Read the statement by Michael Teeuw here.
MagicMirror v2.1.0 Update error
-
I did try to configure an external
compliments.jsonfile, however it seems that it is not interpreted, since I do get again the default compliments.
The file is located within the config directory.
My configuration:{ module: 'compliments', position: 'lower_third', config: { remoteFile: 'compliments.json' } },Do you have a hint what might be wrong ?
-
@Steff Due to my own incompetence when dealing with javascript, the external file needs to have quotes around the array names. If you are expanding the arrays within the
config.jsfile, then you must remove the quotes from around the names.
So this would work in theconfig.jsfile:evening : [ "Einen Cocktail ?", "Wow, Du bist aber heiss heute...", "Wollen wir heute abend weggehen ?" ]and this should work in the external compliments file:
"evening" : [ "Einen Cocktail ?", "Wow, Du bist aber heiss heute...", "Wollen wir heute abend weggehen ?" ]It’s a bug. But I’m a Java programmer, not a Javascript programmer. I don’t know how to fix it.
-
Hi all,
After update my MM and want to open the mm via http://ip:8080 i get a blank Black screen. It comes on Win10 and also Android with Chrome.
The Majorfailure is, the rpi stop working. So i can only disconnect the power and connect again.
Has anybody else this issue?
Regals
Daniel -
No, not such a major issue with the pi.
Can you access your pi with ssh?
Take a look at
https://forum.magicmirror.builders/topic/1326/ipwhitelist-howto/
-
At the Moment it works. I have update and dist-upgrade the rpi. Thanks for helping.
-
Hi, after update
pi@raspberrypi:~ sudo git pull
…my MM does not start anymore, so i tried from terminal and getting this error:
*pi@raspberrypi:~ $ ./mm.sh
>magicmirror@2.1.0 start /home/pi/MagicMirror
>electron js/electron.jsApp threw an error during load
Error: Cannot find module ‘express-ipfilter’
at Module._resolveFilename (module.js:455:15)
at Function.Module._resolveFilename (/home/pi/MagicMirror/node_modules/electron-prebuilt/dist/resources/electron.asar/common/reset-search-paths.js:35:12)
at Function.Module._load (module.js:403:25)
at Module.require (module.js:483:17)
at require (internal/module.js:20:19)
at Object. (/home/pi/MagicMirror/js/server.js:13:16)
at Module._compile (module.js:556:32)
at Object.Module._extensions…js (module.js:565:10)
at Module.load (module.js:473:32)
at tryModuleLoad (module.js:432:12)
A JavaScript error occurred in the main process
Uncaught Exception:
Error: Cannot find module ‘express-ipfilter’
at Module._resolveFilename (module.js:455:15)
at Function.Module._resolveFilename (/home/pi/MagicMirror/node_modules/electron-prebuilt/dist/resources/electron.asar/common/reset-search-paths.js:35:12)
at Function.Module._load (module.js:403:25)
at Module.require (module.js:483:17)
at require (internal/module.js:20:19)
at Object. (/home/pi/MagicMirror/js/server.js:13:16)
at Module._compile (module.js:556:32)
at Object.Module._extensions…js (module.js:565:10)
at Module.load (module.js:473:32)
at tryModuleLoad (module.js:432:12)* -
@teandryk
Please runnpm installin the main MagicMirror folder -
I think, i Set up a New raspian with New Installation of mm. This update was Not a good idea…
-
@yawns I did and thats what i got now :)
pi@raspberrypi:~/MagicMirror $ npm install \ \> electron@1.4.13 postinstall /home/pi/MagicMirror/node_modules/electron \> node install.js \> electron-prebuilt@1.4.13 postinstall /home/pi/MagicMirror/node_modules/electron-prebuilt \> node install.js npm WARN unmet dependency /home/pi/MagicMirror/node_modules/grunt-eslint/node_modules/eslint/node_modules/escope/node_modules/esrecurse requires estraverse@'~4.1.0' but will load npm WARN unmet dependency /home/pi/MagicMirror/node_modules/grunt-eslint/node_modules/eslint/node_modules/estraverse, npm WARN unmet dependency which is version 4.2.0 npm ERR! Linux 4.4.21-v7+ npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "install" npm ERR! node v4.3.2 npm ERR! npm v2.14.12 npm ERR! code EPEERINVALID npm ERR! peerinvalid The package grunt@1.0.1 does not satisfy its siblings' peerDependencies requirements! npm ERR! peerinvalid Peer grunt-yamllint@0.2.0 wants grunt@~0.4.0 npm ERR! peerinvalid Peer grunt-eslint@19.0.0 wants grunt@>=0.4.0 npm ERR! Please include the following file with any support request: npm ERR! /home/pi/MagicMirror/npm-debug.log -
@teandryk I too had this problem earlier today. I solved it by navigating to /node_modules/electron
and run “sudo node install.js”. Have some patience - it took a loooong time. I ended up leaving it and went to do something else. When I got back half an hour later it was done and the mirror was running.Hope it helps. Good luck :-)
-
@arosenhave
It worked and even didnt took a split sec :)thanks !!!
-
@teandryk @arosenhave Hello, I have run into the same issue wanting to install the magic mirror² framework on my windows laptop to develop a module. Running sudo node install.js from my powershell or from a node.js prompt did nothing to solve my problem. As far as I gathered, the issue come from this 2 not-updated packages that MagicMiror is using : https://github.com/geedew/grunt-yamllint/blob/master/package.json and the one called grunt-eslint. Both did not update their package.json (and maybe code) as the grunt developpers asked : http://gruntjs.com/blog/2016-04-04-grunt-1.0.0-released#peer-dependencies . Here is a topic on a forum surrounding that updating issue. However I am uncertain about what to do right now to solve it since the raspeberry pi environment and a laptop are not similar.
-
@poutr if you are running on Windows just type
npm installin the main folder and you should be good to go (assuming you have node.js installed on your pc) -
@tosti007 Well, it’s the
npm installthat failed. But updating npm solved the issue since I had npm version 2.x.x (I think, not sure since I did not save the command prompt before the update). From the grunt dev page, higher npm version only raises warning for lower version number requirements and does nothing for
"grunt" : ">=version_number"Which is good.
Forgot to report that the solution there worked when I tested https://forum.magicmirror.builders/topic/971/dependency-problems/6
Thank you for responding promptly to my post !
-
@poutr alright good to hear that’s the problem is solved!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login