Read the statement by Michael Teeuw here.
MMM-voice ugly hdmi banner
-
@sdetweil u start the motion tool with sudo motion &
And u can see it’s actions in /var/log/motion/motion.log
The tail command will show you the last few lines (default 20) of a file
-
@sdetweil i’ll have a look tomorrow, thanks very much for your help much appreciated for your help
-
@sdetweil not sure its supposed to look like this
pi@raspberrypi:~ $ sudo motion & [1] 28276 pi@raspberrypi:~ $ [0:motion] [ALR] [ALL] conf_load: could not open configfile /usr/local/etc/motion/motion.conf: No such file or directory [0:motion] [CRT] [ALL] conf_load: No config file to process, using default values [0:motion] [NTC] [ALL] motion_startup: Using default log level (NTC) (6) [0:motion] [NTC] [ALL] motion_startup: Logging to syslog [0:motion] [NTC] [ALL] motion_startup: Motion 4.2.1+git20181209-7bd179c Started [0:motion] [NTC] [ALL] motion_startup: Using default log type (ALL) [0:motion] [NTC] [ALL] motion_startup: Using log type (ALL) log level (NTC) [0:motion] [NTC] [ENC] ffmpeg_global_init: ffmpeg libavcodec version 57.64.101 libavformat version 57.56.101 [0:motion] [NTC] [ALL] translate_init: Language: English [0:motion] [NTC] [ALL] motion_start_thread: Camera ID: 0 Camera Name: (null) Device: /dev/video0 [0:motion] [NTC] [ALL] main: Waiting for threads to finish, pid: 28281 [1:ml1] [NTC] [ALL] motion_init: Camera 0 started: motion detection Enabled [1:ml1] [NTC] [VID] vid_start: Opening V4L2 device [1:ml1] [NTC] [VID] v4l2_device_open: Using videodevice /dev/video0 and input -1 [1:ml1] [NTC] [VID] v4l2_device_capability: - VIDEO_CAPTURE [1:ml1] [NTC] [VID] v4l2_device_capability: - READWRITE [1:ml1] [NTC] [VID] v4l2_device_capability: - STREAMING [1:ml1] [NTC] [VID] v4l2_input_select: Name = "ov534"- CAMERA [1:ml1] [NTC] [VID] v4l2_norm_select: Device does not support specifying PAL/NTSC norm [1:ml1] [NTC] [VID] v4l2_pixfmt_select: Configuration palette index 17 (YU12) for 640x480 doesn't work. -
@dazza120 Hey Dazza. Post it in the code-block you can use in the editor. Otherwise it’s hard to read your code/output.
-
@mdhenriksen not sure why it came out like that but i am doing it via vnc on my phone lol thank you that should be sorted now
-
@dazza120 Hm… mine says
[-1191364720:motion] [NTC] [ALL] conf_load: Processing thread 0 - config file /etc/motion/motion.conf -
@sdetweil hi for some reason I have no motion.conf file in there, but I was getting tones of video clips stored in /home/Pi folder, can you tell me the best remove command for motion project as I’ll start again from scratch and looking at one of the files in the home/Pi folder it said
Install complete! The default configuration file, motion-dist.conf, has been
installed to /usr/local/etc/motion. You need to rename/copy it to motion.conf
for Motion to find it. More configuration examples as well as init scripts
can be found in /usr/local/share/motion/examples. -
@dazza120 weird… if u installed with
apt-get install motion
then the command is
apt-get --purge remove motion -
@sdetweil thanks done that, i seem to have a motion folder in this location /usr/local/etc/motion is the a folder that the pi had before do you know?
-
@dazza120 that is what u posted in the prior message
/usr/local/etc/motion/
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login