You can look here

@lavolp3 Thank you for the quick response. Ill update as soon as i can.

@darbos have you tried shift + cntrl + i? Select the consol tab and scroll up and see if there are any errors. They are usually in red text.

@scoller
You’ve missed comma after locationID: "2726470" so, just adding it would be enough, but you’d said you couldn’t find where they are, so I told you to exchange whole section.

@chaseb1357

You’re welcome. Enjoy your mirror

@Shrike Since I don’t use a cam to my setup I can’t really tell.

But I guess the easiest is going all Raspberry PI (stock power supply, raspberry camera and a pi 3)

@broberg Thanks thats exactly what it was

Please post your config.js file so that we may take a look at it. Please remember to use the markdown features of the forum while you’re at it. :)

Regarding the ‘keyboard and mouse’ part in your post … I use a wireless set. So the rPi is mounted behind the monitor and only has 2 wires on it: power and HDMI. There’s a USB dongle plugged in that’s for the keyboard and mouse which I rarely use. Specially since I log in remotely. The only time I need the mouse or keyboard is if something bad happened and the rPi won’t boot up normally. But other than that, not needed.

@MichMich, yes I know that. However I’m still “the new guy” here. :)

Ok, I did find a solution on a different forum in the interweb that did work. I post it here, so that if someone else is looking for the same thing, try the following:

Before we start, I did this on a raspberry pi 3, there are a lot of solutions, but most of them don’t work on the pi3.

To prevent the pi from going black, I used a little porgam thats called set.

apt-get install x11-xserver-utils

No you have to open the file: /etc/xdg/lxsession/LXDE/autostart,.

Put the following stuff in it:

xset s off # don't activate screensaver xset -dpms # disable Energy Star features xset s noblank # don't blank the video device

Possibly also comment out the line that says @xscreensaver -no-splash, so the file should now look like this:

@lxpanel --profile LXDE @pcmanfm --desktop --profile LXDE # @xscreensaver -no-splash xset s off xset -dpms xset s noblank

As well make sure you did the stuff from the wiki in the /etc/kbd/config. In this file the following values should be set to the following:

BLANK_TIME=0 BLANK_DPMS=off POWERDOWN_TIME=0

After you did all this, /reboot the pi.

this worked for me… :-)

cheers, Flo