MagicMirror not Mirror

PointPubMedia

Ah! Good to know, so the iframe is the thing to use. :) I have to read up on Grafana, looks nice! What Z-Wave controller do you use?

I’m using Vera Plus and Vera Edge just to handle Z-Wave and all others function, like, scene are handle by openLuup!

PointPubMedia

Need some cleanup for the cables and everything but for the moment all the hardware is inside ;)

shashank

@PointPubMedia Even i am using Vera Edge for my Home automation, i wanted use remotecontrol module of MM using Virtual switch or Scene from Vera to restart , monitor OFF, Monitor ON at predefined time using Scenes. Can you help me in this how to use luup code below triggers .
http://192.168.1.2:8080/remote?action=REBOOT
http://192.168.1.2:8080/remote?action=SHUTDOWN
http://192.168.1.2:8080/remote?action=MONITORON
http://192.168.1.2:8080/remote?action=MONITOROFF

PointPubMedia

@shashank said in MagicMirror not Mirror:

@PointPubMedia Even i am using Vera Edge for my Home automation, i wanted use remotecontrol module of MM using Virtual switch or Scene from Vera to restart , monitor OFF, Monitor ON at predefined time using Scenes. Can you help me in this how to use luup code below triggers .
http://192.168.1.2:8080/remote?action=REBOOT
http://192.168.1.2:8080/remote?action=SHUTDOWN
http://192.168.1.2:8080/remote?action=MONITORON
http://192.168.1.2:8080/remote?action=MONITOROFF

I’m using a ZWave power outlet instead to control the monitor ON/OFF using motion sensor in the house.
But if you still want to play with remotecontrol, you can use some LUA code in a scene!

foppa

I have this code in My Vera Plus and Teo scenes, on, off etc.

local http = require(“socket.http”)

– 5 Second timeout
http.TIMEOUT = 1

– The return parameters are in a different order from luup.inet.wget(…)
result, status = http.request(“http://192.168.2.41:8080/remote?action=MONITOROFF”)

@PointPubMedia

PointPubMedia

@foppa

I’m using http request in my LUA like that

local status,result = luup.inet.wget(“http://10.99.99.15:8080/TESTING”")

I also have a URLENCODE function to convert my string…

function urlencode(str)
   if (str) then
      str = string.gsub (str, "\n", "\r\n")
      str = string.gsub (str, "([^%w ])",
         function (c) return string.format ("%%%02X", string.byte(c)) end)
      str = string.gsub (str, " ", "%%20")
   end
   return str
end