MMM-Hotword

[costascontis]

@Sean i nicely use assistantmk2 with Hotword and i noticed that if i trigger assistant with hotword and for some reason get “conversation error” then hotword stops triggering but assistant works fine if i press the icon with the mouse.I have to restart MM to get hotword working again.Its not happening all the time but 1 maybe 2 times in the day.Any advice?

[A Former User]

@costascontis
I need error logs and configurations for details.

[sdetweil]

@cjdzombie i just installed MMM-Hotword, and had the errors documented in the install.

I followed the steps exactly, cutting and pasting, and those issues were resolved… MMM-Hotword works perfectly now

[Artech]

@Sean at first thank you for your module however I have some difficulties in installing the snowboy library if you or someone else has a procedure I will follow it

[berne]

mmm i notis i have a update, how do i get it?

[A Former User]

@berne If you have no issue on your usage, you don’t need to update. Nothing important is not updated.

[berne]

@Sean
running MM v2.8.0
dont running 2.0 on this

[A Former User]

@berne The easiest way is, reinstall freshly.

[berne]

@berne i iam happy using the old one, know how hard it was to get i all set up. a qick questien… how do i change the screen size on the MM? i just geting it in the middel and not full scale

[t.architecture99]

This post is deleted!

[A Former User]

@t-architecture99

icons: { //https://iconify.design/icon-sets/
      waiting: "uil-comment-message",
      detected: "uil-comment-exclamation",
      finished: "uil-comment-dots",
},

https://iconify.design/icon-sets/

[Mrtrol2013]

Does this module support Russian?

[A Former User]

i think yes, MMM-Hotword should be supported

[cheun]

Hello everybody,

Today I tried to install MMM-Hotword from https://github.com/eouia/MMM-Hotword.git but I get à 404 error.
It seems the page has been moved or disabled.
If so, could someone send me the contents of the git?
Thank you in advance for your help!

[A Former User]

hummm, yes I have disabled it.
but why do you want to use it ?

[cheun]

@Bugsounet Hello,
I just wanted to use this module to custom my magic mirror hotword détection.

Sorry for my numb question but why disable this fantastic module? Or is there a new one updated?
Thank you so much

[hayman]

@berne said in MMM-Hotword:

m happy using the old one, know how hard it was to get i all set up. a qick questien… how do i change the screen size on the M

hello ,im trying to update the MMM-Hotword but keep asking the user&pw of the site after entering them i get wrong psww …?
is there any other wat to update it …?
thanks

[A Former User]

@cheun: give me a good example of use ? (If you don’t use an assistant)

@hayman : It seems you are using an assistant so … It’s not needed. You can use ONLY one detector at once

[sdetweil]

@hayman those are YOUR user Id and password on GitHub, right?

[cheun]

@Bugsounet
Thank you for your answer.
I only want to make a smart mirror with a Google assistant (MMM-AssistantMk2) with a custom hotword.
I followed this tutorial :
https://github.com/makepluscode/rpi-tutorial-advanced/tree/master/008-raspbian-magicmirror-google-assistant-latest
I followed it except I’m running on Buster (vs Stretch in the tuto).
I guess things have changed since the year of publication of this tutorial.
Hope I answerd your question.