Hello everyone
https://github.com/deg0nz/MMM-EnergyMonitor
I’m having no luck with this module and was wondering if anyone else has had any? I understand this module calls data from MMM-Fronius2 module which I have working., Below is a picture and you can see the data from the Fronius2 module on the left is working but nothing on the EnergyMonitor module.
I’m not sure where to begin troubleshooting this I think the problem is in how the two modules communicate any ideas?
@sdetweil said in MMM-EnergyMonitor help:
@mayfield can you show the config if the two modules, and any messenger in the console output, or in the developers window console ctrl-shift-i on the keyboard, select the console tab and scroll up to see any messages in red
Here is a photo of the console screen.
@sdetweil said in error after 2.23 update:
@mayfield you didn’t finish the upgrade, 2 steps
git pull
npm installyou did not do step 2
Thanks Sam yes your right
Hi everyone
I just updated and now am getting this error when starting MM up not sure where to start on this one
@bhepler Where do you find the update? is this the right link? https://github.com/ronny3050/internet-monitor
Very nice job, I really like the look. Its hard to see from the photos how have you secured the monitor into the frame?
@sdetweil Hear are somefile.txt and my config.js
> magicmirror@2.21.0 start
> DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js
[09.10.2022 09:14.04.452] [LOG] Starting MagicMirror: v2.21.0
[09.10.2022 09:14.04.467] [LOG] Loading config ...
[09.10.2022 09:14.04.483] [LOG] Loading module helpers ...
[09.10.2022 09:14.04.487] [LOG] No helper found for module: alert.
[09.10.2022 09:14.04.523] [LOG] Initializing new module helper ...
[09.10.2022 09:14.04.526] [LOG] Module helper loaded: updatenotification
[09.10.2022 09:14.04.529] [LOG] No helper found for module: clock.
[09.10.2022 09:14.04.968] [LOG] Initializing new module helper ...
[09.10.2022 09:14.04.977] [LOG] Module helper loaded: calendar
[09.10.2022 09:14.05.125] [LOG] Initializing new module helper ...
[09.10.2022 09:14.05.149] [LOG] Module helper loaded: MMM-Fronius2
[09.10.2022 09:14.05.153] [LOG] No helper found for module: MMM-EnergyMonitor.
[09.10.2022 09:14.05.156] [LOG] No helper found for module: weather.
[09.10.2022 09:14.05.212] [LOG] Initializing new module helper ...
[09.10.2022 09:14.05.213] [LOG] Module helper loaded: newsfeed
[09.10.2022 09:14.05.215] [LOG] All module helpers loaded.
[09.10.2022 09:14.05.439] [LOG] Starting server on port 8080 ...
[09.10.2022 09:14.05.470] [LOG] Server started ...
[09.10.2022 09:14.05.472] [LOG] Connecting socket for: updatenotification
[09.10.2022 09:14.05.474] [LOG] Starting module helper: updatenotification
[09.10.2022 09:14.05.475] [LOG] Connecting socket for: calendar
[09.10.2022 09:14.05.477] [LOG] Starting node helper for: calendar
[09.10.2022 09:14.05.483] [LOG] Connecting socket for: MMM-Fronius2
[09.10.2022 09:14.05.484] [LOG] Starting module helper: MMM-Fronius2
[09.10.2022 09:14.05.486] [LOG] Connecting socket for: newsfeed
[09.10.2022 09:14.05.488] [LOG] Starting node helper for: newsfeed
[09.10.2022 09:14.05.489] [LOG] Sockets connected & modules started ...
[09.10.2022 09:14.05.950] [LOG] Launching application.
[09.10.2022 09:14.11.582] [LOG] Create new calendarfetcher for url: https://www.vic.gov.au/sites/default/files/2019-02/Victorian-school-term-dates.ics - Interval: 300000
[09.10.2022 09:14.11.670] [LOG] Create new calendarfetcher for url: https://www.vic.gov.au/sites/default/files/2021-09/Victorian-public-holiday-dates.ics - Interval: 300000
[09.10.2022 09:14.11.687] [LOG] Create new newsfetcher for url: https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml - Interval: 300000
[09.10.2022 09:14.11.696] [INFO] Checking git for module: MMM-Fronius2
[09.10.2022 09:14.11.745] [INFO] Checking git for module: MMM-EnergyMonitor
[09.10.2022 09:14.11.796] [INFO] Checking git for module: default
[09.10.2022 09:14.12.782] [INFO] Calendar-Fetcher: Broadcasting 14 events.
[09.10.2022 09:14.14.376] [INFO] Newsfeed-Fetcher: Broadcasting 34 items.
/* MagicMirror² Config Sample
*
* By Michael Teeuw https://michaelteeuw.nl
* MIT Licensed.
