MMM-CalendarExt3

[sdetweil]

@p1lspeda i would start with commenting out the calendarSet:null

[p1lspeda]

@sdetweil
thanks for the help.
Did that - no change.
Same problem and I have no idea where to start an look

Edit: HA ! I decreased the refreshIntervall and it seems as that did the trick - I could have probably just waited 30min (but I’m impatient)

[sdetweil]

@p1lspeda ok. nice work.
Ext3 attempts to not flash the screen on every update. the individual calendar data arrive at different times

so the waitFetch value is used to decide when to display initially, and refreshInterval after that

waitFetch defaults to 5 seconds

so this means some data arrived after 5 seconds (waitFetch)

[p1lspeda]

Re: MMM-CalendarExt3

Next (easy) question:
My CX3 module doesn’t have symmetrical borders (left & right), i.e. the left border is smaller than the right border.
I want to maximize the width or at least have symmetrical borders.
Border = distance between module edge and display edge
See the screenshot:

How can I adjust these in my custom.css ?
My custom.css includes

body {
        margin: 10px;
        position: absolute;
        height: calc(100% - 30px);
        width: calc(100% - 30px);
}

A hint/clue/idea would be very much appreciated.
Thanks !

[sdetweil]

@p1lspeda we already set margins and borders
see css/main.css

sounds like your 7 day width is not symmetrical to the position the module is in

CX3 has extensive classes that should allow you to position it properly

also your css entry whacks the entire page, not just your module config.

see the position layout in the doc here

html is typically reading anchored left for ltr langusgrd abd right for rtl langusges, so you should br able to increase the left edge number to shift the whole image right

.CX3 {
   left:20px;
}

this left is relative to its configured position

[p1lspeda]

@sdetweil Thanks for pointing me in the right direction.
Seems I need to play around with css.

[sdetweil]

@p1lspeda see the second link below in my signature for using the developers window elements tan

[gonzonia]

I just did a new build of my MM to upgrade to Bookworm and update to no longer use unsupported modules. Everything went well for the most part except my calendars aren’t showing. This is in the Error log from start up -

[2025-02-17 11:56:43.570] [WARN]  [MMM-CalendarExt3.js:390:11] [CX3] Module is not prepared yet, wait a while. 
[2025-02-17 11:56:43.576] [WARN]  [MMM-CalendarExt3.js:390:11] [CX3] Module is not prepared yet, wait a while. 
[2025-02-17 11:56:43.668] [WARN]  [MMM-CalendarExt3Agenda.js:186:11] [CX3A] Module is not prepared yet, wait a while. 
[2025-02-17 11:56:43.673] [WARN]  [MMM-CalendarExt3Agenda.js:186:11] [CX3A] Module is not prepared yet, wait a while. 
[2025-02-17 11:56:43.690] [WARN]  [MMM-CalendarExt3Agenda.js:186:11] [CX3A] Module is not prepared yet, wait a while. 

I can see in the main log that the Calendar module is getting data -

[2025-02-17 17:12:47.050] [INFO]  Calendar-Fetcher: Broadcasting 584 events from https://calendar.google.com/calendar/ical/XXXXXXX/basic.ics. 
[2025-02-17 17:12:47.215] [INFO]  [calendar.js:699:7] sorting events count=130 
[2025-02-17 17:12:47.297] [INFO]  [calendar.js:699:7] sorting events count=112 
[2025-02-17 17:12:47.309] [INFO]  [calendar.js:739:7] slicing events total maxcount=10 

I’ve tried the

git submodule update --init --recursive

from the install instructions and it didn’t seem to help. Thoughts?

[sdetweil]

@gonzonia if you installed MagicMirror 2.30
did you also install the fix?

https://forum.magicmirror.builders/topic/19282/version-2-30-0-calendar-fix-for-clipping-broadcast-events?page=7

[gonzonia]

@sdetweil No. I had not seen that. Installing now. Thanks!