Super thank you so much.
I ve got weather on my magic mirror :-)

Hello,
Here are some pictures of my magic mirror that I installed in my laundry.
I especially thank Mykle 1 and everyone in the forum for their help.
I made the wooden frame myself. I ordered the mirror in the US. Very difficult to find in France.
I would like to upgrade my mirror by installing the present module (if you could advise me).
Thank you also for your new ideas.

Hello,

I had not downloaded the right version of Rasbian. If you want this to work, you need the RASPBIAN version JESSIE WITH DESKTOP

Thanks you so much everybody

Hello
I just finished my second mirror. I recovered an old piece of furniture that was broken. I took it all away and repaired it. As you can see: there is a white mark on the right side. I dropped during the installation.

I bought the showcase in China. It is very difficult in Europe to find a glasse.
I will soon post an RSS feed, the weather in color.
Thank you all for this great forum.









   

Thank you so much Mukle1.
it’s ok now.

Thanks you Mykle 1 !!!

Hello,
I am looking for the name of the weather module which gives the current temperature, the felt temperature and the weather for the days to come. If you could advise me? I am using the app’s API: openweathermap.
Thank you for your help.

Hello,
Did you download the version:
RASPBIAN STRETCH WITH DESKTOP ?
I advise you to see this too: https://forum.magicmirror.builders/topic/4596/help-to-install-magicmirror
Good luck

Hello,
I am looking for the name of the weather module which gives the current temperature, the felt temperature and the weather for the days to come. If you could advise me? I am using the app’s API: openweathermap.
Thank you for your help.

Thanks it’s ok now.

Ok thanks it 's good now.

@sdetweil said in Acces IP Whitelist:

@greda what is address set to? must be “0.0.0.0” to allow access from off the mirror machine.
localhost means ONLY listen for inside connections…
ipWhitelist applies AFTER that

How do I configure the ipWhitelist line?
Currently: ipWhitelist: [“127.0.0.1”, “:: ffff: 127.0.0.1”, “:: 1”],

@sdetweil said in ipWhitelist HowTo:

u mean inside your home?

Yes inside my home.

Hi,
I have a little problem. I configured config.js like this: ipWhitelist: [“127.0.0.1”, “:: ffff: 127.0.0.1”, “:: 1”, “192.168.0.0/24”, ":: ffff: 192.168. 0.0 / 24 "], // Set [] to allow all IP addresses
But I can’t access the mirror from a browser. My internal ip is 192.168.0.0/24
Thank you for your help.

Hi everybody,

I want to connect from the outside on my maggic. I configured the config.js file like this: ipWhitelist: [“127.0.0.1”, “:: ffff: 127.0.0.1”, “:: 1”, “0.0.0.0”], // Set [] to allow all IP addresses but I don’t have remote access.
Thank you for your help.

Hello,
I install my magicMirror again and 1st problem when I want to install the software: bash -c “$(curl -sL https://raw.githubusercontent.com/MichMich/MagicMirror/master/installers/raspberry.sh)”
I have the following message: bash: 404: : command not found
Thanks for youe help

Bonjour,
Rare de trouver un Français ici :)
Tu as utilisé quel type de verre pour ton miroir ?
Je souhaite un faire un nouveau pour ma salle de bain.
Je te remercie d’avance.

@mmourcia Oups excuse moi. Merci superbe miroir :clapping_hands_medium-dark_skin_tone: