MMM-Netatmo does not load

Laz

@CFenner Unfortunately, I now work remotely through VNC with a mirror, the resolution is not very high and all small details are not always clear. I will check the translation in April, as I will be in that city.
Thank you, I am waiting for a recount to other pressure units.!)

Laz

I noticed that the module displays the wrong wind values from the wind sensor on the mirror. The display of speed, wind gust and wind direction is not correct… ((The display of data on the mirror from the wind sensor does not match the data in the Netatmo application and in the Netatmo personal account.

Laz

@CFenner
I noticed that the module displays the wrong wind values from the wind sensor on the mirror. The display of speed, wind gust and wind direction is not correct… ((The display of data on the mirror from the wind sensor does not match the data in the Netatmo application and in the Netatmo personal account.

sil3ntstorm

I first used another Netatmo module, but it hasn’t been updated for 4 years. I now want to use this one, but I don’t know exactly how to create the netatmo refresh token?
Are there instructions for this?

Can someone show the module settings here so that the data is displayed exactly like this:

preview.bubbles.png

CFenner

@sil3ntstorm you get the token now directly from the developer portal, see https://github.com/CFenner/MMM-Netatmo?tab=readme-ov-file#connection-to-netatmo-service-api

sil3ntstorm

@CFenner

Thanks, it seems to be working now, but I can’t find this setting so that the rooms are displayed one below the other. These are displayed one below the other, even if I enter false for horizontal:

{

  module: 'netatmo',

  position: 'bottom_left', // the location where the module should be displayed

  header: 'Netatmo', // a header if you like one

  config: {

    clientId: 'secret123', // your app id

    clientSecret: 'secret123', // your app secret

    refresh_token: 'secret123', // your generated refresh token   

    refreshInterval: '3',  

    dataOrder: ["Noise","Pressure","CO2","Humidity","Temperature","Rain"],

    design: 'bubbles',

    horizontal: 'true',

    showBattery: 'true',

    showWiFi: 'true',   

    showTrend: 'true',

    showMeasurementIcon: 'true',

    showStationName: 'true',

    showModuleNameOnTop: 'false',

    fontClassModuleName: 'xsmall',

    fontClassPrimary: 'xsmall',

    fontClassSecondary: 'xsmall',

    fontClassMeasurement: 'xsmall',

    thresholdCO2Average: '1200',

    thresholdCO2Bad: '1800',

 
  }

},

Laz

@sil3ntstorm

sil3ntstorm

This post is deleted!

Laz

@CFenner Good afternoon! I am still waiting for the decision to recalculate in mm Hg.
And tell me how to fix the wrong display of the wind direction?

Lusbueb

@tommys in history the moduleOrder was like this:

moduleOrder: ["Outdoor", "Regen", "Wind", "Schlafzimmer", "Wohnzimmer"]

but in newer versions the code has a new variable called showStationName and as default it is set to true. Now set this to false or expand the moduleOrder like this StationName - Module

moduleOrder: ["im Fritz - Outdoor","im Fritz - Regen","im Fritz - Schlafzimmer","im Fritz - Wohnzimmer"]

this solved my Problem Netatmo load without errors but shows nothing (blank screen)

good luck, Peter