Changing icons of the modules Current Weather and Weather Forecast

[sdetweil]

@Manu85 I don’t think the ISS-live module can do that, as it calls an api to get the images

[Manu85]

@sdetweil ah ok I will try, you are my master

[sdetweil]

@Manu85 there are other modules too… (note that you can push the iframe right up against the ISS-live output, so they LOOK like they are together…) a little css borders and padding… maybe other stuff…

[Manu85]

@sdetweil ok, I will try both solutions

[Manu85]

@sdetweil just copying the link doesn’t work

[sdetweil]

@Manu85 i don’t know… I put it in smartwebdisplay

[Manu85]

@sdetweil I’ll try

[sdetweil]

@Manu85 here is the module config I used
I took the size from the original web page

{
		module: 'MMM-SmartWebDisplay',
		position: 'middle_center',	// This can be any of the regions.
		config: {
			// See 'Configuration options' for more information.
			logDebug: false, //set to true to get detailed debug logs. To see them : "Ctrl+Shift+i"
			height:"350px", //hauteur du cadre en pixel ou %
			width:"650px", //largeur
               		updateInterval: 0, //in min. Set it to 0 for no refresh (for videos)
                	NextURLInterval: 0.5, //in min, set it to 0 not to have automatic URL change. If only 1 URL given, it will be updated
                	displayLastUpdate: true, //to display the last update of the URL
					displayLastUpdateFormat: 'ddd - HH:mm:ss', //format of the date and time to display
                	url: ["https://isstracker.spaceflight.esa.int/"], //source of the URL to be displayed
					scrolling: "no", // allow scrolling or not. html 4 only
					shutoffDelay: 10000 //delay in miliseconds to video shut-off while using together with MMM-PIR-Sensor
			}
	},

I didn’t change anything other than size and url
there could be other settings needed…

[Manu85]

@sdetweil I did like you I see the image clearly on the MM, but it disappears every 3 seconds then recharges continuously, the green LED of the raspberry is lit very often, as if the module required a lot of resources from the pi

[Manu85]

@sdetweil I found, you have to set this setting to “0”, otherwise it reloads every 30 seconds

NextURLInterval: 0,

[Manu85]

@sdetweil Hello Sam, I still need your help, I saw KristjanESPERANTO’s module: MMM-OneCallWeather which I really like, so I installed this module I copied his example from js.config which I have completed with my elements longitude, latitude apy key, I tested my api key on the internet in version 2.5 and it works, so I changed the version in MMM-OneCallWeather.js, as Kristjan explains in the github, and when I restart the MM it notifies loading and nothing happens, I tried to understand, but I’m stuck, so I call a specialist :-)

[sdetweil]

@Manu85 said in Changing icons of the modules Current Weather and Weather Forecast:

-OneCall

OneCall requires the v3 key and api as I understand it…

[Manu85]

@sdetweil In detail he says this:
(apiVersion The OpenWeatherMap API version to use. Change it to “2.5” if you have an old apikey

Default value: 3.0)
I understood that if we had an old version then we had to change this parameter but I may have misinterpreted

[Manu85]

@sdetweil when I connect to an internet page it gives me this, so I think it’s active, I entered lat, long and api key

[sdetweil]

@Manu85 as far as I can tell, the one call API with keys since mid 2023 is only available via the v3.0 apikey setting

[Manu85]

@sdetweil So it pays?

[Manu85]

@sdetweil on my weather module I have an api key 2.5, I don’t know if that’s it but I have the impression that the weather data is wrong. Do you know of a weather module for the MM with current and forecast that would be graphically nice and free? because if to have version 3.0 you have to pay that doesn’t interest me, thank you for your help

[sdetweil]

@Manu85 in the console (where u start magicmirror, npm start )

you might see

[23.01.2024 12:12.22.384] [LOG]   [MMM-OneCallWeather] 23-Jan-24 12:12 ** ERROR ** Error: Unauthorized

if you are using the wrong api key

[sdetweil]

@Manu85 the page says v3 api, and 1000 calls per day free

[Manu85]

@sdetweil Yes I went to this page, but then they ask you for your bank card!!!