Default Weather module still not displaying

[OldSunGuy]

May I ask how you are using

classes: "daytime_scheduler"

Are there two instances of

daytime_scheduler

I use

classes: “currentweather”

type: “current”

and

classes: “weatherforcast”

type: “forecast”

to replace the deprecated modules.

[sdetweil]

@Jarhead96097 use my install script

see
https://github.com/sdetweil/MagicMirror_scripts

[Jarhead96097]

@sdetweil “On branch master,” and up to date with origin/master. I also meant to reply earlier that this is on a RPI 4B. Unfortunately, still getting the same error and the weather module is not displaying information.

I appreciate everyone’s time…but I’m going to cut to the chase and rebuild using your install script.

Thanks again for the time, you’re always very helpful, and I appreciate it.

[sdetweil]

@Jarhead96097 ah, one other question, what is the current node level

node --version

[Jarhead96097]

@sdetweil sorry, already using your installation script (but no “npm audit fix” this time around).

[Blackeye]

@sdetweil On my RPi4 it’s 16.16.0, and I’m getting the same problems as Jarhead. After an upgrade there’s now just no reaction to starting mm.

[sdetweil]

@Blackeye can u show the output of the npm start or, if using pm2 , then

pm2 logs --lines=50

how did u do the upgrade?

[sdetweil]

@Blackeye also, can u show me the contents of line 159 from

~/MagicMirror/modules/default/weather/weather.js

[Jarhead96097]

@OldSunGuy I use the MMM-ModuleScheduler 3rd party module to control when my MM turns off everything except the clock and dims the display at night. “daytime_scheduler” is the class I used to turn off those modules at night.

[Jarhead96097]

@sdetweil here is what my weather.js (newly rebuilt, but not yet configured) has on lines 148 to 166:

	// What to do when the weather provider has new information available?
	updateAvailable: function () {
		Log.log("New weather information available.");
		this.updateDom(0);
		this.scheduleUpdate();

		if (this.weatherProvider.currentWeather()) {
			this.sendNotification("CURRENTWEATHER_TYPE", { type: this.weatherProvider.currentWeather().weatherType.replace("-", "_") });
		}

		const notificationPayload = {
			currentWeather: this.weatherProvider?.currentWeatherObject?.simpleClone() ?? null,
			forecastArray: this.weatherProvider?.weatherForecastArray?.map((ar) => ar.simpleClone()) ?? [],
			hourlyArray: this.weatherProvider?.weatherHourlyArray?.map((ar) => ar.simpleClone()) ?? [],
			locationName: this.weatherProvider?.fetchedLocationName,
			providerName: this.weatherProvider.providerName
		};
		this.sendNotification("WEATHER_UPDATED", notificationPayload);
	},

[Jarhead96097]

@sdetweil Sam, thanks for all of your help. I’ve finished rebuilding without running ‘npm audit fix’ and everything is working as it should! I used your installation script and everything worked fine. I also took the opportunity to move things around and try a couple of new 3rd party modules… everything is back to normal!

Thanks again,
Jarhead96097

[sdetweil]

@Jarhead96097 said in Default Weather module still not displaying:

  const notificationPayload = {
  	currentWeather: this.weatherProvider?.currentWeatherObject?.simpleClone() ?? null,

thats line 158 and159.

the only thing i can think of is the ?. (optional chaining) operator…
but its been long supported… and it works on my 16.9.1 node version

see item 2 in the list here
https://www.freecodecamp.org/news/how-the-question-mark-works-in-javascript/

[sdetweil]

@Jarhead96097 great news!!!

[Blackeye]

@sdetweil Moin, line 159 of weather-js looks like this:

currentWeather: this.weatherProvider?.currentWeatherObject?.simpleClone() ?? null,

The pm2 error log shows:

/home/<myusername>/.pm2/logs/MagicMirror-error.log last 50 lines:
1|MagicMir | failed to load swrast driver
1|MagicMir | [06.08.2022 09:46.00.374] [ERROR] WARNING! Could not load config file. Starting with default configuration. Error found: Error: The module '/home/lookyhere/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll/build/Release/epoll.node'
1|MagicMir | was compiled against a different Node.js version using
1|MagicMir | NODE_MODULE_VERSION 73. This version of Node.js requires
1|MagicMir | NODE_MODULE_VERSION 107. Please try re-compiling or re-installing
1|MagicMir | the module (for instance, using `npm rebuild` or `npm install`).

