not able to profileswitch/schedule LocalTransport module

[Jopyth]

@dfuerst @tosti007 Ok, turns out I made a mistake with my notifications. It is now working with all modules I want it to work. Maybe I can check Localtransport tomorrow.

[tosti007]

@dfuerst Unfortunately I did not have as much time this weekend as I hoped it would have. However @Jopyth came up with a fix that should solve this. (Thank you @Jopyth) Pull the new changes and your problem should be solved :D

Edit: I gave it a quick test and it seems to be working fine!

[dfuerst]

did a “git pull”, now it isn’t working anymore at all. (no action after button longpress)
do i have to do something special after a git pull?

[dfuerst]

because the new version didn’t work anymore i reinstalled VERSION 2 from your REPO:
now its working again , of course not hiding the localtransport module.
any ideas why this version starts upon button press and the 8hours old one not?

[tosti007]

@dfuerst hmm, ouch. First of all sorry for the inconvenience. If you have the most up-to-date version set useLockStrings to false does it work like the original version 2?

[dfuerst]

@tosti007 it did nothing.

[dfuerst]

i mean, the newest version did nothing.
after copying the code of the previous version into the .js file it worked again, of course not hiding localtransport.

many thanks for your effort

[tosti007]

@dfuerst that’s unfortunate. There is another problem currently going on, since I used code that isn’t supported on all browsers. My first thought now is that it might be related. I will fix this soon and hope that this was the issue. What browser are you using?

[dfuerst]

@tosti007 i use a RPi3 with standard Raspbian.
i always test via “pm2 start mm”

[tosti007]

@dfuerst I fixed that backwards compatibility, but this does unfortunatly not solve the problem (tested it). I did found the reason why it doesn’t work, however I do not have a quickfix for this. I will look at it in the following days after doing some research.