Work is not finished , but let me know what you are thinking about my information panel
The Buttons on the left side are Busch Jaeger Zigbee trigger to control the pages and actions on the screens
Work is not finished , but let me know what you are thinking about my information panel
The Buttons on the left side are Busch Jaeger Zigbee trigger to control the pages and actions on the screens
@Babene1
Hi , I try to explain a bit more.
Everything is in the wall . I used one Raspberry 4 and an housing with a quit fan on top .
On top of the wooden wall is the PIR mounted. Works fine if someone is going from our kitchen to the living room. Both monitors come back in 5 seconds . If I am about 3 meters away the wake up process starts. Perfect for me and my family.
The controlling of the screens is a quite „push the Button“ Action . I started to control everything with Alexa , but early in the morning or quite late in the evening I don’t like to talk to much … but in general it also works .
Back to the buttons . I use a conbee Zigbee stick in a second Raspi placed in our basement of the house. On this second Raspi the software ioBroker is installed . So if I push the Zigbee button it will send an trigger to the ioBroker via conbee. The ioBroker translates with an program script the Zigbee trigger into an MQTT trigger . This MQTT is uses with the MQTT Bridge in the MagicMirror to push notifications to the MagicMirror … yes quite difficult, but it works fine and the delay is not to big ( Max 0.5 sec.)
I also started to test with real wired buttons. The plan was to bore holes in the wood an place a few buttons , but I decided to do in regards of a cleaner view of the wood wall.
Here some more pictures
@sek_is_back
how can i update to the development branch ? sorry for this question, but i am not the coding
expert :-(
@nkb88
same on my side … no idea how to fix it
@maxxmagic said in MMM-PIR-Sensor:
The install is complete new with the newest raspian and the newest version of MM and so on.
Have you also switched on the GPIO’s in the RASPBIAN operating system?
i had the same problem and changed type: “wDataCurrent”, to type: “current”, because in the folder /home/pi/MagicMirror/modules/default/weather i found the files
current.njk
hourly.njk
forecast.njk
now is runs
@Babene1
Hi , I try to explain a bit more.
Everything is in the wall . I used one Raspberry 4 and an housing with a quit fan on top .
On top of the wooden wall is the PIR mounted. Works fine if someone is going from our kitchen to the living room. Both monitors come back in 5 seconds . If I am about 3 meters away the wake up process starts. Perfect for me and my family.
The controlling of the screens is a quite „push the Button“ Action . I started to control everything with Alexa , but early in the morning or quite late in the evening I don’t like to talk to much … but in general it also works .
Back to the buttons . I use a conbee Zigbee stick in a second Raspi placed in our basement of the house. On this second Raspi the software ioBroker is installed . So if I push the Zigbee button it will send an trigger to the ioBroker via conbee. The ioBroker translates with an program script the Zigbee trigger into an MQTT trigger . This MQTT is uses with the MQTT Bridge in the MagicMirror to push notifications to the MagicMirror … yes quite difficult, but it works fine and the delay is not to big ( Max 0.5 sec.)
I also started to test with real wired buttons. The plan was to bore holes in the wood an place a few buttons , but I decided to do in regards of a cleaner view of the wood wall.
Here some more pictures
Work is not finished , but let me know what you are thinking about my information panel
The Buttons on the left side are Busch Jaeger Zigbee trigger to control the pages and actions on the screens
Hi, i guess you have to change some code in the *.js file of mmm-openmapweather.
there is a row with //,“50n”: “wi-night-alt-cloudy-windy”
due to the point that there is no image for the “fog at night” i used the regular fog image.
now it works for me , yes it is not 100% correct, but better than nothing.
iconImageTable: {
"01d": "sunny.png",
"02d": "partlysunny.png",
"03d": "partlycloudy.png",
"04d": "cloudy.png",
"09d": "sleet.png",
"10d": "rain.png",
"11d": "tstorms.png",
"13d": "snow.png",
"50d": "fog.png",
"01n": "nt_clear.png",
"02n": "nt_cloudy.png",
"03n": "nt_mostlycloudy.png",
"04n": "cloudy.png",
"09n": "nt_sleet.png",
"10n": "nt_rain.png",
"11n": "nt_tstorms.png",
"13n": "nt_snow.png"
,"50n": "fog.png"
Hi audun ,
thank you for the hint (that´s what i am looking for )
,i tried to install but it is not running .
Just “loading” is displayed. Tried different config´s but no result. Is there a special thing to follow that it will run?
Hi linuxtuxie,
sorry fore my late response . I was a few days in Austria.
Nevertheless i tried today your proposal and it looks much better. Now i see that :
@linuxtuxie
Hello , i try to run the SunnyPortal module, but still no result. I´ve reinstalled the Pi severl times , down to a fresh image with no other modules, but i get only the loading view. thats all.
Any idea what i have to do ?
error message from PM2.log
Login Failed, no redirect to Dashboard or UserProfile/FixedPages/HoManEnergyRedesign.aspx