I checked your region (32) and there is indeed no data from DWD. The only region is 31 with data.

Apparently DWD had changed its numbering. I updated the Readme.

Those are the new regions:
10=Schleswig-Holstein und Hamburg
11=Inseln und Marschen
12=Geest,Schleswig-Holstein und Hamburg
20=Mecklenburg-Vorpommern
30=Niedersachsen und Bremen
31=Westl. Niedersachsen/Bremen
32=Östl. Niedersachsen
40=Nordrhein-Westfalen
41=Rhein.-Westfäl. Tiefland
42=Ostwestfalen
43=Mittelgebirge NRW
50=Brandenburg und Berlin
60=Sachsen-Anhalt
61=Tiefland Sachsen-Anhalt
62=Harz
70=Thüringen
71=Tiefland Thüringen
72=Mittelgebirge Thüringen
80=Sachsen
81=Tiefland Sachsen
82=Mittelgebirge Sachsen
90=Hessen
91=Nordhessen und hess. Mittelgebirge
92=Rhein-Main
100=Rheinland-Pfalz und Saarland
101=Rhein, Pfalz, Nahe und Mosel
102=Mittelgebirgsbereich Rheinland-Pfalz
103=Saarland
110=Baden-Württemberg
111=Oberrhein und unteres Neckartal
112=Hohenlohe/mittlerer Neckar/Oberschwaben
113=Mittelgebirge Baden-Württemberg
120=Bayern
121=Allgäu/Oberbayern/Bay. Wald
122=Donauniederungen
123=Bayern nördl. der Donau, o. Bayr. Wald, o. Mainfranken
124=Mainfranken

There is now a new version available for MMM-Homematic that also works w/o changing the config.

The same problem appears to happen with MMM-Homematic. Getting same errors after update to 2.18.0

Access to XMLHttpRequest at 'http://192.168.178.xx/addons/xmlapi/state.cgi?datapoint_id=1824' from origin 'http://0.0.0.0:8080' has been blocked by CORS policy: The request client is not a secure context and the resource is in more-private address space private.

@majorc Thanks. Somehow this does not really work on mine. Now the text is stretching into the right border.
But good that it works for you.

@sdetweil for MMM-DWD-Pollen you can change the following classes in CSS:

tab-center
pollen-low
pollen-low-medium
pollen-medium
pollen-mediumhigh
pollen-high
pollen-nodata

and just make

text-align: right

That should do the trick. Float will not work - it pushes everything to the right w/o spacing.

I am still thinking how one can save the space on the right side but I am not an CSS / HTML expert.

Added the option to select which Pollen to display through config.

@TechJak7000 said in MMM-DWD-Pollen:

Astma-Allergi Denmark

I found some information here: https://github.com/rugaard/pollen
Thus it looks like Astma-Allergi Denmark does not offer any official API. Thus you have to use this API here (which I guess takes the data from the website) and renders the data accordingly. There are only two regions as far as I can see (East and West?) and 25 pollen. If the API works it should no big problem.

@duxnobis In general yes, I think Switzerland gets data from Meteo Schweiz (https://opendata.swiss/de/dataset/messstationen-des-nationalen-pollenmessnetzes)

@Sachse Glad you got it working with the support from @bhelper. Sorry that I could not reply fast enough. Thanks for using!

New version available with icons as alternative display

https://github.com/carstendirks/MMM-DWD-Pollen

@thedoorsfanatic
Hi,

thanks for the hint. I am parsing for the partregion_id which in case of of Bayern has 4 sub regions 121-124:
121 Allgäu/Oberbayern
122 Donauniederungen
123 Bayern n. der Donau, o. Bayr. Wald, o. Mainfranken
124 Mainfranken

There is a map showing the regions (even though the numbers are wrong): https://www.dwd.de/DE/leistungen/gefahrenindizespollen/Gebiete.html?nn=16102&lsbId=463856

But good idea with the “no data” warning.

Thanks (btw, I mad a bug fix yesterday that prevented some of the items showing up)

https://github.com/carstendirks/MMM-DWD-Pollen/blob/master/screenshot.png

Description
Since the existing module to display Pollen information from Germany seems to be broken, I wrote a new module but used the US version as a template (MMM-Pollen).

The data is sourced from DWD.

Screenshot

Link:
MMM-DWD-Pollen

Same problem after upgrading to 2.7.1 both calendars do not show any data anymore. Even disabling them does not bring up the default calendar.

