@Mykle1 thanks :/

@Mykle1
yeap, i did it. I can record successful. Even i changed USB mic to default.

@Mykle1 Ok, i bought an USB microphone. Did it default, but still module isn’t working with mic. I can record a sound and listen it.

@Mykle1 Its Microsoft Lifecam VX-3000

Hello,

I tried to use that module with USB webcam’s mic but didnt work. Should i do something to use webcams mic?

@cowboysdude but i had an error like this when install rpi-dht-sensor

pi@ozdemir:~ $ sudo apt-get install rpi-dht-sensor
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package rpi-dht-sensor
pi@ozdemir:~ $ 

@cowboysdude nope. Installed again. Its like this:

pi@ozdemir:~ $ cd ~/MagicMirror/modules/
pi@ozdemir:~/MagicMirror/modules $ git clone https://github.com/prasanthsasikumar/MMM-Temperature-Humidity.git
Cloning into 'MMM-Temperature-Humidity'...
remote: Counting objects: 11, done.
remote: Total 11 (delta 0), reused 0 (delta 0), pack-reused 11
Unpacking objects: 100% (11/11), done.
Checking connectivity... done.
pi@ozdemir:~/MagicMirror/modules $ cd ~/MagicMirror/modules/MMM-Temperature-Humidity/
pi@ozdemir:~/MagicMirror/modules/MMM-Temperature-Humidity $ npm install

> rpi-dht-sensor@0.1.1 install /home/pi/MagicMirror/modules/MMM-Temperature-Humidity/node_modules/rpi-dht-sensor
> node-gyp rebuild

make: Entering directory '/home/pi/MagicMirror/modules/MMM-Temperature-Humidity/node_modules/rpi-dht-sensor/build'
  CC(target) Release/obj.target/node_dht_sensor/src/bcm2835.o
  CXX(target) Release/obj.target/node_dht_sensor/src/node-dht-sensor.o
  SOLINK_MODULE(target) Release/obj.target/node_dht_sensor.node
  COPY Release/node_dht_sensor.node
make: Leaving directory '/home/pi/MagicMirror/modules/MMM-Temperature-Humidity/node_modules/rpi-dht-sensor/build'
mmm-temperature-humidity@0.1.0 /home/pi/MagicMirror/modules/MMM-Temperature-Humidity
└─┬ rpi-dht-sensor@0.1.1 
  ├── bindings@1.2.1 
  └── nan@2.6.2 

pi@ozdemir:~/MagicMirror/modules/MMM-Temperature-Humidity $

Already did it. Doesnt work.

Hello,

I installed MMM-Temperature-Humidity, installed all directions, and run magic mirror but had an error in terminal like this:

WARNING! Could not load config file. Starting with default configuration. Error found: Error: The module ‘/home/pi/MagicMirror/modules/MMM-Temperature-Humidity/node_modules/rpi-dht-sensor/build/Release/node_dht_sensor.node’
was compiled against a different Node.js version using
NODE_MODULE_VERSION 51. This version of Node.js requires
NODE_MODULE_VERSION 53. Please try re-compiling or re-installing
the module (for instance, using npm rebuild ornpm install).

node version: 7.10.0
npm version 4.2.0 (tried in 4.5.0 too)

How can i solve it? :/

@Damian yes i did black but its an alert turning: “No signal”. How can i deactive that alert :disappointed_relieved: