MagicMirror not Mirror

PointPubMedia

I think it’s time to show you some pic ;)

I’m using MM as a “HUD” for my home automation project. All the notification from home automation are send to the MM!

I’m using a 42" tv in portrait mode using a RPI3

Both front panel are kind of door so I can open it and go behind the monitor and also behind the lower part where I’m having all the hardware I’m using for the home automation!

Still have some thing to do, like putting some color on the wood to fit the house, probably a little brown like the molding on the ceiling!

Snille

Hi! Looking great! I’m working on something similar but in a Mirror, I see you have a graph on the lower third, what module is that? I’m thinking of integrating my Fibaro to show things like power consumption and other graps… :)

Best regards Snille

PointPubMedia

@Snille said in MagicMirror not Mirror:

Hi! Looking great! I’m working on something similar but in a Mirror, I see you have a graph on the lower third, what module is that? I’m thinking of integrating my Fibaro to show things like power consumption and other graps… :)

Best regards Snille

It’s an iframe module showing a graph from Grafana using data from an energy metering (Z-wave) that get the entire house power consumption!

Snille

Ah! Good to know, so the iframe is the thing to use. :) I have to read up on Grafana, looks nice! What Z-Wave controller do you use?

PointPubMedia

@Snille said in MagicMirror not Mirror:

Ah! Good to know, so the iframe is the thing to use. :) I have to read up on Grafana, looks nice! What Z-Wave controller do you use?

I’m using Vera Plus and Vera Edge just to handle Z-Wave and all others function, like, scene are handle by openLuup!

PointPubMedia

Need some cleanup for the cables and everything but for the moment all the hardware is inside ;)

shashank

@PointPubMedia Even i am using Vera Edge for my Home automation, i wanted use remotecontrol module of MM using Virtual switch or Scene from Vera to restart , monitor OFF, Monitor ON at predefined time using Scenes. Can you help me in this how to use luup code below triggers .
http://192.168.1.2:8080/remote?action=REBOOT
http://192.168.1.2:8080/remote?action=SHUTDOWN
http://192.168.1.2:8080/remote?action=MONITORON
http://192.168.1.2:8080/remote?action=MONITOROFF

PointPubMedia

@shashank said in MagicMirror not Mirror:

@PointPubMedia Even i am using Vera Edge for my Home automation, i wanted use remotecontrol module of MM using Virtual switch or Scene from Vera to restart , monitor OFF, Monitor ON at predefined time using Scenes. Can you help me in this how to use luup code below triggers .
http://192.168.1.2:8080/remote?action=REBOOT
http://192.168.1.2:8080/remote?action=SHUTDOWN
http://192.168.1.2:8080/remote?action=MONITORON
http://192.168.1.2:8080/remote?action=MONITOROFF

I’m using a ZWave power outlet instead to control the monitor ON/OFF using motion sensor in the house.
But if you still want to play with remotecontrol, you can use some LUA code in a scene!

foppa

I have this code in My Vera Plus and Teo scenes, on, off etc.

local http = require(“socket.http”)

– 5 Second timeout
http.TIMEOUT = 1

– The return parameters are in a different order from luup.inet.wget(…)
result, status = http.request(“http://192.168.2.41:8080/remote?action=MONITOROFF”)

@PointPubMedia

PointPubMedia

@foppa

I’m using http request in my LUA like that

local status,result = luup.inet.wget(“http://10.99.99.15:8080/TESTING”")

I also have a URLENCODE function to convert my string…

function urlencode(str)
   if (str) then
      str = string.gsub (str, "\n", "\r\n")
      str = string.gsub (str, "([^%w ])",
         function (c) return string.format ("%%%02X", string.byte(c)) end)
      str = string.gsub (str, " ", "%%20")
   end
   return str
end