Hi kusselin,
use this ready skript from Proxmox VE Helper Scripts - it works like a charme.

"To create a new MagicMirror Server LXC, run the command below in the Proxmox VE Shell.
To Update MagicMirror, run the command below (or type update) in the LXC Console.

bash -c “$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/magicmirror.sh)”

⚡ Default Settings: 512MiB RAM - 3GB Storage - 1vCPU ⚡

MagicMirror Interface: IP:8080

⚙️ Configuration

It’s from this url: https://tteck.github.io/Proxmox/

Hi, you can operate the Shellys with MQTT. There is for the MagicMirror a Modul called MMM-MQTT (https://github.com/ottopaulsen/MMM-MQTT). I use this for my Shelly Plug S - works fine.
Greetings Michael

Hi jackyjoy123,
have a look to Xiaomi temperature and humidity-sensors (https://xiaomi-mi.com/sockets-and-sensors/xiaomi-mi-temperature-humidity-sensor/). There is a MMM-module (https://github.com/mirko3000/MMM-xiaomi). Works fine.
Regards Michael

Your monitor should handle the cec-signal (Consumer Electronics Control).
I use very successfull the following crontrab

Stopp und reboot at 8 am

59 7 * * 1-5 sudo pm2 stop all >/dev/null 2>&1
0 8 * * 1-5 sudo reboot now >/dev/null 2>&1

29 9 * * 0,6 sudo pm2 stop all >/dev/null 2>&1
30 9 * * 0,6 sudo reboot now >/dev/null 2>&1

Anschalten des Monitors Wochentags um 8 Uhr

turn on monitor weekdays at 8 am

0 8 * * 1-5 echo “on 0” | cec-client -s -d 1 >/dev/null 2>&1

Anschalten des Monitors am Wochenende um 9.30 Uhr

#turn on monitor on weekend at 9.30 am
30 9 * * 0,6 echo “on 0” | cec-client -s -d 1 >/dev/null 2>&1

Ausschalten des Monitors täglich um 20.30 Uhr

#turn off monitor daily at 8.30 pm
30 20 * * * echo ‘standby 0’ | cec-client -s -d 1 >/dev/null 2>&1

best regards Michael

I use via crontab the CEC-function of the Monitor:

turn on monitor weekdays 8 o clock:

0 8 * * 1-5 echo “on 0” | cec-client -s -d 1 >/dev/null 2>&1

turn on monitor on saturday & sunday 9.30 o clock:

30 9 * * 0,6 echo “on 0” | cec-client -s -d 1 >/dev/null 2>&1

turn off monitor daily at 20.30 o clock

30 20 * * * echo ‘standby 0’ | cec-client -s -d 1 >/dev/null 2>&1

this works like a charme since over one year
regards Mike

@CyruS1337 said in Cronjob:

Thanks for the link, but it still does not work :(

# Edit this file to introduce tasks to be run by cron.
#
# Each task to run has to be defined through a single line
# indicating with different fields when the task will be run
# and what command to run for the task
#
# To define the time you can provide concrete values for
# minute (m), hour (h), day of month (dom), month (mon),
# and day of week (dow) or use '*' in these fields (for 'any').#
# Notice that tasks will be started based on the cron's system
# daemon's notion of time and timezones.
#
# Output of the crontab jobs (including errors) is sent through
# email to the user the crontab file belongs to (unless redirected).
#
# For example, you can run a backup of all your user accounts
# at 5 a.m every week with:
# 0 5 * * 1 tar -zcf /var/backups/home.tgz /home/
#
# For more information see the manual pages of crontab(5) and cron(8)
#
# m h  dom mon dow   command
#
#MONTAG BIS SONNTAG UM 19:55 MAGICMIRROR RESTART
55 19 * * * pm2 restart mm.sh >/dev/null 2>&1
#
#SAMSTAG REBOOT UM 12:00 MAGICMIRROR REBOOT
24 17 * * * sudo reboot
#

Sounds strange. Maybe you first have to stop the pm2 process before restart, with pm2 stop mm.sh. Don’t forget to complete the line für den reboot am Samstag - sudo reboot >/dev/null 2>&1
regards Michael

@CyruS1337 said in Cronjob:

Good evening

I’d like to see my MagicMirror restart at a certain time each day. What should I enter in the crontrab? I have already tried x variants, but unfortunately it never worked.

