MMM-CalendarExt3 not showing events on calendar, but does on list after 2.30 update

[sdetweil]

@tke499

did you try to do npm install again in the ext 3 folder

on the last two of my command scripts

upgrade without the apply parm is just a test, no changes

upgrade WITH apply and already on the same release will do nothing

upgrade with force will redo upgrade over same version

install will not install over an existing system

so they both did nothing

[tke499]

@sdetweil I deleted and re-installed Ext3, no change.

[sdetweil]

@tke499 can you look at the output of npm start for the cal broadcast message

[sdetweil]

@tke499 also ext3 is done all in browser.

can you open the developer window, ctrl-shift-i,
select the console tab, put ext in the filter field

[tke499]

@sdetweil

What are you asking for? I am still learning. Thanks

[tke499]

@sdetweil This is everything that is showing up when I run MM

magicmirror@2.30.0 start
npm run start:x11

magicmirror@2.30.0 start:x11
DISPLAY=“${DISPLAY:=:0}” ./node_modules/.bin/electron js/electron.js

[2025-01-01 20:24:29.256] [LOG] Starting MagicMirror: v2.30.0
[2025-01-01 20:24:29.289] [LOG] Loading config …
[2025-01-01 20:24:29.294] [LOG] config template file not exists, no envsubst
[2025-01-01 20:24:29.834] [INFO] Checking config file /home/robert/MagicMirror/config/config.js …
[2025-01-01 20:24:29.926] [INFO] Your configuration file doesn’t contain syntax errors :)
[2025-01-01 20:24:29.927] [INFO] Checking modules structure configuration …
[2025-01-01 20:24:30.058] [INFO] Your modules structure configuration doesn’t contain errors :)
[2025-01-01 20:24:30.061] [LOG] Loading module helpers …
[2025-01-01 20:24:30.062] [LOG] No helper found for module: alert.
[2025-01-01 20:24:30.069] [LOG] Initializing new module helper …
[2025-01-01 20:24:30.070] [LOG] Module helper loaded: updatenotification
[2025-01-01 20:24:30.071] [LOG] No helper found for module: clock.
[2025-01-01 20:24:30.214] [LOG] Initializing new module helper …
[2025-01-01 20:24:30.214] [LOG] Module helper loaded: calendar
[2025-01-01 20:24:30.216] [LOG] No helper found for module: weather.
[2025-01-01 20:24:30.216] [LOG] No helper found for module: MMM-Traffic.
[2025-01-01 20:24:30.252] [LOG] Initializing new module helper …
[2025-01-01 20:24:30.252] [LOG] Module helper loaded: mmm-nest-status
[2025-01-01 20:24:30.363] [LOG] Initializing new module helper …
[2025-01-01 20:24:30.363] [LOG] Module helper loaded: newsfeed
[2025-01-01 20:24:30.364] [LOG] No helper found for module: MMM-CalendarExt3.
[2025-01-01 20:24:30.364] [LOG] All module helpers loaded.
[2025-01-01 20:24:30.389] [LOG] Starting server on port 8080 …
[2025-01-01 20:24:31.322] [LOG] Server started …
[2025-01-01 20:24:31.323] [LOG] Connecting socket for: updatenotification
[2025-01-01 20:24:31.324] [LOG] Starting module helper: updatenotification
[2025-01-01 20:24:31.325] [LOG] Connecting socket for: calendar
[2025-01-01 20:24:31.326] [LOG] Starting node helper for: calendar
[2025-01-01 20:24:31.327] [LOG] Connecting socket for: mmm-nest-status
[2025-01-01 20:24:31.328] [LOG] Starting node_helper for module [mmm-nest-status]
[2025-01-01 20:24:31.329] [LOG] Connecting socket for: newsfeed
[2025-01-01 20:24:31.331] [LOG] Starting node helper for: newsfeed
[2025-01-01 20:24:31.332] [LOG] Sockets connected & modules started …
[2025-01-01 20:24:31.694] [LOG] Launching application.
[2025-01-01 20:24:32.841] [INFO] System information:

SYSTEM: manufacturer: ; model: ; virtual: false

OS: platform: linux; distro: Debian GNU/Linux; release: 12; arch: arm64; kernel: 6.6.62+rpt-rpi-v8

VERSIONS: electron: 32.2.7; used node: 22.12.0; installed node: 22.12.0; npm: 10.9.0; pm2: 5.4.3

