Solution: This is what it looks like if you provide a non-existing list name…:man_facepalming:

Hi folks,

anyone recently seen this error with MMM-Bring?

[2020-09-24 13:11:39.995] [ERROR]  (node:1166) UnhandledPromiseRejectionWarning: Error: Request failed with status code 404
    at createError (/home/pi/mm_prod/MagicMirror/modules/MMM-Bring/node_modules/axios/lib/core/createError.js:16:15)
    at settle (/home/pi/mm_prod/MagicMirror/modules/MMM-Bring/node_modules/axios/lib/core/settle.js:17:12)
    at IncomingMessage.handleStreamEnd (/home/pi/mm_prod/MagicMirror/modules/MMM-Bring/node_modules/axios/lib/adapters/http.js:237:11)
    at IncomingMessage.emit (events.js:205:15)
    at endReadableNT (_stream_readable.js:1154:12)
    at processTicksAndRejections (internal/process/task_queues.js:84:9)
[2020-09-24 13:11:39.997] [ERROR]  (node:1166) UnhandledPromiseRejectionWarning: Error: Request failed with status code 404
    at createError (/home/pi/mm_prod/MagicMirror/modules/MMM-Bring/node_modules/axios/lib/core/createError.js:16:15)
    at settle (/home/pi/mm_prod/MagicMirror/modules/MMM-Bring/node_modules/axios/lib/core/settle.js:17:12)
    at IncomingMessage.handleStreamEnd (/home/pi/mm_prod/MagicMirror/modules/MMM-Bring/node_modules/axios/lib/adapters/http.js:237:11)
    at IncomingMessage.emit (events.js:205:15)
    at endReadableNT (_stream_readable.js:1154:12)
    at processTicksAndRejections (internal/process/task_queues.js:84:9)
[2020-09-24 13:11:40.000] [ERROR]  (node:1166) UnhandledPromiseRejectionWarning: Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). (rejection id: 4)
[2020-09-24 13:11:40.002] [ERROR]  (node:1166) UnhandledPromiseRejectionWarning: Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). (rejection id: 4)

Thanks & regards,

secdude

Thanks for that!

Thanks for letting me know!

Hallo Josef,

how happy are you with the chrome spy mirror glas? is the reflected image brigth enough or is it too dark to operate as the main bathroom mirror? Any comments from the wife?;) I’m about to order the same from glas star.

Beste Grüsse,
Mat

Hi @Fozi ,

how happy are you with your mirror glas choice? Thinking about also ordering the chrome spy from glas-star. I will also place it in a bathroom with lots of daylight, does it pass the wife test in terms of not being to dark in what it reflects when you watch yourself in the mirror?

Beste Grüße,
Mat

@Adrien said in Strip Down Guide for BenQ 28" VA Monitor GC2870H:

Hey folks, long time no see !

I have found the solution, there is a green cable coming from the electrical transformer to the electronic card, cut the wire and put a relay, instant display, minimal electrical consumption :)

Sorry if i am not clear

Hi Adrien, hope you will still read this even it is long ago. Maybe I’m planning to do the same way as you did. Can you share what relay you used? So instant display turn on with no logos at all? how are your longterm experiences?

Thanks,
Mat

@yep_DD

What mirror thickness did you choose? 4mm or 6mm? And why?

had the same issue with a brand spankin new installation of raspian noobs full and apt-get update/upgrade/dist-upgrade done. freshly set up. the install oneliner failed. only manual setup worked. using a rpi3. maybe there’s a broken dependency somewhere?

@spitzlbergerj Danke fuer die Einschaetzung :)