I also built a gesture detection module using infrared sensors:
https://github.com/thobach/MMM-Gestures
It requires an Arduino and two infrared sensors for detecting presence and up, down, left, right, close and far hand gestures.
It can be used to turn the mirror into sleep mode when its not used, shows compliments when you stand in front of it and allows to scroll through the news ticker and view more news details incl. the full news article.

@mchrdk @binderth @lavolp3 I created a new module for Microsoft To Do at https://github.com/thobach/MMM-MicrosoftToDo. The migration from Wunderlist to Microsoft To Do was quite seamless.

Could you please test it and provide me some feedback? Thanks!

@AnduriI You may like https://github.com/thobach/MMM-OpenWeather24Hours which I built and migrated from Darksky to OpenWeather.

@ayotrav You might want to check out my https://github.com/thobach/MMM-Gestures module

@karsten13 What are your thoughts on adding npm install @electron/rebuild --unsafe-perm; \ as part of the container image creation process to https://gitlab.com/khassel/magicmirror/-/blob/master/build/Dockerfile-debian?

I’m the author of https://github.com/thobach/MMM-MicrosoftToDo in case that’s the module you’re referring to ;)

Hashtags are already color coded if you specify the “highlightTagColor” parameter (see https://github.com/thobach/MMM-MicrosoftToDo#installation).

Sorting is possible with the parameter “orderBy”, unfortunately the API does not allow to order by title, which means it would need to be manually implemented on-top if that is a priority for you.
I added though sorting by importance if you set the “orderBy” parameter to “importance”.

@Nneuland I assume you are now on Bullseye - see here https://forum.magicmirror.builders/topic/16865/mmm-remotecontrol-or-vcgencmd-issue and change the settings to use the fake KMS driver (fkms) instead of kms.

@diemen112 @karsten13 For bullseye I needed to change the display driver to the fake kms one (dtoverlay=vc4-fkms-v3d in /boot/config.txt) to have any effect of vcgencmd.
Afterwards vcgencmd only worked from the host, but not from @karsten13’s docker container. There I ran into the same problem with my MMM-Gestures module:

[09.10.2022 17:54.49.927] [LOG]   Sun Oct 09 2022 17:54:49 GMT+0200 (Central European Summer Time): exec error: Error: Command failed: vcgencmd display_power 0
vcgencmd: error while loading shared libraries: libvchiq_arm.so.0: cannot open shared object file: No such file or directory

I fixed it by mounting two more files from the host, my volume mounts now are:

    volumes:
      - ../mounts/config:/opt/magic_mirror/config
      - ../mounts/modules:/opt/magic_mirror/modules
      - ../mounts/css:/opt/magic_mirror/css
      - /tmp/.X11-unix:/tmp/.X11-unix
      - /opt/vc:/opt/vc/:ro
      - /usr/bin/vcgencmd:/usr/bin/vcgencmd
      - /usr/lib/arm-linux-gnueabihf/libvchiq_arm.so.0:/usr/lib/arm-linux-gnueabihf/libvchiq_arm.so.0
      - /usr/lib/arm-linux-gnueabihf/libvcos.so.0:/usr/lib/arm-linux-gnueabihf/libvcos.so.0
      - /var/run/dbus/system_bus_socket:/var/run/dbus/system_bus_socket

@clhe0423 You can find here an example how it is used in MMM-Gestures: https://github.com/thobach/MMM-Gestures/blob/master/MMM-Gestures.js#L110 & https://github.com/thobach/MMM-Gestures/blob/master/MMM-Gestures.js#L118

@acethefire On https://github.com/edward-shen/MMM-pages#notifications the usable events are described. I use them for example here: https://github.com/thobach/MMM-Gestures/blob/094ef30fe4a7e9204846a4f77d6314b61ee1d758/MMM-Gestures.js#L85

@Mighty-Mouseq Nice! Do you want to create a pull request? I could then merge it into the main branch for everyone.

If you are looking for some code to disable the monitor or if you want the use an infrared sensor to detect when someone is in front of the mirror and only then turn it on, you can check my module https://github.com/thobach/MMM-Gestures.