Hi OberfragGer
Yes i know, but now it is set and good ;-)
In a couple of month i renovate my apartment including the kitchen, entrance hall and living room,
so i want to hide the wire. Maybe i set a new powerwallplug behind or above the cabinet.
But for me it is ok. Thank you for your hints.
Greetings Torsten
Hi
i have installing MMM-Pages to, and i do the changing with MMM-page-indicator.
MMM-Carousel is also a good choice to change the pages manual.
Greetings Torsten
Hi,
Ok today we finish the woodwork and assemple all things together.
Everything work great!
Greetings Torsten
Hi,
uhhh yes… sorry, how stupid from me…
I switch the display an and off with the WIFI-Powerplug.
There a many ways to fullfill somebodys needs. For me the Wifi-Plug and the small script was ein easy way to deploy that. The goal was to switch the Display complete powerless to save energie.
Not only switch the display to dark or switch of the HDMI-Port.
It works very good and im happy with that solution.
Greetings Torsten
Hi,
it is possible to hide the Mousecursor when the MMM-Carousel is installed?
i changed from MMM-Pages + Page Indicator to MMM-Carousel because its faster and works a little bit better for me. But after the change there is a littel hand as a mousecursor? I want to hide oder remove this. The courser is only displayed when i use the Pageinationbuttons or the Slidebuttons from the MMM-Carousel modul?
Greetings Torsten
Hi
is it possible to make the bottom_bar three-piece ?
I need 3 regions instead of one. Each region can have the width of33%, and must be adress like:
bottom_bar_left
bottom_bar_center
bottom_bar_right
in the config.js, so i can assign modules to this position.
Which files i have to change? Can someone give me a hint or a How_to to do this?
Greetings Torsten
Hi
Today my WIFI-Powerplugs are arrive.
I used Tasmota because it don’t send things “Home” and you need no cloud and the Plugs switch very fast.
The Script i wrote to Switch the when im not in the WiFi Powerplugs:
#!/bin/bash
ping -c1 IP_OF_THE_MOBILE > /dev/null
if [ $? -eq 0 ]
then
wget -O /dev/null http://IP_OF_THE_POWERLPLUG/cm?cmnd=Power1%20On
exit 0
else
wget -O /dev/null http://IP_OF_THE_POWERLPLUG/cm?cmnd=Power1%20Off
fi
i installed a cronjob for every minute that execute the script, and it works very well.
Greetings Torsten
Hi,
hmm yes, maybe there are some litte problems with the MMM-Globe module.
In my case I have the Pi4 4GB Model, runs stable, but somehow with the time the swap-space going more full and fuller and when its reached the limit (in my case 512mb) the Pi will go very slow.
After a reboot everything goes allright and workes well…
With the rest of the memory, i have no trouble:
Free Ram = 25-30%, without the module round 44%
Maybe it is better to run in production the 8Gb Model?
My temperature is around 50-54° C with the fanless case.
Without the globe modul around 48°C
I change the name from “Network” to “WLAN- Gastzugang”.
Greetings Torsten
Hi,
looks cool!
Do you use a beamer for that or a Display?
Greetings Torsten
Hi
today im done with preparatory work with the wires:
i install the follwing things:
USB, HDMI and Powercord for the Display:
https://www.amazon.de/gp/product/B07HY21RMG/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
https://www.amazon.de/gp/product/B072J9FLN4/ref=ppx_od_dt_b_asin_title_s01?ie=UTF8&psc=1
https://www.amazon.de/gp/product/B075LK68G4/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1
All together wraped in:
https://www.amazon.de/gp/product/B07FW5H57B/ref=ppx_od_dt_b_asin_title_s01?ie=UTF8&psc=1
For the power connection from the Pi to the powerstrip:
https://www.amazon.de/gp/product/B07C4SZ6XN/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
https://www.amazon.de/gp/product/B07WFM84X9/ref=ppx_od_dt_b_asin_title_s01?ie=UTF8&psc=1
the Pi is direct plug into the USB-Ports of the Powerstrip, so i dont need a another power adapter for the Pi. The Poweradapter in the Picture is to power up the Display.
I need another adapter for the PowerConnection for the display.
The L connector does not fit well at his angle, so I order one that is more straight.
Greetings Torsten