Noob need help

[Mykle1]

@Muzziboy

This will help you with AutoStarting MM. Pay close attention to the instructions. At some point you will have to copy what is displayed in your terminal and paste it. You’ll know what I mean when you get to that step.

https://github.com/MichMich/MagicMirror/wiki/Auto-Starting-MagicMirror

Sorry, but I don’t have an idea about the dimming issue. I’ve never seen that one before.

[Muzziboy]

@Mykle1 thank you for your response. I;m stuck at the part where I need to type cd ~ nano mm.sh. My response is
bash: cd: too many arguments. Any Ideas?

[sdetweil]

@Muzziboy those are two commands to enter, not one

cd ~

And then

nano mm.sh

[Muzziboy]

@sdetweil thank you for pointing that out it autostarts now. Well twice so far. Thanks

[CyruS1337]

So I do not directly have the same problem with dimming. But with me it is so that with one mirror the writing is brighter and with the other mirror darker, although it concerns identical Montiore. Can you adjust the brightness in the general menu?

[retroflex]

One of my TV’s have some kind of automatic dimming based on the total brightness of what’s shown. Looks a bit like your video. So look in the settings/manual of the screen and see if you can find anything about this and if you can turn it off.

[Muzziboy]

@CyruS1337 I tried auto brightness previously. But after reading your response I went and turned everything auto off. Although I don’t know which feature was the problem it solved my dimming problem. Thank you.

[Muzziboy]

@retroflex I tried auto brightness previously. But after reading your response I went and turned everything auto off. Although I don’t know which feature was the problem it solved my dimming problem. Thank you.

[Muzziboy]

Just wanted say a quick thank you for the fast responses for my MM. Now time for customizing!

[retroflex]

@Muzziboy Great that it worked out! :)