MMM-OpenWeatherMapForecast stuck on Loading....

bassin12

I did the code change in node_helpe.js, and the system now reports this error

[29.08.2022 10:34.06.199] [LOG] [MMM-OpenWeatherMapForecast] 29-Aug-22 10:34 ** bad status ** 401

my full config.js is this:

/* MagicMirror² Config Sample
 *
 * By Michael Teeuw https://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * see https://docs.magicmirror.builders/configuration/introduction.html
 * and https://docs.magicmirror.builders/modules/configuration.html
 */
let config = {
	address: "localhost", 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror² is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	locale: "en-US",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

	modules: [
	
		{
			module: "weather",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				weatherProvider: "openweathermap",
				type: "forecast",
				location: "Suwanee",
				locationID: "4225309",
				apiKey: "45fe452eea1fcfe3589cd5e8aa3f3f93" 
			}
		},


          {
                        module: "MMM-OpenWeatherMapForecast",
                        header: "Weather",
                        position: "top_left",
                        classes: "default everyone",
                        disabled: false,
                        config: {
                                apikey: "45fe452eea1fcfe3589cd5e8aa3f3f93",
                                latitude: "51.506130",
                                longitude: "-0.090270",
                                iconset: "4c",
                                concise: false,
                                forecastLayout: "table"
                        }
                },	  	
	]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

sdetweil

@bassin12 yep… something…
both work for me…

sdetweil

@bassin12

hm… I created a new key…

seems OpenWeatherForecast has a bug

in its node_helper.js
’
change

          "&units=" + payload.units +

to (same as openWeatherMapForecast

                    (payload.units !== "" ? "&units=" + payload.units : "") +

can’t pass in junk

sdetweil

@bassin12 if the apikey is valid, I get 401 as well…

using my (new) apikey… all ok…

sdetweil

@bassin12 with that api key data is coming back, but its in the wrong format

i switch to my apikey and all is good

ally

@sdetweil I deleted the MMM-OpenWeatherMapForecast and reinstalled it as per the instructions. Results below, no change.

/home/pi/.pm2/logs/MagicMirror-out.log last 50 lines:
0|MagicMir | [30.08.2022 18:29.44.705] [INFO]  Calendar-Fetcher: Broadcasting 6 events.
0|MagicMir | [30.08.2022 18:32.45.422] [INFO]  Newsfeed-Fetcher: Broadcasting 35 items.
0|MagicMir | [30.08.2022 18:34.45.902] [INFO]  Calendar-Fetcher: Broadcasting 6 events.
0|MagicMir | [30.08.2022 18:37.19.673] [LOG]   [MMM-OpenWeatherMapForecast] 30-Aug-22 18:37 ** ERROR ** null
0|MagicMir | [30.08.2022 18:37.45.605] [INFO]  Newsfeed-Fetcher: Broadcasting 35 items.
0|MagicMir | [30.08.2022 18:39.47.120] [INFO]  Calendar-Fetcher: Broadcasting 6 events.
0|MagicMir | [30.08.2022 18:42.45.793] [INFO]  Newsfeed-Fetcher: Broadcasting 35 items.
0|MagicMir | [30.08.2022 18:44.48.354] [INFO]  Calendar-Fetcher: Broadcasting 6 events.
0|MagicMir | [30.08.2022 18:47.19.775] [LOG]   [MMM-OpenWeatherMapForecast] 30-Aug-22 18:47 ** ERROR ** null
0|MagicMir | [30.08.2022 18:47.45.968] [INFO]  Newsfeed-Fetcher: Broadcasting 35 items.
0|MagicMir | [30.08.2022 18:49.49.561] [INFO]  Calendar-Fetcher: Broadcasting 6 events.
0|MagicMir | [30.08.2022 18:52.46.128] [INFO]  Newsfeed-Fetcher: Broadcasting 35 items.
0|MagicMir | [30.08.2022 18:54.50.794] [INFO]  Calendar-Fetcher: Broadcasting 6 events.
0|MagicMir | [30.08.2022 18:57.19.667] [LOG]   [MMM-OpenWeatherMapForecast] 30-Aug-22 18:57 ** ERROR ** null
0|MagicMir | [30.08.2022 18:57.46.299] [INFO]  Newsfeed-Fetcher: Broadcasting 35 items.
0|MagicMir | [30.08.2022 18:59.52.001] [INFO]  Calendar-Fetcher: Broadcasting 6 events.
0|MagicMir | [30.08.2022 19:02.46.483] [INFO]  Newsfeed-Fetcher: Broadcasting 35 items.
0|MagicMir | [30.08.2022 19:04.53.188] [INFO]  Calendar-Fetcher: Broadcasting 6 events.

