MMM-DWD-Pollen

CarstenD

Added the option to select which Pollen to display through config.

MajorC

I have the DWD-Pollen on the right side of my scree. Unfortunately, there is a gap as you can see in the picture.

I checked the CSS, but it is a table and I can’t see a good way to get rid of the space on the right.

Any idea is appreciated.

MajorC

Update:
I now use:

.MMM-DWD-Pollen table {
	margin-left: auto;
	margin-right: -40px;
}

Not sure if this is a good way, but it works for me at the moment.

CarstenD

@majorc Thanks. Somehow this does not really work on mine. Now the text is stretching into the right border.
But good that it works for you.

MajorC

@carstend that is strange. This is the only css I use for DWD-Pollen. Do you have something else in your custom css?

Klinge

Hello,
maybe someone of you could help me, because in my new opened topic I got no answers unfortunately.
I try to start the module MMM-DWD-Pollen. But the data will not be loaded. I am living in the region “Östl. Niedersachsen”. On the Github site this region is declared with the number “32”. And on the DWD Site it is declared with the number “5”. But both numbers are not working. And now I don´t know which number I can use for my region.
It would be great if someone could help me.
Thank you in advance.

sdetweil

@Klinge if someone knows and is willing to help they will.
this forum is all volunteer community

Klinge

@sdetweil said in MMM-DWD-Pollen:

if someone knows and is willing to help they will.
this forum is all volunteer community

Yes, I know, and that’s absolutely fine, of course. It was just another attempt here.

fatgrandma

@Klinge

The Number on github is the correct one as statet on the github site

“There is a map that sows all part regions (but you have to match it to the numbers shown above)”

Dumb take but did you try to just wait one day? DWD pushes the numbers out once a day, if there are no new ones it shows nothing on the module.

Klinge

@fatgrandma Thank you for your answer.

When I take the wrong number from the DWD site I got the message “No values today. No values tomorrow”. But you are right. In this case I have to wait a day more. I guess DWD published his new values at 11 a.m. every day, doesn´t it?

But when I take the correct number from the github site(!), I get only the message “Loading”. And this has been the case for several days.

CarstenD

Apparently DWD had changed its numbering. I updated the Readme.

Those are the new regions:
10=Schleswig-Holstein und Hamburg
11=Inseln und Marschen
12=Geest,Schleswig-Holstein und Hamburg
20=Mecklenburg-Vorpommern
30=Niedersachsen und Bremen
31=Westl. Niedersachsen/Bremen
32=Östl. Niedersachsen
40=Nordrhein-Westfalen
41=Rhein.-Westfäl. Tiefland
42=Ostwestfalen
43=Mittelgebirge NRW
50=Brandenburg und Berlin
60=Sachsen-Anhalt
61=Tiefland Sachsen-Anhalt
62=Harz
70=Thüringen
71=Tiefland Thüringen
72=Mittelgebirge Thüringen
80=Sachsen
81=Tiefland Sachsen
82=Mittelgebirge Sachsen
90=Hessen
91=Nordhessen und hess. Mittelgebirge
92=Rhein-Main
100=Rheinland-Pfalz und Saarland
101=Rhein, Pfalz, Nahe und Mosel
102=Mittelgebirgsbereich Rheinland-Pfalz
103=Saarland
110=Baden-Württemberg
111=Oberrhein und unteres Neckartal
112=Hohenlohe/mittlerer Neckar/Oberschwaben
113=Mittelgebirge Baden-Württemberg
120=Bayern
121=Allgäu/Oberbayern/Bay. Wald
122=Donauniederungen
123=Bayern nördl. der Donau, o. Bayr. Wald, o. Mainfranken
124=Mainfranken

CarstenD

I checked your region (32) and there is indeed no data from DWD. The only region is 31 with data.

Klinge

@Sachse Please excuse me for replying to such an old post. But unfortunately I have the same problem as you had. The module only worked fine for a few days, and now it won’t load the data any more. I have now tried to reproduce your solution. But I unfortunately did not solve it. When I enter “pm2 status” and “netstat -plan|grep 8080”, I get the following output.

pi@raspberrypi:~/MagicMirror/modules $ pm2 status
┌────┬────────────────┬─────────────┬─────────┬─────────┬──────────┬────────┬──────┬───────────┬──────────┬──────────┬──────────┬──────────┐
│ id │ name           │ namespace   │ version │ mode    │ pid      │ uptime │ ↺    │ status    │ cpu      │ mem      │ user     │ watching │
├────┼────────────────┼─────────────┼─────────┼─────────┼──────────┼────────┼──────┼───────────┼──────────┼──────────┼──────────┼──────────┤
│ 0  │ MagicMirror    │ default     │ 2.26.0  │ fork    │ 749      │ 5h     │ 0    │ online    │ 0%       │ 2.6mb    │ pi       │ enabled  │
└────┴────────────────┴─────────────┴─────────┴─────────┴──────────┴────────┴──────┴───────────┴──────────┴──────────┴──────────┴──────────┘
pi@raspberrypi:~/MagicMirror/modules $ netstat -plan|grep 8080
(Es konnten nicht alle Prozesse identifiziert werden; Informationen über
nicht-eigene Processe werden nicht angezeigt; Root kann sie anzeigen.)
tcp6       0      0 ::1:8080                :::*                    LISTEN      838/electron.js
tcp6       0      0 ::1:8080                ::1:46942               TIME_WAIT   -
tcp6       0      0 ::1:8080                ::1:46944               FIN_WAIT2   -
tcp6       0      0 ::1:8080                ::1:44370               VERBUNDEN   838/electron.js
tcp6       0      0 ::1:44370               ::1:8080                VERBUNDEN   941/Electron --shar
tcp6       1      0 ::1:46944               ::1:8080                CLOSE_WAIT  941/Electron --shar

It would be really nice if you could please give me the crucial hint where the problem is now and how it can be solved? :-)

bhepler

@Klinge - It appears that your problem isn’t the same. @Sachse had two instances of the Magic Mirror framework running at the same time. You probably don’t have that problem.

The DWD site appears to be up and is hosting a json file. So let’s start at the beginning. Please post the relevant portion of your config.js file. We don’t need everything, just the part that configures the MMM-DWD-Pollen module. That will let us try and replicate your problem. Be sure to use the Markdown features when you post your code snippet!