27 17 * * * Command pm2 restart mm

The sudo reboot command works fine.

27 17 * * 5 sudo poweroff

Did you forget to write the full command? Try pm2 restart mm.sh
By the way: I prefere the online crontab generator (https://crontab-generator.org/). It’s very easy.
Regards Mike

@lovesicker OK. Did you try to start the module twice? Maybe this is the possibility to activate both gateways at the same time as you need it.
Regards Mike

@lovesicker Hi,
why do you use two gateways? It’s not necessary. I use one gateway for my complete house. I use 10 temperature and humity sensors. Have a closer look to my config.
Regards Mike.

@lovesicker Hi,
I think you are on the wrong way: You use gatewayIP and gatewayToken twice. Thats not necessary.
Look to my configuration - this works fine:
{
module: ‘MMM-xiaomi’,
position: ‘bottom_left’,
colored: true,
header: ‘Temperatur / Luftfeuchtigkeit’, // This is optional
config: {
gatewayIP: ‘192.168.160.xx’,
outsideSensorId: ‘15xxx0201dxxx’,
gatewayToken: ‘cd857eee1fc760d029767709cd50xxxx’,
showWindow: true,
showVentilation: true,
showLights: false,
showTend: false,
showNotifications: false,
audioNotifications: false,

                    rooms:  [
		{
		name: 'Büro',
		minTemperature : 15,
                    maxTemperature : 35,
                    sortOrder: 1,
		devices : ['158d0001c2cxxx']
		},
		{
		name: 'Aussentemperatur  ',
		sortOrder: 20,
                    devices : ['15xxx00201d4xxx']    
                    },                  
                    {
                    name: 'Wohnzimmer  ',
                    minTemperature : 15,
                    maxTemperature : 35,
                    sortOrder: 2,
                    devices : ['158d0001c2cxxx']
		},
		{
                    name: 'Schlafzimmer  ',
                    sortOrder: 3,
                    minTemperature : 15,
                    maxTemperature : 30,
                    devices : ['1xxx000201dxxx', '15xxx001f49xxx']
                    },
                    {
                    name: 'Philipp',
                    minTemperature : 15,
                    maxTemperature : 35,
                    sortOrder: 4,
                    devices : ['1xxd0001c14xxx']
                    },
                    {
		name: 'Marco',
                    minTemperature : 15,
                    maxTemperature : 35, 
                    sortOrder: 5,
		devices : ['15xxx01f54xxx']
                    }, 
                      {
		name: 'HW-Raum',
                    minTemperature : 10,
                    maxTemperature : 35, 
                    sortOrder: 7,
		devices : ['15xxx002029xxx']
                    }, 		
					{
                    name: 'Garage',
                    minTemperature : 15,
                    maxTemperature : 35,
                    sortOrder: 10,
                    devices : ['15xxx001c1xxx']
                    },
                    {
                    name: 'Keller',
                    minTemperature : 15,
                    maxTemperature : 35,
                    sortOrder: 9,
                    devices : ['15xxx001c2axxx']
                    },
                    {
                    name: 'WC',
                    minTemperature : 15,
                    maxTemperature : 35,
                    sortOrder: 8,
                    devices : ['15xxx001c1axxx']
                    },
                    {
                    name: 'Bad',
                    minTemperature : 18,
                    maxTemperature : 35,
                    sortOrder: 6,
                    devices : ['15xxx001c2cxxx']
                    },  

]