@sdetweil
thx for help.
for me its not clear where i can find the information?
Is it on the booting sequence for raspberry?
@sdetweil
thx for help.
for me its not clear where i can find the information?
Is it on the booting sequence for raspberry?
@sdetweil
Hi,
Sorry for answering so late.
The problem already exists.☹️
To modify the Text file doesen’t solve the problem.
I have actually no solution.
Do u have another hint?
Hi,
I saw this file, but there is no vc4.force_hotplug Parameter listet.
Should I easily add it?
Hi,
Thx for your answer.
I saw your Information on the end.
But I can’t find the related .txt file under path
/boot/firmware/cmdline.txt
There is not a folder firmware inside.
Do you have perhaps another solution??
Thanks in advance
Hi,
im using the MMM-Pir module.
I set the timer on 30 second. If i move in front of the sensor the time resets itself and starts the countdown for new.
so far so good!
if the sensor does not detect any movement the screen disappears and the monitor switch off into standby mode.
so far so good!
but after another 30 seconds in Standby mode the Screen turns on automatically without any movement.
I have already taped over the sensor that im sure there is no movement possible. Same problem again.
it seems to be on a endless loop.
Does anybody know this problem??
@MarcLandis
Thank u very much!
Kind regards
Thanks.
I switched te Module to hirschberger.
It looks like working.
Do you know there is a chance to Look how many times currently I call or use the API?
I can’t find anything in my open weather account?
Hi guys,
im using the MMM-openWeatherForeast (guess its jclarke0000 version),
the module is running on two devices with the same API-key.
The application has not been working for 3 days.
The screen shows only the loading message all the time on both devices .
I think the problem is with the API key.
What module do you guys using now, which is working??
I have already registered for an api 3.0 key. But i cant find any changes in my account on open weather. Do you know if create a new api key takes a while? in which subpoint can i find it?
Hi guys,
i installed the MMM-Pir module yesterday.
I see the count-down. If the time is over the monitor turns black.
If the sensor registered movements the the picture appears again.
i guess the the sensor is working correctly.
so far so good…
Im just wondering that the screen shows only a dark picture and its in on mode.
There is no chance to fell into energy saving mode.
It should be no signal on the screen interface. If this happend the screen has also no signal an turn into energy saving mode.
Does anybody has an idea how to say into the PIR module if the count-down is over send no signal or deaktivate the hdmi or micro hdmi output??
Thanks in advance
hello, good evening,
does anybody know how to put the first line left aligned
without the blue marked gab??