Config.fs

[scoller]

I have recently downloaded the magicmirror project and started to edit the config.js sample file. After i wrote in my information such as, weather, calendar, and compliments I tried to re start the project. The project started with still a notice saying edit you config file and I cant figure out where this problem comes from. A good thing to know is that the config.js file was the sample file so I saved it with out the sample. I have also run the code through the jshint and it says alot of things that idon’t understand :). PLEASE can someone help me

[lavolp3]

@scoller said in Config.fs:

. I have also run the code through the jshint and it says alot of things that idon’t understand :). PLEASE can someone help me

Well for that we’d need to know what jshint says :-)
Can you please post your config.js here (WITHOUT sensitive data please)

And for the next time:
In the magicmirror directory you can put in

npm run config:check

and it will also give you the errors in the config.
You can then look up the lines using e.g.

sudo nano -c config/config.js

which will add the columns to nano

[scoller]

Thank you very much here is my config:

/* Magic Mirror Config Sample
*

• By Michael Teeuw http://michaelteeuw.nl
• MIT Licensed.
• For more information how you can configurate this file
• See https://github.com/MichMich/MagicMirror#configuration

*/

var config = {
address: “localhost”, // Address to listen on, can be:
// - “localhost”, “127.0.0.1”, “::1” to listen on loopback interface
// - another specific IPv4/6 to listen on a specific interface
// - “”, “0.0.0.0”, “::” to listen on any interface
// Default, when address config is left out, is “localhost”
port: 8080,
ipWhitelist: [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”], // Set [] to allow all IP addresses
// or add a specific IPv4 of 192.168.1.5 :
// [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “::ffff:192.168.1.5”],
// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
// [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “::ffff:192.168.3.0/28”],

language: "en",
timeFormat: 24,
units: "metric",

modules: [
	{
		module: "alert",
	},
	{
		module: "updatenotification",
		position: "top_bar"
	},
	{
		module: "clock",
		position: "top_left"
	},
	{
		module: "calendar",
		header: "Uppkommande Högtider",
		position: "top_left",
		config: {
			calendars: [
				{
					symbol: "calendar-check",
					url: "http://www.calendarlabs.com/templates/ical/us-holidays.ics"
				}
			]
		}
	},
	{
		module: "compliments",
		position: "lower_third"
	},
	{
		module: "currentweather",
		position: "top_right",
		config: {
			location: "Alsike,Sweden",
			locationID: "2726470"
			appid: "c17305e68b5d2b54d3f2c8b5e2cc4002"
		}
	},
	{
		module: "weatherforecast",
		position: "top_right",
		header: "Vädret i Framtiden",
		config: {
			location: "Alsike,Sweden",
			locationID: "2726470"
			appid: "c17305e68b5d2b54d3f2c8b5e2cc4002"
		}
	},
	{
		module: "newsfeed",
		position: "bottom_bar",
		config: {
			feeds: [
				{
					title: "New York Times",
					url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
				}
			],
			showSourceTitle: true,
			showPublishDate: true
		}
	},
]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== “undefined”) {module.exports = config;}

[A Former User]

@scoller said in Config.fs:

locationID: “2726470”

comma missed.

99% of configuration failure was due to this mistake.

[scoller]

@sean thank you

[scoller]

@sean how do i know where the comma should be? I know im stupid :)

[lavolp3]

@sean said in Config.fs:

comma missed.

A classic!

[A Former User]

@scoller
In {} (object) and [] (array), there could be several items. Each item should be separated by comma,. Only last item could omit ,.
By example

someObject: {
  someProperty: someValue ,
  anotherProperty: anotherValue ,
  lastProperty: lastValue
}, //< - this object also could be an element of other list
someArray: [
  someElement, 
  otherElement, 
  lastElement //< - you can omit comma here.
] // < - You can omit last comma of list.

[scoller]

@sean so you mean like {nothing,nothing}?

[A Former User]

@scoller right.