Finished my first Magic Mirror build this weekend.
My build:
Raspberry Pi 3B
Older Dell monitor that I had in storage
Ikea Edsbruk 19 ¾x27 ½ frame
I built a support frame using 1x2inch boards and attached that to the back of the Ikea frame with 1 inch corner brackets
I initially tried to use mirror film on the Ikea plexiglass but that was a giant fail so I ended up buying a two way mirror plexiglass sheet from Canal Plastics in NYC.
Initial programming
[image: 1598838686700-img_1053-resized.jpg]
Frame-- I cleaned up the wiring with some zip ties and brackets before securing the support frame to the Ikea frame permanently.
[image: 1598838973518-image-from-ios-2.jpg]
Final setup… with dog.
[image: 1598839113731-image-from-ios-3-resized.jpg]
On the wall.
[image: 1598839149086-img_1432-resized.jpg]