MMM-DarkSkyForecast - Yet ANOTHER weather module

nobita

@trividar how to hide "Power by Darksky " I change custom.css like this
.MMM-DarkSkyForecast .attribution {
color:black; }

trividar

@nobita Thank you!

t.architecture99

i cant git clone and install , what can i do ?

sdetweil

@t-architecture99 hm… never asks for my username

Stoffbeuteluwe

@t-architecture99

git clone https://github.com/jclarke0000/MMM-DarkSkyForecast.git. wrong
git clone https://github.com/jclarke0000/MMM-DarkSkyForecast.git right

the Point at the end is the Problem

sdetweil

@Stoffbeuteluwe nice catch!

t.architecture99

@Stoffbeuteluwe many thanks to you ^^

Cynic

Thanks for such a beautiful module! Looks great. Is it possible to position the module horizontally?

Robtrowb

0_1569608415077_Screen Shot 2019-09-27 at 2.19.06 PM.png

I can’t figure out how to make the temperature row fonts bigger

The 80/49 0% 6 mph

RT

BD0G

Latest version of Magic Mirror on Raspberry Pi Zero W.
Git cloned directory for MMM-DarkSkyForecast. Directory created under MagicMirror/Modules. Ran npm install. . Installed and mentioned 16 severe vulnerabilities.
Whatever?
Modified /config/config.js with entries from git hub repositiory instructions.
Ran linter against config.js. No lint :)
Restarted Magic Mirror. Module does not display. Here is my config.js

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information how you can configurate this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "0.0.0.0", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: [], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],
	
	language: "en",
	timeFormat: 12,	
	units: "imperial",
	// serverOnly:  true/false/"local" ,
			     // local for armv6l processors, default 
			     //   starts serveronly and then starts chrome browser
			     // false, default for all  NON-armv6l devices
			     // true, force serveronly mode, because you want to.. no UI on this device
	
	modules: [
		 {
        		module: 'MMM-Remote-Control',
        		// uncomment the following line to show the URL of the remote control on the mirror
        		position: 'bottom_left',
        		// you can hide this module afterwards from the remote control itself
        		config: {
            		apiKey: '56cab4b5d5e24cfea8c436ac591d722c'
        	}
    		},
		{
  			module: "MMM-DarkSkyForecast",
  			header: "Weather",
  			position: "top_right",
  			classes: "default everyone",
  			disabled: false,
  			config: {
    			apikey: "not gonna share it :)",
    			latitude: "39.164581",
    			longitude: "-119.766922",      
    			iconset: "4c",
    			concise: false,
    			forecastLayout: "table"
  		}		
		},
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"					}
				]
		}
		},
		
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

sdetweil

@BD0G open the developers window ctrl-shift-i on the keyboard. Select the console tab and scroll up to see any errors, usually red text.

BD0G

I press CTRL-SHIFT-I with Magic Mirror Running and no console is presented. Actually there is no change at all. Its as if I have not pressed any keys.

sdetweil

@BD0G the right side should open up as white.

Do this

pm2 stop 0
cd ~/MagicMirror
npm start dev

That will start mm with the dev window open

sdetweil

@BD0G last letter is i , lower case (ice), not L lowercase

BD0G

Yup. Thats what I pressed CTRL-SHIFT-lowercase i. Nothing. Strange eh? I will try the method above.

BD0G

Well that did not display the DEV console either. Just Magic Mirror standard display. I have my display rotated 90 degree’s if thats a concern. So its in Portrait Mode essentially and not Landscape.

BD0G

Ahh looks like the console was behind Magic Mirror and has these entries.

sdetweil

@BD0G yeh, don’t know what happens in portrait mode

BD0G

[16:51:14.569] [LOG] Starting MagicMirror: v2.10.0-develop
[16:51:14.714] [LOG] Loading config …
[16:51:14.985] [LOG] Loading module helpers …
0 [LOG] Initializing new module helper …
0 [LOG] Module helper loaded: MMM-Remote-Control
0 [LOG] No helper found for module: MMM-DarkSkyForecast.
0 [LOG] No helper found for module: alert.
[16:51:16.448] [LOG] Initializing new module helper …
[16:51:16.469] [LOG] Module helper loaded: updatenotification
[16:51:16.486] [LOG] No helper found for module: clock.
[16:51:21.582] [LOG] Initializing new module helper …
[16:51:21.589] [LOG] Module helper loaded: calendar
0 [LOG] All module helpers loaded.
[16:51:21.619] [LOG] Starting server on port 8080 …
[16:51:21.765] [INFO] You’re using a full whitelist configuration to allow for all IPs
0 [LOG] Server started …
0 [LOG] Connecting socket for: MMM-Remote-Control
0 [LOG] Starting node helper for: MMM-Remote-Control
0 [LOG] Connecting socket for: updatenotification
0 [LOG] Connecting socket for: calendar
0 [LOG] Starting node helper for: calendar
0 [LOG] Sockets connected & modules started …
0 [LOG]
Ready to go! Please point your browser to: http://0.0.0.0:8080
Starting chromium browser now, have patience, it takes a minute
[16:51:23.548] [ERROR] { Error: listen EADDRINUSE: address already in use 0.0.0.0:8080
at Server.setupListenHandle [as _listen2] (net.js:1280:14)
at listenInCluster (net.js:1328:12)
at doListen (net.js:1461:7)
at process._tickCallback (internal/process/next_tick.js:63:19)
at Function.Module.runMain (internal/modules/cjs/loader.js:834:11)
at startup (internal/bootstrap/node.js:283:19)
at bootstrapNodeJSCore (internal/bootstrap/node.js:623:3)
code: ‘EADDRINUSE’,
errno: ‘EADDRINUSE’,
syscall: ‘listen’,
address: ‘0.0.0.0’,
port: 8080 }
[16:51:29.611] [ERROR] ERROR! Could not find main module js file for MMM-darkSkyForecast

sdetweil

@BD0G said in MMM-DarkSkyForecast - Yet ANOTHER weather module:

[16:51:23.548] [ERROR] { Error: listen EADDRINUSE: address already in use 0.0.0.0:8080

ah, you have the old one running still

pm2 start 0

check to make sure its shut down

ps -ef | grep node