Mirror Freezing

[sdetweil]

@plainbroke you can

sudo kill -9 pid

but i dont know what functions are in what process, electron decides that. one is the page/tab

[plainbroke]

@sdetweil
Just did a kill 1998 and it is now not showing up but the mirror is still working,
I guess I will wait until one of the modules doesn’t work anymore.
Then i will know which one to remove, right?
Turns out that was the wireless connection I think.
MM stopped and I can not access it through ssh time to POPO.
I will keep after this but I will also stop globe in the config.js. just to see if that helps.
Thanks for your help I have learned alot tonight about the way debian and MM run.

[sdetweil]

@plainbroke i think page switching while globe is drawing
is probably the cause

[freelancerakash]

@plainbroke this is the best Answer

[plainbroke]

@sdetweil
Not so sure that it was globe came home today and the same screen was stopped,
MMM-Dogs and the time was the same 3:37 pm but the real time was 4:30 pm.
So re-enabled globe and disabled MMM-Dogs to see if it does it again tomorrow…
I am almost wondering if it isn’t something to do with MMM-birthday-paged.
It was the last module I remember adding since this started.
I will slowly figure it out by disabling one module at a time that seems to hog resources.

By the way what do it mean by zombie in top.?

top - 16:53:44 up 17 min,  3 users,  load average: 5.34, 5.15, 3.71
Tasks: 222 total,   3 running, 218 sleeping,   0 stopped,   1 zombie
%Cpu(s): 77.3 us, 12.1 sy,  0.0 ni, 10.6 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   7820.9 total,   4021.5 free,   1923.3 used,   2830.4 buff/cache
MiB Swap:    512.0 total,    512.0 free,      0.0 used.   5897.6 avail Mem

[karsten13]

@plainbroke

see e.g. https://www.baeldung.com/linux/clean-zombie-process

[sdetweil]

@plainbroke

[sdetweil]

@plainbroke i think most often is the parent dies but the child was still running…

[plainbroke]

@sdetweil @karsten13
Found It

ps ux | awk '{if($8=="Z") print}'
pi          1170  0.0  0.0      0     0 ?        Z    16:36   0:00 [xsettingsd] <defunct>

What is xsettingsd?
Should x11 be running with wayland ?
Seems like a duplicated background app running or do they not do basically the same thing.?

I did kill the 1166 which turned out to be the parent of the 1170 xsettingsd
Mirror restarted I assume due to PM2 being involved.
It restarted MUCH faster than normal. The MMM-Snow is running smoother.
I guess only time will tell.