*
* For more information on how you can configure this file
* see https://docs.magicmirror.builders/configuration/introduction.html
* and https://docs.magicmirror.builders/modules/configuration.html
*/
let config = {
address: "localhost", // Address to listen on, can be:
// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
// - another specific IPv4/6 to listen on a specific interface
// - "0.0.0.0", "::" to listen on any interface
// Default, when address config is left out or empty, is "localhost"
port: 8080,
basePath: "/", // The URL path where MagicMirror² is hosted. If you are using a Reverse proxy
// you must set the sub path here. basePath must end with a /
ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
// or add a specific IPv4 of 192.168.1.5 :
// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],
useHttps: false, // Support HTTPS or not, default "false" will use HTTP
httpsPrivateKey: "", // HTTPS private key path, only require when useHttps is true
httpsCertificate: "", // HTTPS Certificate path, only require when useHttps is true
language: "en",
locale: "en-AU",
logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
timeFormat: 24,
units: "metric",
// serverOnly: true/false/"local" ,
// local for armv6l processors, default
// starts serveronly and then starts chrome browser
// false, default for all NON-armv6l devices
// true, force serveronly mode, because you want to.. no UI on this device
modules: [
{
module: "alert",
},
{
module: "updatenotification",
position: "top_bar"
},
{
module: "clock",
position: "top_left"
},
{
module: "calendar",
header: "Holidays",
position: "top_left",
config: {
calendars: [
{
symbol: "calendar-check",
maximumEntries: '4',
//url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"
url: "https://www.vic.gov.au/sites/default/files/2019-02/Victorian-school-term-dates.ics"
},
{
symbol: "birthday-cake",
maximumEntries: "10",
url: "https://www.vic.gov.au/sites/default/files/2021-09/Victorian-public-holiday-dates.ics",
}
]
}
},
{
module: 'MMM-Fronius2',
position: "top_left",
header: "Solar Panels",
hidden: false,
ip: "192.168.2.146",
updateInterval: 3000,
wattConversionOptions: {
enabled: true,
threshold: 1200,
numDecimalDigits: 2,
},
offlineDetectionOptions: {
numRequests: 5, // Converter is considered offline after this num of failed requests
offlineInterval: 1800000, // 30 Minutes
},
requestTimeout: 1000,
broadcastSolarPower: true,
broadcastGridPower: true,
broadcastBatteryPower: true,
dummyData: false,
},
{
module: 'MMM-EnergyMonitor',
disabled: false,
position: 'middle_center',
hidden: false,
updateInterval: 3000,
energyStorage: false,
width: "100px",
height: "100px",
lineWidth: "8px",
resetCycles: 3,
logNotifications: false,
wattConversionOptions: {
enabled: true,
threshold: 1200,
numDecimalDigits: 2,
},
iconCssClasses: {
home: "fas fa-home",
grid: "fas fa-plug",
energyStorage: "fas fa-battery-half",
localPowerSource: "fas fa-solar-panel",
}
},
{
module: "compliments",
disabled: true,
position: "lower_third"
},
{
module: "weather",
position: "top_right",
config: {
weatherProvider: "openweathermap",
type: "current",
location: "Fawkner, AU",
locationID: "2166819", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
apiKey: "7e845e5fc36ce2a73900ec4152ca884c"
}
},
{
module: "weather",
position: "top_right",
header: "Weather Forecast",
config: {
weatherProvider: "openweathermap",
type: "forecast",
location: "Fawkner, AU",
locationID: "2166819", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
apiKey: "7e845e5fc36ce2a73900ec4152ca884c"
}
},
{
module: "newsfeed",
position: "bottom_bar",
config: {
feeds: [
{
title: "New York Times",
url: "https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml"
}
],
showSourceTitle: true,
showPublishDate: true,
broadcastNewsFeeds: true,
broadcastNewsUpdates: true
}
},
]
};
/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}
@sdetweil Do I run npm start pm2 logs --lines=50?
@sdetweil said in MMM-EnergyMonitor help:
@mayfield can you show the config if the two modules, and any messenger in the console output, or in the developers window console ctrl-shift-i on the keyboard, select the console tab and scroll up to see any messages in red
Here is a photo of the console screen.
Hello everyone
https://github.com/deg0nz/MMM-EnergyMonitor
I’m having no luck with this module and was wondering if anyone else has had any? I understand this module calls data from MMM-Fronius2 module which I have working., Below is a picture and you can see the data from the Fronius2 module on the left is working but nothing on the EnergyMonitor module.
I’m not sure where to begin troubleshooting this I think the problem is in how the two modules communicate any ideas?
Hello everyone
I’ve noticed these errors as MM starts up, can anyone shed some light on what these are and should I be concerned.
@mayfield The reason I’m asking about logs is I’m having a problem were some modules that were working are not working and also the mirror is going blank after a short time.
I’m not sure how to troubleshoot the modules and in regards to the screen going blank, I have checked the the raspberry pi blanking is disabled and there appears to be no screen saver on the pi so ism not sure where to look next.