OTHER: timeZone: America/New_York; ELECTRON_ENABLE_GPU: undefined

[4696:0101/202433.175100:ERROR:gbm_wrapper.cc(74)] Failed to get fd for plane.: No such file or directory (2)
[4696:0101/202433.175511:ERROR:gbm_wrapper.cc(257)] Failed to export buffer to dma_buf: No such file or directory (2)
[4696:0101/202433.175885:ERROR:gbm_wrapper.cc(74)] Failed to get fd for plane.: No such file or directory (2)
[4696:0101/202433.176005:ERROR:gbm_wrapper.cc(257)] Failed to export buffer to dma_buf: No such file or directory (2)
[4696:0101/202433.176180:ERROR:gbm_wrapper.cc(74)] Failed to get fd for plane.: No such file or directory (2)
[4696:0101/202433.176283:ERROR:gbm_wrapper.cc(257)] Failed to export buffer to dma_buf: No such file or directory (2)
[4696:0101/202433.176443:ERROR:gbm_wrapper.cc(74)] Failed to get fd for plane.: No such file or directory (2)
[4696:0101/202433.176539:ERROR:gbm_wrapper.cc(257)] Failed to export buffer to dma_buf: No such file or directory (2)
[4696:0101/202433.176688:ERROR:gbm_wrapper.cc(74)] Failed to get fd for plane.: No such file or directory (2)
[4696:0101/202433.176787:ERROR:gbm_wrapper.cc(257)] Failed to export buffer to dma_buf: No such file or directory (2)
[4696:0101/202433.176939:ERROR:gbm_wrapper.cc(74)] Failed to get fd for plane.: No such file or directory (2)
[4696:0101/202433.177033:ERROR:gbm_wrapper.cc(257)] Failed to export buffer to dma_buf: No such file or directory (2)
[4696:0101/202433.177181:ERROR:gbm_wrapper.cc(74)] Failed to get fd for plane.: No such file or directory (2)
[4696:0101/202433.177270:ERROR:gbm_wrapper.cc(257)] Failed to export buffer to dma_buf: No such file or directory (2)
[4696:0101/202433.178472:ERROR:gbm_wrapper.cc(74)] Failed to get fd for plane.: No such file or directory (2)
[4696:0101/202433.178599:ERROR:gbm_wrapper.cc(257)] Failed to export buffer to dma_buf: No such file or directory (2)
[4696:0101/202433.178765:ERROR:gbm_wrapper.cc(74)] Failed to get fd for plane.: No such file or directory (2)
[4696:0101/202433.178886:ERROR:gbm_wrapper.cc(257)] Failed to export buffer to dma_buf: No such file or directory (2)
[4696:0101/202433.179046:ERROR:gbm_wrapper.cc(74)] Failed to get fd for plane.: No such file or directory (2)
[4696:0101/202433.179135:ERROR:gbm_wrapper.cc(257)] Failed to export buffer to dma_buf: No such file or directory (2)
[4696:0101/202433.179281:ERROR:gbm_wrapper.cc(74)] Failed to get fd for plane.: No such file or directory (2)
[4696:0101/202433.179369:ERROR:gbm_wrapper.cc(257)] Failed to export buffer to dma_buf: No such file or directory (2)
[4696:0101/202433.179516:ERROR:gbm_wrapper.cc(74)] Failed to get fd for plane.: No such file or directory (2)
[4696:0101/202433.179604:ERROR:gbm_wrapper.cc(257)] Failed to export buffer to dma_buf: No such file or directory (2)
[4696:0101/202433.179750:ERROR:gbm_wrapper.cc(74)] Failed to get fd for plane.: No such file or directory (2)
[4696:0101/202433.179876:ERROR:gbm_wrapper.cc(257)] Failed to export buffer to dma_buf: No such file or directory (2)
[4696:0101/202433.180031:ERROR:gbm_wrapper.cc(74)] Failed to get fd for plane.: No such file or directory (2)
[4696:0101/202433.180119:ERROR:gbm_wrapper.cc(257)] Failed to export buffer to dma_buf: No such file or directory (2)
[2025-01-01 20:24:34.889] [LOG] Create new calendarfetcher for url: http://p159-caldav.icloud.com/published/2/Mjc5OTI2NzkxMjc5OTI2N_OGitwGbVHoaRgKm45s40567NS6ia83VwuU3ZKztGC0 - Interval: 300000
[2025-01-01 20:24:34.932] [LOG] Create new newsfetcher for url: https://moxie.foxnews.com/google-publisher/latest.xml - Interval: 300000
[2025-01-01 20:24:35.001] [INFO] updatenotification: Updater Class Loaded!
[2025-01-01 20:24:35.002] [INFO] updatenotification: Checking PM2 using…
[2025-01-01 20:24:35.003] [INFO] updatenotification: [PM2] You are not using pm2
[2025-01-01 20:24:35.004] [INFO] Checking git for module: MMM-Traffic
[2025-01-01 20:24:35.029] [INFO] Checking git for module: mmm-nest-status
[2025-01-01 20:24:35.073] [INFO] Checking git for module: MMM-CalendarExt3
[2025-01-01 20:24:35.203] [INFO] Checking git for module: MagicMirror
[2025-01-01 20:24:36.256] [INFO] Calendar-Fetcher: Broadcasting 128 events from .
[2025-01-01 20:24:36.467] [INFO] Newsfeed-Fetcher: Broadcasting 25 items.
[4587:0101/202451.558237:ERROR:CONSOLE(1)] “Request Autofill.enable failed. {“code”:-32601,“message”:”‘Autofill.enable’ wasn’t found"}“, source: devtools://devtools/bundled/core/protocol_client/protocol_client.js (1)
[4587:0101/202451.558687:ERROR:CONSOLE(1)] “Request Autofill.setAddresses failed. {“code”:-32601,“message”:”‘Autofill.setAddresses’ wasn’t found”}", source: devtools://devtools/bundled/core/protocol_client/protocol_client.js (1)
[4587:0101/202533.885618:ERROR:CONSOLE(1)] “Uncaught (in promise) SyntaxError: Unexpected token ‘H’, “HTTP/1.1 4”… is not valid JSON”, source: devtools://devtools/bundled/devtools_app.html?remoteBase=https://chrome-devtools-frontend.appspot.com/serve_file/@6cd35584827031630286f7d1b4c986f9ebd175df/&can_dock=true&toolbarColor=rgba(223,223,223,1)&textColor=rgba(0,0,0,1)&experiments=true (1)
[2025-01-01 20:29:36.818] [INFO] Calendar-Fetcher: Broadcasting 128 events from http://p159-.
[2025-01-01 20:29:37.507] [INFO] Newsfeed-Fetcher: Broadcasting 25 items.
[2025-01-01 20:31:34.526] [LOG] Shutting down server…
[2025-01-01 20:31:34.528] [LOG] Stopping module helper: updatenotification
[2025-01-01 20:31:34.529] [LOG] Stopping module helper: calendar
[2025-01-01 20:31:34.529] [LOG] Stopping module helper: mmm-nest-status
[2025-01-01 20:31:34.530] [LOG] Stopping module helper: newsfeed
[2025-01-01 20:31:34.531] [LOG] Node_helpers stopped …

