PIR sensor to turn on LED strip

[Egnos]

@sdetweil said in PIR sensor to turn on LED strip:

@Egnos from the 3rd party modules list, maybe

This module https://github.com/idoodler/MMM-RPI-LED it seems it cannot be controlled with notifications.

[sdetweil]

@Egnos that could be added pretty easily.

[Egnos]

@sdetweil said in PIR sensor to turn on LED strip:

that could be added pretty easily

The problem is that I don’t have the skills to program. I understand something … but not enough … unfortunately

[sdetweil]

@Egnos well, there ARE people who could do it…

[sdetweil]

@Egnos what actions would u like the LEDs to do on notification? and what would u think the notification ID string should be?

[Egnos]

@sdetweil said in PIR sensor to turn on LED strip:

what actions would u like the LEDs to do on notification? and what would u think the notification ID string should be?

Initially it would be enough to turn on the LEDs at the same time as the monitor is turned on and turn them off when the monitor is turned off.

For the notification I believe that the module that manages the LEDs should respond to a notification such as “LightOn-White” and “LightOff-White” generated by the module that manages the PIR sensor variations.
I hope I haven’t said too many wrong things … 🤞

[sdetweil]

@Egnos that led module can only on/off/ or blink

[Egnos]

@sdetweil said in PIR sensor to turn on LED strip:

that led module can only on/off/ or blink

At the moment I could be satisfied … but it does not seem that the module proposed by you can receive notifications.

[sdetweil]

@Egnos notifications are easy… but this module rpi-leds, only toggles the leds ON the pi board… not led strip…

if u can find one that works the ed strip with a python command, then we can make that work

[Egnos]

@sdetweil said in PIR sensor to turn on LED strip:

but this module rpi-leds, only toggles the leds ON the pi board… not led strip…

Maybe this module could fit https://github.com/jc21/MMM-PiLights, using SPI and a LPD8806 or WS2801 LED strip.

@sdetweil said in PIR sensor to turn on LED strip:

if u can find one that works the ed strip with a python command, then we can make that work

It appears to respond to notifications:

this.sendNotification('PILIGHTS_SEQUENCE', 'blue_pulse');

[sdetweil]

@Egnos it has a way for all off. but not all on.

[sdetweil]

@Egnos use my updated fork…

https://github.com/sdetweil/MMM-PiLights

it responds to the PIR modules USER_PRESENCE notification (true = turn on, false = turn off)

if lights are off and on is sent, it will restore the previous sequence set with the normal
SEQUENCE notification

[wishmaster270]

Hi,

I would suggest the solution of @sdetweil as well.

An other, but much more complicate version would be to use my PythonLedControl and control it with the MMM-MQTTbridge module.

[Egnos]

@sdetweil said in PIR sensor to turn on LED strip:

use my updated fork…
https://github.com/sdetweil/MMM-PiLights
it responds to the PIR modules USER_PRESENCE notification (true = turn on, false = turn off)
if lights are off and on is sent, it will restore the previous sequence set with the normal
SEQUENCE notification

Thanks @sdetweil

Let’s see if I understand:

• By default the LEDs will be off, until the “MMM-GPIO-Notifications” module detects something.
• If the PIR detects the movement the “MMM-GPIO-Notifications” module will send the notification USER_PRESENCE = true and the LEDs will turn on
• After some time without movement the “MMM-GPIO-Notifications” module will send the notification USER_PRESENCE = false and the LEDs will turn off

Correct?

I’m not a developer, but I’m still trying to understand your change in the code:

else if (notification === ' USER_PRESENCE'){
            if(payload == false){
                this.leds.allOFF();
            } else {
                // user present, restore the last active sequence
                Promise.resolve(this.runSequence(this.lastSequence.sequence, thi,lastSequence.iterations,this.lastSequence.delay)
                .catch((err) => {
                    this.log('user present Sequence error: ' + err.message);
                }));

why can’t I see this notification in the code?

(notification === ' USER_PRESENCE'){
            if(payload == true){
                this.leds.allON();
            }

Thanks again!

[MMRIZE]

@Egnos
' USER_PRESENCE' !== 'USER_PRESENCE'

[sdetweil]

@Egnos fixed the typo, git pull for the update

[sdetweil]

@MMRIZE good catch

[sdetweil]

@Egnos u don’t need the GPIO_Notifications module. as the PIR modules send the USER_PRESENCE notification

[Egnos]

@sdetweil said in PIR sensor to turn on LED strip:

u don’t need the GPIO_Notifications module. as the PIR modules send the USER_PRESENCE notification:

The module I use for sending notifications when the PIR detects motion is MMM-GPIO-Notifications
I believe he is sending the “USER_PRESENCE” notification:

notifications: [
            {
              notification: 'USER_PRESENCE',
              payload: true
            },

Thanks for your patience @sdetweil ! ;-)

[sdetweil]

@Egnos ok got it.

what I was saying is that the

MMM-PIR-???

modules, if you use them, THEY send the USER_PRESENCE notification

the GPIO_Notifcations module is more generic and can send notifications for ANY gpio device