Read the statement by Michael Teeuw here.
MMM-CalDAV
-
@sdetweil im running the “container manager” on the nas and the container by bastilimbach installation guide by https://mariushosting.com/how-to-install-magicmirror-on-your-synology-nas/
-
@sdetweil i used ipv64 to receive a certificate - but for now i dont want to get any caldav from outside or do i missunderstand something?
-
@caw said in MMM-CalDAV:
bastilimbach
that image is 4 years old, so not running the latest node or MM…
the install doc https://docs.magicmirror.builders/getting-started/installation.html#alternative-installation-methods
references this docker image
https://gitlab.com/khassel/magicmirror -
@caw because the ics generated by MMM-Caldav is only needed on this same machine I would use
http://localhost:mmport/CALDAV
in the calendar module.
I am guessing your cert is connected to your internet IP address (ISP router)
which is then port forwarded to the MM machine…this is an external (from MM’s perspective) request
MM is configured (be default) to be a closed system on the wall, not allowing any external systems to request the MM page (external means outside the machine MM is running on)
-
@sdetweil i searched for a guide to get the Khassel container running on a Synology NAS but didn’t found anything about it. I tried it by my own but did not work. Do you have a clue how to get it on the Docker on a Synology NAS?
-
@caw my older 416j only has 512mb storage, not enough room to run docker things
but docker is docker. i thought he specified a compose or command line
see this
https://forum.magicmirror.builders/topic/18952/docker-install-on-synology-nas -
so i got the khassel image running and i think the calendars are found but i get an error:
[2024-09-05 22:42:56.488] [ERROR] Error: EACCES: permission denied, open ‘/opt/magic_mirror/modules/MMM-CalDAV/service/.SYNOLOGY_Familien_20Kalender.ics’
2024/09/05 22:42:56 stderr [2024-09-05 22:42:56.486] [ERROR] Whoops! There was an uncaught exception…do you have a clue how to fix this? im irritated by the “20” between Familien_20Kalender.ics thats no part of the calendar name…
-
@caw 20 is typically part of a name with a space in it, %20
also you have a . (dot) in front of SYNOLOGY_
-
and do you have any clue where the misstake is? and how can i fix it?
-
@caw i am going to guess
remove the dot in front of SYNOLOGY
and in the MagicMirror config mke sure there is a space where you see the 20, or make it %20one change at a time
