Motion Detector

[danielis]

@oscarkindberg try hdmi_blanking=1in /boot/config.txt

[danielis]

@phoenixrising look at the last reply of in_a_days.
If that is not working post your config.js here.

[oscarkindberg]

@danielis Where do I fint that? I’ve searched all the .js files in the module and config.

[danielis]

@oscarkindberg it is the file config.txt in the folder /boot/
type ‘sudo nano /boot/config.txt’ without ’
add as last line:
hdmi_blanking=1

[oscarkindberg]

@danielis Actually got it to work now, changed to “updateInterval: 10000” from “updateInterval: 1000” and in diff-cam-engine.js I changed captureIntervalTime to 1000 instead of 100.

Made it easier on the RBP3 i think.
Downloaded MMM-SystemStats to keep check on sysload during config and it’s lookin’ good now.
Thanks for the help! I’ll comeback with a picture of the mirror as soon as my mirrorglas arrives.

[phoenixrising]

@oscarkindberg where is the updateinterval located?

[oscarkindberg]

@phoenixrising Sorry! I meant timeout: 10000 in config.js file. Copy pasted wrong part

[Jhonte]

@alexyak I’m using raspberry pi 3 with the camera module. And the motiondetection module.

Could not initiate the module before I ran sudo modprobe bcm2835-v4l2 but even after I never get any motion “score”.

I inspected the diffImageData it all contained 0,0,0,255 in series…

The camera works when using raspistill. Any hints of what I can test to debug the camera output within electro?

[phoenixrising]

@Jhonte , post your config file.

[Jhonte]

@phoenixrising said in Motion Detector:

@Jhonte , post your config file.

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 */

var config = {
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"],

	language: 'en',
	timeFormat: 24,
	units: 'metric',

	modules: [
		{
			module: 'motiondetector'
		}
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== 'undefined') {module.exports = config;}