@Dom1n1c said in Two way mirror order in Germany:

@yawns I can not confirm this.

Oh, really? @DirkS for example says it is darker than ordinary mirrors

@Dom1n1c said in Two way mirror order in Germany:

I ordered mine here:
https://www.myspiegel.de/spionspiegel-pg-2102.html

they are offering a mirror with 8mm thickness for 216€ / sqm
Shipping will cost 7,50€ they have own drivers, who are only tranporting glass/mirrors, so they have the knowledge.

Right, but the mirror they offer is way darker than the one offered by Goldjunge_chriz … at least the pictures look like that

Mirror glas looks good. Does it have sharp/rough edges? Or are they available polished/smoothened as well?

Sure. You could run a script which dives into every subfolder and runs git pull
Take a look here for several solutions: http://stackoverflow.com/questions/3497123/run-git-pull-over-all-subdirectories

Or take a look at this: https://myrepos.branchable.com/
I think I will try myrepos on the weekend

What do you mean? Update like “git pull”? Or force all modules to update their content? Or force updateDom()?

Please post your config file here or paste it into jshint.com to find any missing commas, brackets or similar things.

To shutdown the mirror I will use the remote tool, but to be sure there is no standby or whatever when I leave the house for couple of days, I intend to add a light switch on the wall next to the mirror which toggles the power outlets the mirror is connected to. However I am not yet at a stage to really build the mirror and the house is still being built, so the “target wall” does not yet exist.

Looks great, good job Stefan.

This was already completed …

DHT11/DHT22 sensors:
https://forum.magicmirror.builders/topic/726/mmm-temperature-humidity-module-dht11-dht22-and-am2302-sensors by @psk
https://forum.magicmirror.builders/topic/738/mmm-dht22-humidity-and-temperature-module by @Bangee

DS18B20 sensor:
https://forum.magicmirror.builders/topic/887/mmm-temp-ds18b20 by @Thlb0

Choose one :)

Sure. Is your magicmirror in the living room as well? Then you could simply add a small temperature sensor like DS18B20 or a temperature/humidity sensor like DHT11 & DHT22 to your mirror frame, use 3 wires (5v, ground, data) to GPIO ports or your raspberry and add a small module to display the data