[MMM-Remote-Control](v2-dev) Extensible REST API, Dynamic Menus, and Socket Communications, plus other updates

[sdetweil]

@swvalenti so there is no branch called ‘master’

[swvalenti]

@sdetweil oh boy that is odd, how do I get the master back?

[sdetweil]

@swvalenti rename the current folder/directory out of the way, and git clone the remote repo (your fork or his ) again.

then get to the right branch, and then copy any modified files from the saved repo into this new copy,
once complete, remove the old saved directory

[sdetweil]

@swvalenti the master repo has master and develop as branches

[shbatm]

@cr4z33 try adding them using the customCommands config setting (see the develop branch README.

[Cr4z33]

@shbatm OK thanks I will try that tomorrow.

[Cr4z33]

@shbatm said in [MMM-Remote-Control](v2-dev) Extensible REST API, Dynamic Menus, and Socket Communications, plus other updates:

@cr4z33 try adding them using the customCommands config setting (see the develop branch README.

I set the dev branch module like the following:

		{
			module: 'MMM-Remote-Control',
			disabled: false,
			customCommand: {
					monitorOnCommand: 'echo on 0 | cec-client -s -d 1',
					monitorOffCommand: 'echo standby 0 | cec-client -s -d 1',
					monitorStatusCommand: 'echo pow 0 | cec-client -s -d 1'
					}
		},

None of the commands are working. :confused_face:
I get the ‘Done’ message, but then nothing happens…

The syntax is 100% correct and working if used in the terminal.

[mohace]

Hi, I can’t see newsfeed options in Module Controls.
Can you help me please?

[Cr4z33]

@mohace I can.

Double check if you edited anything or try deleting and reinstalling the module?

[bolish]

Hi @shbatm
I already asked this question on git issues on Jopyth’s version but I just figured out that you are the guy behind the custom menu!

Would it be possible to have an action item for a menu?

I mean, when you click on the menu, it opens the menu but also as the ability to trigger an action.

Regards

[bolish]

@Cr4z33
Please check the output of echo pow when your screen is on and off.
The original setting related to screen status into the node.js was NOK for me. (indeed, it is something like “ON” / “OFF” / “HDMI” etc…) but my TV was answering with “power status: on” and “power status: standby”.
So I had to modify line 610 and 620 with my own.

BTW, @shbatm , would be better if those parameters could be configurable also.

Regards

[mohace]

@Cr4z33 said in [MMM-Remote-Control](v2-dev) Extensible REST API, Dynamic Menus, and Socket Communications, plus other updates:

@mohace I can.

Double check if you edited anything or try deleting and reinstalling the module?

I meant not in that menu but in

[Cr4z33]

@bolish OK, but you have to tell me how to do it. :smiling_face_with_open_mouth_cold_sweat:

By the way I have problems turning on and off my TV too.
Even if I edited files to enter the needed CEC commands somehow it doesn’t work (same commands in terminal work fine).

@mohace huh?
I don’t have those menu’s entries at all.
Are you using a custom version of the module or? :confused_face:

[bolish]

@Cr4z33
Make trials with your terminal :

• Turn screen on by pasting that in your terminal : echo on 0 | cec-client -s -d 1
• Check the feedback status sent by the TV by putting that in terminal : echo pow 0 | cec-client -s -d 1
• Remind the result

Do exactly the same with turn off :

• Turn screen on by pasting that in your terminal : echo standby 0 | cec-client -s -d 1
• Check the feedback status sent by the TV by putting that in terminal : echo pow 0 | cec-client -s -d 1
• Remind the result

The 2 results you will get should be updated in node.js line 610 / 620.

[Cr4z33]

@bolish as I wrote before that’s EXACTLY what I already did. ;)

Terminal commands work straight away while the same commands in MMM-Remote-Control have no effect when used by tapping the buttons in the menu.

[bolish]

@Cr4z33
So, the ouput you got in the terminal by sending the “pow 0” command is in line with what is written into node helper.js line 610 / 620?

[Cr4z33]

@bolish yep 100% that’s why I tried reporting that to @shbatm , but he didn’t reply about that yet. :grimacing_face:

[bolish]

@Cr4z33
Strange, it worked for me… FMI, what output do you get in the terminal with “echo pow 0 | cec-client -s -d 1”.
When the screen is ON? When the screen is “OFF”?

[Cr4z33]

@bolish depending wheter the TV is on or off it says power status: on or power status: standby.

[bolish]

@Cr4z33 same as me…let’s try to cross check our node helper .js to see if they are written the same on line 610 and 620.