Thank you for the module. It runs very well but I tried to fix a certain position thus in case of restart it still shows the same view of earth (like Europe in the middle). I saw that you use https://earth.nullschool.net/#current/wind/surface/level/orthographic=-101.59,35.46,441 and thought by modifying the numbers it would change the view but somehow it always starts with a kind of default view. Using https://earth.nullschool.net/#current/wind/surface/level/orthographic=0.04,35.19,441 works in a normal browser but it does not work on MagicMirror.
Any guidance?

Thank you for the fast answer. That makes sense since I did not change anything. I will play around a bit with the sensitivity and wait for Google API updates.

BTW: Great modules!

I am using MMM-Hotword together with MMM-AssistantMk2 and MMM-NotificationTrigger.

So far this works great but since some days I have the situation that after correctly recognizing the keyword the microphone stays open which leads to the situation that any following communication is also recognized by Google Assistant as input.

Sometimes it even creates the situation that an answer spoken by Google Assistant is again recognized by Google Assistant as input - somehow as it would speak with itself.

This is my config:

{
      module: "MMM-NotificationTrigger",
      config: {
        triggers:[
          {
            trigger: "HOTWORD_DETECTED",
            fires: [
              {
                fire:"HOTWORD_PAUSE",

              },
              {
                fire:"ASSISTANT_ACTIVATE",
		delay: 200,
                payload: function(payload) {
                  return {
                    "profile": payload.hotword
                  }
                }
              },
            ]
          },
          {
            trigger: "ASSISTANT_DEACTIVATED",
            fires: [
              {
                fire:"HOTWORD_RESUME"
              }
            ]
          },
        ]
      }
},

{
  module: 'MMM-Hotword',
  config: {
    snowboy: [
	{
		//hotwords: "smartmirror", //this will be sent to other module for distinguishing which hotword is detected.
		hotwords: "okhorst",		
		file: "resources/models/OKHorst.pmdl",
		sensitivity: '0.7',
	},
	{
		hotwords: "snowboy",
		file: "resources/models/snowboy.umdl",
		sensitivity: '0.5',
	},
	{
		file: 'resources/models/jarvis.umdl',
		sensitivity: '0.8,0.80',
		hotwords: ['jarvis','jarvis'] //Kitt.ai changed their Jarvis UMDL, it has 2 models in one file. So weird.
		//anyway, you can give different name for each. ['jarvis_1', 'jarvis_2']. Even though I think this is useless.
	}
    ],
    record: {
      sampleRate    : 16000,      // audio sample rate
      threshold     : 0.5,        // silence threshold (rec only)
      thresholdStart: null,       // silence threshold to start recording, overrides threshold (rec only)
      thresholdEnd  : null,       // silence threshold to end recording, overrides threshold (rec only)
      silence       : 1.0,        // seconds of silence before ending
      verbose       : true,      // log info to the console
      recordProgram : 'arecord',  // Defaults to 'arecord' - also supports 'rec' and 'sox'
      device        : null        // recording device (e.g.: 'plughw:1')
    },
    autostart: true,              // if 'false', this module will wait for 'HOTWORD_RESUME' notification to start hotwords detection at the beginning.
    autorestart: false,          // You can set this 'true' when you want this module to go back to listening mode automatically again after hotword is detected. But use this carefully when your other modules are using microphone or speaker.
  }
},


{
      module: "MMM-AssistantMk2",
      position: "bottom_right",
      config: {
		deviceLocation: { // (OPTIONAL)
			coordinates: { // set the latitude and longitude of the device (rf. mygeoposition.com)
				latitude: 50.243430, 
				longitude: 8.652580, 
			},
		},
		defaultProfile: "default", // This default profile should be in `profiles` field.
		profiles: 	{
				"default" : 	{
					profileFile: "default.json", //this path will be `~/MagicMirror/modules/MMM-AssistantMk2/profiles/default.json"
					lang: "de-DE",
					},
				},


		},
},

Disabling the notification module did not change the problem. I solved it finally by going through (1) removing and (2) reinstalling screensaver and then (3) disabling screensaver again. Even though for me there is no logical explanation doing it that way, the problem has gone away.

Running 2.4.1 and getting the black screen after some time. Pi is still accessible and PM2 restart mm makes it work again.
How do you disable the update notification module?