@justjim1220 said in O365 task solution?:

@schwoediauer

Which aspect of Office 365 are you referring to?

Tasks. Or Aufgaben in German. The tasks you also see in Outlook.

It would work without internet. But what should it display? It doesn’t know current temperature (unless you add a local thermostat), it doesn’t know any calendar entries, no news, nothing.

You would only have static information like compliments. And I don’t think it will be useful with this

Some links from my bookmarks:

1. https://www.facebook.com/seb.sau/media_set?set=a.10154158380761323.1073741834.554411322&type=3
2. https://howchoo.com/project/mzu3ndm2otu/building-a-voice-controlled-smart-mirror-with-raspberry-pi-and-jasper
3. https://catoantonsen.wordpress.com/2016/09/24/magic-mirror-version-1/

All 3 blogs show their approach how to keep the mirror glass and the monitor in place.

henry: Stop posting your advertisement all over the forum, please stick with your one post.

@tbs86 said in Clocks have two different times?:

actually the clock above current weather is stuck on the same time and does not change.

Current weather shows sunrise / sunset time, not current time ;)

Well. You could add a battery pack to the pi, react on the “power loss” and shut the pi down correctly. On the other hand, it should not consume too much energy at all.
Just make sure power is not simply cut off or your file system at some point might become corrupted

Nice end result, well done. Your woodwork looks very professional

Interesting approach. What happens, if you put the tv into standby? Is usb turned off then causing the Pi to loose power? Or is the pi still running?

Since you cannot put your tv into standby via CEC I guess you have to find a hardware way. You should analyze the button panel of your screen and see if you can simulate pressing the power button of your screen via relay/gpio

Would you just like to see some alert or message on screen? Or do you want to see the status all the time?

You could use the syslog module to let your scripts send some content to the magic mirror: https://github.com/paviro/MMM-syslog