Posts made by lolobyte

lolobyte

@Cato
Thank you for your answer.

I just tried MotionEyeOS before i went to Motion.
In my eyes it wasn’t configurable with my desired functionality.

I just hoped there is a possibility to implement foreign streams.

lolobyte

@ZachW

Pls. show your config.

lolobyte

Hi @Goldjunge_Chriz , thank you for waiting with my last order.

Please order for me the 3-rd mirror with 400x1000mm = 0,40m²

lolobyte

@Goldjunge_Chriz
Hey guys.

To members listed here. I deliver the pickup location information for your mirrors in Heilbronn after @Goldjunge_Chriz send a confirmation of the transferred amount.

lolobyte

@Cato

Hi, that’s the info of help.
Downloaded from
https://www.dropbox.com/s/xdfcxm5hu71s97d/motion-mmal.tar.gz

pi@raspi3-MM2:~ $ motion -h
motion Version mmaltest, Copyright 2000-2005 Jeroen Vreeken/Folkert van Heusden/Kenneth Lavrsen

usage: motion [options]

Possible options:

-n Run in non-daemon mode.
-s Run in setup mode.
-c config Full path and filename of config file.
-d level Log level (1-9) (EMR, ALR, CRT, ERR, WRN, NTC, ERR, DBG, ALL). default: 6 / NTC.
-k type Type of log (COR, STR, ENC, NET, DBL, EVT, TRK, VID, ALL). default: ALL.
-p process_id_file Full path and filename of process id file (pid file).
-l log file Full path and filename of log file.
-m Disable motion detection at startup.
-h Show this screen.

Motion is configured using a config file only. If none is supplied,
it will read motion.conf from current directory, ~/.motion or /etc.

lolobyte

Hi @Snille

before i made a MM2, i started with a motion cam. It’s running now roundabout a half year outside from 30 ° to -20 ° C.

I tried to insert my IP and port, but it don’t’ run.

Any proposal to try a forensic research where to find the shitty error?

lolobyte

@strawberry-3.141

Hy @strawberry-3-141

how i said.
In the menu “Module” “Verfügar” were in the past a lot of available modules after a pull down. Now there is nothing. He give a error message “Fehlgeschlagen: Module können nicht aktualisiert werden!”

At “Installiert” all my installed on configured modules in the config.js are available. Wen i chose then a Module to see the details an wish to go back then the “verfügbar” entry is chosen by the app. In my opinion it may be better to chose “Installiert”

What happens after the evaluation step?

lolobyte

Hello @Goldjunge_Chriz ,

i have allready 2 mirrors in your pipeline ordered.

How is the situation about the pricing if i take one more mirror with the dimension 40x60 (0,24m²) Have to pay 0,4m² or 0,24m²?

lolobyte

Hi, read this…

https://forum.magicmirror.builders/topic/1326/ipwhitelist-howto/11

lolobyte

No, every PC, Mac or Linux system witch is compatible which electron node js.

See http://electron.atom.io/

lolobyte

@simongaviria1

Mirror see Hardware topic.

Frame, self made, IKEA, old mirror frame and so on

lolobyte

@Nususu
Wow, nice.
Please send me all your information what you have because i want to build and test it by my mirror.

lolobyte

@trekky
I pickup some mirror also for the region Stuttgart / Ulm / Augsburg :-).

Some Guy’s are from your neighborhood.
You may contact them here.

for example @sero or @yaye or @jupilde from Stuttgart or @mire from Ludwigsburg.
@webmasterrm is from Esslingen. I think he is the best alternative for you!

lolobyte

@trekky

Hello, you may try to ask @Goldjunge_Chriz .
He organize this ordering marathon.

Maybe yes, but only if you pickup the mirror in Schweinfurt or someone else from your neighborhood pick it up for you.

Where are you from? Witch location?

lolobyte

@Nususu

I think this is not a software problem.

On your Sensor are two variable resistors.

One for the sensitivity and one for the delay time.

Take a screwdriver and adjust the delay time.

lolobyte

@PhilsterM9

No, the MagicMirror use only the right named config.js.

Move to your config folder with following command in your SSH Terminal session:

cd MagicMirror/config

press “Enter” on your Keyboard.

type following command in your SSH Terminal session

ls

and “enter”

what is the result in your SSH Terminal session. What is displayed?

lolobyte

You have install unclutter but not configure it!

start a ssh session, log in to you pi an type following command:

sudo nano /home/pi/.config/lxsession/LXDE-pi/autostart

The entries of this file begins wit an @ for program’s witch are started by a GUI

@xscreensaver -no-splash
@xset s off
@xset -dpms
@xset s noblank
@unclutter

After saving this, restart your pi an check the status of you mouse cursor.

lolobyte

@Goldjunge_Chriz
Hey guys.

@binderth please check this and give it a go.

To members listed here. Please confirm your pickup in Heilbronn/Augsburg
If other members wish this service, please post it here.

lolobyte

@Goldjunge_Chriz what is with this order @Jeff | 0,40m² | maybe | not in master list (order change)?
Canceling or accepting?

lolobyte

Hey guys.

@binderth please check this and give it a go.

@Goldjunge_Chriz what is with this order @Jeff | 0,40m² | maybe | not in master list (order change)?
Canceling or accepting?

To members listed here. Please confirm your pickup in Heilbronn/Augsburg
If other members wish this service, please post it here.

The total weight for me is actually 54,33kg for both Teams.
Permissible total weight in my car = 550 kg
Luggage compartment volume = 455l / 1590l (Folded back seat bench)