MMM-RAIN-MAP (new: version 2.x)

[hogedir]

I have an issue, I want to setup rain map to france, but I have that : NO MAP at all (with openmap) can you help me please? thanks.

[Jalibu]

@hogedir can you please create an issue on github for that? Without further information (config, version) it is hard to find the reason 😉

[hogedir]

@Jalibu ok no problem. can you indicate me where i can find some logs for this module especially?

[Jalibu]

@hogedir in the Browser‘s console log and net tab

[hogedir]

@Jalibu it’s simply a raspi 4B 8GB, with a normal installation of MMM. I don’t know if i need to open a bug, it’s just the dump of the map that doesn’t work as you see on the screen.

A question : Your module accept FRENCH locations no for the rain map ?

Your module works well here, it’s only the map that is not get.

I don’t have any blocker in the dns. so I don’t undertand because all the other modules works fine, except of that map dump.

Here is my config.js :

{
module: “MMM-RAIN-MAP”,
position: “top_center”,
config: {
animationSpeedMs: 400,
colorScheme: 2,
colorizeTime: true,
defaultZoomLevel: 8,
displayTime: true,
displayTimeline: true,
displayClockSymbol: true,
displayHoursBeforeRain: -1,
extraDelayLastFrameMs: 1000,
extraDelayCurrentFrameMs: 3000,
// markers: [
// { lat: 49.41, lng: 8.717, color: “red” },
// { lat: 48.856, lng: 2.35, color: “green” },
// ],
// mapPositions: [
// { lat: 8.717, lng: -2.725, zoom: 9, loops: 1 },
// { lat: 8.717, lng: -2.725, zoom: 6, loops: 2 },
// { lat: 48.856, lng: 2.35, zoom: 6, loops: 1 },
// { lat: 48.856, lng: 2.35, zoom: 9, loops: 2 },
// { lat: 49.15, lng: 6.154, zoom: 5, loops: 2 },
// ],
// mapUrl: “https://a.tile.openstreetmap.de/48.2649/{x}/{y}.png”,
mapUrl: “https://a.tile.openstreetmap.de/#map=8/48.471/-2.725”,
// mapUrl: “https://tiles.wmflabs.org/bw-mapnik/8/48.471/-2.725”,
mapHeight: “420px”, // must be a pixel value (no percent)
mapWidth: “420px”, // must be a pixel value (no percent)
maxHistoryFrames: -1,
maxForecastFrames: -1,
substitudeModules: [],
updateIntervalInSeconds: 300,
}
},

[Jalibu]

@hogedir your configuration is buggy. Please read the module’s Readme.
You don’t have to (and should not) change the mapUrl at all.
Use mapPositions to justify it. The module should work world-wide.
I’d recommend to use the default values whenever possible and just to set values you need to override.

Does that work for you?

{
 module: "MMM-RAIN-MAP",
 position: "top_center",
 config: {
  mapPositions: [
   { lat: 48.472, lng: -2.725 }    
  ]
 }
}

[hogedir]

@Jalibu Thanks. I copied your code, and nothing again. No map.

[sdetweil]

@hogedir can you show the messages at mm startup?

either npm start or if you use pm2, then

pm2 logs --lines=50

[Jalibu]

@hogedir I noticed there were wrong double quote characters in the code of my last post.
Please try again with the code below. Otherwise, please open an issue on GitHub and provide all the information asked in the form (entire config & logs)

{
 module: "MMM-RAIN-MAP",
 position: "top_center",
 config: {
  mapPositions: [
   { lat: 48.472, lng: -2.725 }    
  ]
 }
}

[hogedir]

@hogedir @Jalibu it’s working now Thanks ! : the map is showing well now BUT the rain is not showed very well !

I compared what i see outside of my home and we had 5minutes before some rain and your data flow is not precise at all, i did not saw a rain in my region on your map but i saw it in weatherplaza.

I give you the page which is more precise and realistic than the rain data you have in the module : https://www.weerplaza.nl/regenradar/europa/frankrijk/

Map of rains with weather plaza : :

Map of rains with your module : :

Lots of difference, weather plaza is realistic (i checked outside 2 times yesterday, your module did not show well the rain.)

• Second thing, I noticed something too : i want the “pause” time before the red zone to be more fast (some mms more fast). is it possible to change the “pause timer” ? Thanks