functions/cmp_versions_spec.js
D tests/unit/translations/same_keys.js
M translations/af.json
M translations/bg.json
M translations/ca.json
M translations/cs.json
M translations/cy.json
M translations/da.json
M translations/de.json
M translations/en.json
M translations/es.json
M translations/et.json
M translations/fi.json
M translations/fr.json
M translations/hu.json
M translations/id.json
M translations/is.json
M translations/kr.json
M translations/nb.json
M translations/nl.json
M translations/nn.json
M translations/pl.json
M translations/pt.json
M translations/ro.json
M translations/ru.json
M translations/sv.json
M translations/zh_cn.json
pi@raspberrypi_7:~/MagicMirror $ git pull && npm install
error: Your local changes to the following files would be overwritten by merge:
.eslintrc.json
.travis.yml
CHANGELOG.md
README.md
installers/raspberry.sh
js/class.js
js/main.js
js/module.js
js/translator.js
modules/README.md
modules/default/alert/README.md
modules/default/calendar/README.md
modules/default/calendar/calendarfetcher.js
modules/default/calendar/vendor/ical.js/test/test.js
modules/default/compliments/README.md
modules/default/compliments/compliments.js
modules/default/currentweather/README.md
modules/default/currentweather/currentweather.js
modules/default/newsfeed/README.md
modules/default/newsfeed/fetcher.js
modules/default/newsfeed/newsfeed.js
modules/default/updatenotification/updatenotification.js
modules/default/weatherforecast/weatherforecast.js
package-lock.json
package.json
tests/configs/check_config.js
tests/unit/functions/cmp_versions_spec.js
translations/af.json
translations/bg.json
translations/ca.json
translations/cs.json
translations/cy.json
translations/da.json
translations/de.json
translations/en.json
translations/es.json
translations/et.json
translations/fi.json
translations/fr.json
translations/hu.json
translations/id.json
translations/is.json
translations/kr.json
translations/nb.json
translations/nl.json
translations/nn.json
translations/pl.json
translations/pt.json
translations/ro.json
translations/ru.json
translations/sv.json
translations/zh_cn.json
Please commit your changes or stash them before you merge.
error: The following untracked working tree files would be overwritten by merge:
dangerfile.js
fonts/yarn.lock
module-types.ts
tests/configs/data/StripComments.json
tests/configs/data/TranslationTest.json
tests/configs/data/en.json
tests/e2e/translations_spec.js
tests/unit/classes/class_spec.js
tests/unit/classes/deprecated_spec.js
tests/unit/classes/translator_spec.js
tests/unit/classes/utils_spec.js
vendor/yarn.lock
yarn.lock
Please move or remove them before you merge.
Aborting
pi@raspberrypi_7:~/MagicMirror $Where are these files? Should I just remove them?
-
@Kristianson
Did you solve the problem, have you rungit reset --hard -
Hi! Thank you for checking… I ran the git reset --hard and then the git pull && npm install but shorter error now… not sure if I should just remove the files? Never had this problem before:
pi@raspberrypi_7:~/MagicMirror $ sudo git reset --hard
HEAD is now at 532143c Merge pull request #1149 from bonaime/patch-1
pi@raspberrypi_7:~/MagicMirror $ sudo git pull && npm install
error: The following untracked working tree files would be overwritten by merge:
dangerfile.js
fonts/yarn.lock
module-types.ts
tests/configs/data/StripComments.json
tests/configs/data/TranslationTest.json
tests/configs/data/en.json
tests/e2e/translations_spec.js
tests/unit/classes/class_spec.js
tests/unit/classes/deprecated_spec.js
tests/unit/classes/translator_spec.js
tests/unit/classes/utils_spec.js
vendor/yarn.lock
yarn.lock
Please move or remove them before you merge.
Aborting
pi@raspberrypi_7:~/MagicMirror $ -
Not sure what I’ve done but when I run a git pull I now have a message that says I need to run “git commit -a” to fix the issues.
What would happen if I did that ? Would it overwrite the main branch, or just create my own version of that branch ? I don’t have a git account, so would that cause issues as well ?
-
@Kristianson
move or remove the files belowdangerfile.js fonts/yarn.lock module-types.ts tests/configs/data/StripComments.json tests/configs/data/TranslationTest.json tests/configs/data/en.json tests/e2e/translations_spec.js tests/unit/classes/class_spec.js tests/unit/classes/deprecated_spec.js tests/unit/classes/translator_spec.js tests/unit/classes/utils_spec.js vendor/yarn.lock yarn.lockand then run
git pull && npm install -
removed those and now:
pi@raspberrypi_7:~/MagicMirror $ sudo git pull && npm install
Removing tests/unit/translations/same_keys.js
Removing tests/unit/functions/class_spec.js
Auto-merging modules/default/currentweather/README.md
CONFLICT (content): Merge conflict in modules/default/currentweather/README.md
Automatic merge failed; fix conflicts and then commit the result.Perhaps I should just re-install it? I even removed the currentweather default module (directory and the files)…
-
With any of the default modules… If you made any changes to the .js files or the README.md files, AND, you would like to keep those changes… TRY THIS:
cut and paste any of the default modules from the MagicMirror directory to any other directory.
You also need to do the same for the package.json, package-lock.json, and your config.js file if there are any additional modules that have been added.then do the ‘git pull $$ npm install’
when it is done, replace those files in the new MagicMirror that just got installed with the ones you saved from your old MagicMirror.
then do ‘npm rebuild’
It took a couple of times starting the MagicMirror to get all the changes to take…
this also fixes the currentweather module problem…
and the blank screen problem…
-
Thank your for the reply. I will give that a try… failing that I am going to re-install it…
-
Well, I couldn’t get it to work, so I just did a rebuild of the 2 mirrors. I keep a base build of the MM image anyway, so it only took an hour to recreate them both from scratch.
-
So I reinstalled it, however now when the MagicMirror starts the screen is just black…
-
@Bob said in Problem updating to v2.3.1:
Not sure what I’ve done but when I run a git pull I now have a message that says I need to run “git commit -a” to fix the issues.
What would happen if I did that ? Would it overwrite the main branch, or just create my own version of that branch ? I don’t have a git account, so would that cause issues as well ?
I ran the “git commit -a”, exited that screen, then ran sudo git pull & npm install and it worked for me then…Had the same issues above before that
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login