Blank screen issue ( another one again ) after one hour or so...

ejay-ibm

Once the screen goes OFF

module.js:198 				MMM-Hotword is suspended.
module.js:198				MMM-PIR-Sensor is suspended.
module.js:198 				clock is suspended.
module.js:198 				MMM-AssistantMk2 is suspended.
module.js:198 				MMM-Traffic is suspended.
module.js:198 				MMM-Hue is suspended.
module.js:198 				MMM-DarkSkyForecast is suspended.
module.js:198 				mmm-systemtemperature is suspended.
module.js:198 				newsfeed is suspended.
received TRAFFIC_COMMUTE 	MMM-Traffic.js:273

I Get now blank screen . Nothing happens in the log/dev console

Now I moove and screen goes ON , but MM still blank I say “Jarvis” and the console logs shows.

clock received a module notification: ASSISTANT_ACTIVATE from sender: MMM-Hotword
module.js:154 clock received a module notification: HOTWORD_PAUSE from sender: MMM-AssistantMk2
module.js:154 MMM-Traffic received a module notification: HOTWORD_PAUSE from sender: MMM-AssistantMk2
module.js:154 MMM-Hue received a module notification: HOTWORD_PAUSE from sender: MMM-AssistantMk2
module.js:154 MMM-DarkSkyForecast received a module notification: HOTWORD_PAUSE from sender: MMM-AssistantMk2
module.js:154 mmm-systemtemperature received a module notification: HOTWORD_PAUSE from sender: MMM-AssistantMk2
newsfeed.js:340 newsfeed - received notification: HOTWORD_PAUSE
newsfeed.js:391 newsfeed - unknown notification, ignoring: HOTWORD_PAUSE
module.js:154 MMM-Traffic received a module notification: ASSISTANT_ACTIVATE from sender: MMM-Hotword
module.js:154 MMM-Hue received a module notification: ASSISTANT_ACTIVATE from sender: MMM-Hotword
module.js:154 MMM-DarkSkyForecast received a module notification: ASSISTANT_ACTIVATE from sender: MMM-Hotword
module.js:154 mmm-systemtemperature received a module notification: ASSISTANT_ACTIVATE from sender: MMM-Hotword
newsfeed.js:340 newsfeed - received notification: ASSISTANT_ACTIVATE
newsfeed.js:391 newsfeed - unknown notification, ignoring: ASSISTANT_ACTIVATE
module.js:154 clock received a module notification: HOTWORD_SLEEPING from sender: MMM-Hotword
module.js:154 MMM-Traffic received a module notification: HOTWORD_SLEEPING from sender: MMM-Hotword
module.js:154 MMM-Hue received a module notification: HOTWORD_SLEEPING from sender: MMM-Hotword
module.js:154 MMM-DarkSkyForecast received a module notification: HOTWORD_SLEEPING from sender: MMM-Hotword
module.js:154 mmm-systemtemperature received a module notification: HOTWORD_SLEEPING from sender: MMM-Hotword
newsfeed.js:340 newsfeed - received notification: HOTWORD_SLEEPING
newsfeed.js:391 newsfeed - unknown notification, ignoring: HOTWORD_SLEEPING
module.js:205 clock is resumed.
module.js:205 MMM-AssistantMk2 is resumed.
module.js:205 MMM-Hotword is resumed.
module.js:205 MMM-Traffic is resumed.
module.js:205 MMM-Hue is resumed.
module.js:205 MMM-DarkSkyForecast is resumed.
module.js:205 MMM-PIR-Sensor is resumed.
module.js:205 mmm-systemtemperature is resumed.
module.js:205 newsfeed is resumed.

So it look like the suspended state create the blank screen. (am I right ? :/ )
If yes Now the question is , how to prevent the modules to be suspended.
Is that because of the PIR module ?

thanks

ejay-ibm

Searching for similar log in other thread I found someone saying :
“It might be due to “onIdle” and “onDetected” features. Disable them”
So I have added to my config.js in the MM assistant module

 onIdle: {
      timer: 0,  // if you don't want to use this feature, just set timer as `0` or command as ""
      command: "HIDEMODULES"
    },

I’m testing and will report results.
Thanks

ejay-ibm

Ok Great ! That was the issue !
Placing the timer to 0 prevent the module to be suspended .

Now I would like to put this back in the code so the modules in suspended mode that is great as indeed I don’t need them update when the screen is Off but i’d like to resume with the onDetected when motion is detected by the PIR module ?

Is it possible to Sync the Idle and onDetected with the PIR Module ?

Thanks .

ejay-ibm

Me again

I Would Say that you should mark the post as solved As We have root cause here.
I have created that git

https://github.com/paviro/MMM-PIR-Sensor/issues/73
To get some help from paviro and see if the ondetected function of MK2 assistant could be implemented in the PIR module so they could be kind of sync.

Thanks to @sdetweil for driving me in the right debug way for finding the root cause of the problem.

thedk

This post is deleted!

philmavedzenge

Hi @ejay-ibm did you manage to fix the issue. i have the same issue with the PIR Module. Sometimes the screen wakes up but its blank and i have to restart the pi.