[tke499]

@sdetweil This is what I get in the console

[sdetweil]

@tke499 calendar is broadcasting, so that’s not it

[MMRIZE]

@tke499

Generally,

This message is just an warning can be ignored.
However, in practice, stopping at that point usually corresponds to the following cases:

1. (Most common case): The CX3 module has not been properly installed. In most situations, this happens because the CX3_Shared library is not correctly installed. To resolve this, navigate to the CX3 directory, run git pull, and then execute npm install. This resolves most issues. If it doesn’t, simply delete the entire CX3 directory and reinstall it. It only takes about 15 seconds.

2. In very rare cases, other modules may cause errors during DOM creation, which can have an impact. However, this is highly uncommon, so the cause is typically case 1.

[tke499]

@MMRIZE I have re-installed CX3 3 times now. Still having the same issue

[tke499]

@MMRIZE I only have 2 other modules installed, one for nest and the other for traffic.

[MMRIZE]

@tke499
Send me your ics file or url. (eouia0819@gmail.com)

[sdetweil]

@tke499 what is the settings in the default calendar,
xxx out your url

set :maximumEvents:100,

[tke499]

@sdetweil I set it to 100. The events now show up, but low the list on the side goes to the bottom of the screen. Not the desired effect.

[sdetweil]

@tke499 use limitdays

there are 50 knobs to adjust

[sdetweil]

@tke499 you can try maximumEvents:12 or 15

there is also a way with css. i will test and document in a little while

this should hide more than 10 events in the default calendar
in custom.css

.calendar table tr:nth-child(n+10) {
  display: none;
}

[sdetweil]

@tke499 I have confirmed the css approach works…
in ~/MagicMirror/css/.custom.css

.calendar table tr:nth-child(n+10) {  /* 10 is the number of rows you want showing */  
          display: none;
}

I have maximumEvents:200
and only 10 lines show with the css posted
without it, it goes to the bottom of the screen

[Niggich]

@sdetweil thx this is working for me, but now the events doesn’t fade out… any solution?

[tke499]

@sdetweil this works, just no fade. Thanks

[sdetweil]

@tke499 yeh, fade is calculated based on the size of the list (200 in my case)
and the fade starts at 100, oops… cut off at 10…

fadepoint can get you a different start spot, BUT, its also changes the amount of fade (start at .02 (4 =line 4) BUT there are 196 steps in the fade, so I don’t see much…

looking thru the code, I don’t see any difference in the event broadcast