Looks like I should re-install. Which is the best method, in your opinion?
Many thanks for your help - I want to get this thing on the wall soon!

[sdetweil]

@Blackeye see

https://forum.magicmirror.builders/topic/16074/electron-rebuild-and-magicmirror-v2-18-and-more?page=1

[Blackeye]

@sdetweil Hi Sam, Many thanks for the suggestion - I followed your advice on that page. Here’s what happened halfway through:

from ../src/epoll.cc:11:
/home/<myusername>/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll/20.0.1/include/node/v8-ma                                     ybe.h:106:45: error: ‘is_lvalue_reference_v’ is not a member of ‘std’; did you mean ‘is_lvalue_                                     reference’?
  106 |   template <class U, std::enable_if_t<!std::is_lvalue_reference_v<U>>*>
      |                                             ^~~~~~~~~~~~~~~~~~~~~
      |                                             is_lvalue_reference
/home/<myusername>/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll/20.0.1/include/node/v8-ma                                     ybe.h:106:66: warning: logical not is only applied to the left hand side of comparison [-Wlogic                                     al-not-parentheses]
  106 |   template <class U, std::enable_if_t<!std::is_lvalue_reference_v<U>>*>
      |                                                                  ^
/home/<myusername>/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll/20.0.1/include/node/v8-ma                                     ybe.h:106:67: error: template argument 1 is invalid
  106 |   template <class U, std::enable_if_t<!std::is_lvalue_reference_v<U>>*>
      |                                                                   ^
/home/<myusername>/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll/20.0.1/include/node/v8-ma                                     ybe.h:106:71: error: expected unqualified-id before ‘>’ token
  106 |   template <class U, std::enable_if_t<!std::is_lvalue_reference_v<U>>*>
      |                                                                       ^
/home/<myusername>/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll/20.0.1/include/node/v8-ma                                     ybe.h:123:43: error: ‘is_lvalue_reference_v’ is not a member of ‘std’; did you mean ‘is_lvalue_                                     reference’?
  123 | template <class T, std::enable_if_t<!std::is_lvalue_reference_v<T>>* = nullptr>

and finally:

✖ MagicMirror Rebuild Failed

An unhandled error occurred inside electron-rebuild
node-gyp failed to rebuild '/home/<myusername>/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epo                                     ll'.
Error: `make` failed with exit code: 2

This will all mean a lot more to you than it does for me.

[Blackeye]

@sdetweil And this is the final part of the error message, in bright red:

 at ModuleRebuilder.rebuildNodeGypModule (/home/<myusername>/MagicMirror/modules/MMM-PIR-Sensor                                     /node_modules/magicmirror-rebuild/build/module-rebuilder.js:193:19)
    at processTicksAndRejections (node:internal/process/task_queues:96:5)
    at async Rebuilder.rebuildModuleAt (/home/<myusername>/MagicMirror/modules/MMM-PIR-Sensor/node                                     _modules/magicmirror-rebuild/build/rebuild.js:180:9)
    at async Rebuilder.rebuild (/home/<myusername>/MagicMirror/modules/MMM-PIR-Sensor/node_modules                                     /magicmirror-rebuild/build/rebuild.js:143:17)
    at async /home/<myusername>/MagicMirror/modules/MMM-PIR-Sensor/node_modules/magicmirror-rebuil                                     d/build/cli.js:141:9

[sdetweil]

@Blackeye hm. 1st time I’ve seen his tools fail…

@bugsounet any guidance

[bugsounet]

@sdetweil yes

epoll/20.0.1 means it uses electron v20.0.1 for MagicMirror instead of v19.x that why it crash.

I’ll leave it up to you to explain it :)

[sdetweil]

@Blackeye ok, heres a way around the problem

fix MM install to have one new tool

cd ~/MagicMirror
npm install electron-rebuild

fix MMM-PIR-Sensor

cd ~/MagicMirror/modules/MMM-PIR-Sensor
nano package.json 

scroll down to

  "scripts": {
    "postinstall": "node_modules/.bin/electron-rebuild -e ../../node_modules/electron"
  },

change the postinstall line so it looks like this

  "scripts": {
    "postinstall": "~/MagicMirror/node_modules/.bin/electron-rebuild -e ../../node_modules/electron"
  },

ctrl-o to save the updated package.json
ctrl-x to exit the editor

then

npm install

should work correctly now

I just tested this on my MM 2.20 version, on both my linux machine and my pi4 with bullseye