Am I doing anything wrong?

Ally

bassin12

I think I was able to get to the bottom of this, you need to subscribe to the API giving your credit card information, also API 2.5 is deprecated for new users, I entered in contact with Open Weather and they have sent me this information.

Hope this helps people in the future.

sdetweil

@ally what instructions?

unless the author changed the code, nothing will change

ally

@bassin12 said in MMM-OpenWeatherMapForecast stuck on Loading....:

I think I was able to get to the bottom of this, you need to subscribe to the API giving your credit card information, also API 2.5 is deprecated for new users, I entered in contact with Open Weather and they have sent me this information.

Hope this helps people in the future.

What service did you subscribe to, as that looks like the only way to enter your credit card info.

Ally

elorand

Hey @ally, I recently ran into the same problem like you.
I followed all instructions given to you from @sdetweil and finally figured out, what the problem was: openweathermap updated its api to version 3.0!
Even if you have a free subscription (limiting to 1000 api-calls a day, which is fine unless you stay above a refreshrate of every 3 minutes), you need to edit the link in node_helper.js from

var url = "https://api.openweathermap.org/data/2.5/onecall" +

to

var url = "https://api.openweathermap.org/data/3.0/onecall" +

For the free subscription on API-Version 3.0, you need to provide your credit card information, but you can set the maximum of possible API-calls to 1000, so that you will never ever ran into any costs.

sdetweil

@elorand the default weather module still uses 2.5 and it works

chief

Just following up on this thread - I also am on the “free tier” 2.5 API version and when I try to use MMM-OpenWeatherForecast, it is stuck on “Loading”.

Any advice?

elorand

@sdetweil I couldn’t choose the old 2.5 API when I registered as new user to OpenWeatherMap. Therefore I had no other chance than to go with the 3.0 API.

@chief depending on the API you are subscribed to, you need to edit the node_helper.js (as mentioned in my previous post). After editing you should restart your magicmirror.

karsten13

@sdetweil

the default weather module still uses 2.5 and it works

at the moment, yes.

I looked into their api stuff and onecall v2.5 is not mentioned anymore. The normal endpoints weather and forecast are still on v2.5.

Problem: For onecall 3.0 you need a special api key (as already mentioned here) with a subsciption where you have to give your payment data (1000 request free per day, limit is 2000 per day but you can set your limit to 1000 if you want it for free … ).

I think we will get problems/questions to this for the default weather module too.

So (for default weather module) if you use endpoints weather and forecast and old onecall v2.5 everthing works out of the box with old api keys, if someone use new onecall v3.0 he needs an api key for 3.0 and has to set apiVersion: "3.0", in the config …

LemonBrain

@ally
Hi!
There was an error “** ERROR ** Error: socket hang up”
This solution helped:
in the module node_helper.js

var url = "https://api.openweathermap.org/data/2.5/onecall" +

replace with

var url = "http://api.openweathermap.org/data/2.5/onecall" +

(https -> http)
and restart the MM2

yk

Was there an agreed solution to this one? Do we need to subscribe separately to the 3.0 API or does the free subscription doable (works with default weather module)?

LemonBrain

@yk
Hello!
I use a free subscription. This subscription apparently has a problem with https protocol. Found out by randomly studying the weather server’s response in the browser.

anhanyoung

@elorand Hey man, I know this was a little while ago but I’m struggling with this atm. I subscribed to 3.0 but when I look at my services tab, it’s still showing the free version. When I create an API, it doesn’t seem to work even with editing the node helper to the url you posted. Is there a specific way to generate an API from them with 3.0?

sdetweil

@anhanyoung try my version. I fixed a loading bug a while back

https://github.com/sdetweil/MMM-OpenWeatherMapForecast

sdetweil

@anhanyoung I see your key is 3.0, but the code uses 2.5.

module needs a new parameter to allow selecting which api group it’s in and use that when constructing the url