MMM-NetworkScanner

zdenek

@Mykle1 I also agree with @zeular but to increase KeepAlive (actually I´ve 5 minutes) will not give me accurate information. If person leaves, the system will give me wrong info for longer time). And as I said - weird is that to run Fing o iPad/iPhone and MyNet on Mac detects iPhone of my wife even module says she is offline. This module is perfect for me - when I came home I can immediately check, who is at home (I´ve quiet more kids than it´s common, so will be nice to know, who of them is at home) - so to get it works as good as possible is what I want…

zeular

@Mykle1 said in MMM-NetworkScanner:

@zeular said in MMM-NetworkScanner:

But I would really like to hide devices that are not logged in, so you can > add other friends and family who do not need to be visible all the time.

I would like that, too, but that is out of my hands. You could post an option request to the author. I understand he is away at the moment. Or, better still, you could fork the repo and develop that feature yourself. Then send a pull request to the author and he might add it permanently to the module.

I wish a could develop it my self… But I’m too bad at this. :)

Mykle1

@zdenek said in MMM-NetworkScanner:

so to get it works as good as possible is what I want…

Well, knowing what we know about the phones, you could try disabling the power-saving feature on them so that their wifi doesn’t drop off the network. This way NetworkScanner won’t “lose” them, theoretically. However, you’ll likely see huge battery loss on the phones.

Mykle1

@zeular said in MMM-NetworkScanner:

I wish a could develop it my self… But I’m too bad at this.

You never know until you try

zeular

@Mykle1 said in MMM-NetworkScanner:

Well, knowing what we know about the phones, you could try disabling the power-saving feature on them so that their wifi doesn’t drop off the network. This way NetworkScanner won’t “lose” them, theoretically. However, you’ll likely see huge battery loss on the phones.

I have that disabled on my phone (Galaxy S7) and it didn’t work. Maybe it has something to do with the ARP on the PI, I cant see all of my things in ARP that is on my network either. Maybe you shouldn’t?

@Mykle1 said in MMM-NetworkScanner:

You never know until you try

I have tried… Didn’t go well… ;)

ianperrin

Hi all

Really sorry about the lack of progress/development on this module. I’ve been consumed by renovations at home and starting a new job.

There are clearly still issues with the module. Unfortunately I am not going to be able to look into them for some time yet. So, if there is someone who can pick up the baton and submit a pull request that would be great.

Ian

Hein-Jan

Hi,

I’am pleased with the module as it is, I just can’t seem to get the keepAlive working.

Part of my config:

{
			module: 'MMM-NetworkScanner',
			position: 'bottom_left',
			config: {
				devices: [
					{macAddress: "xx:xx:xx:xx:xx:xx", name: "Kleine iPad", icon:"mobile"},
					{macAddress: " xx:xx:xx:xx:xx:xx ", name: "Telefoon Hein-Jan", icon:"android"},
					{macAddress: " xx:xx:xx:xx:xx:xx ", name: "iPhone Nicole", icon:"phone"},
					{macAddress: " xx:xx:xx:xx:xx:xx ", name: "iPad Nicole werk", icon:"apple"},
					{macAddress: " xx:xx:xx:xx:xx:xx ", name: "Tesla", icon:"car"},
					{macAddress: " xx:xx:xx:xx:xx:xx ", name: "Grote iPad", icon:"tablet"},
					{macAddress: " xx:xx:xx:xx:xx:xx ", name: "iPhone Hein-Jan", icon:"phone-square"},
				],
				showUnknown: false,
				keepAlive: 300,
				showLastSeen: false
			}
		}

The keepAlive is in there, but if a device is detected (highlighted), it also “disappears” (un-highlighted) in aprox 5 seconds.
I was under the impression that the keep alive would keep it highlighted (alive) for at least 300 seconds (5 minutes).
Is my understanding wrong?

Kind regards,

Hein-Jan

Mykle1

@Hein-Jan said in MMM-NetworkScanner:

Is my understanding wrong?

No, it’s not. I had the same problem when I was using MAC addresses instead of IP addresses. Also, I’m behind one or two commits on the version. Once I had it working to my liking I stopped updating it. I’ve had no trouble with it since.

{
	disabled: f,
        module: 'MMM-NetworkScanner',
        position: 'top_left', 
        config: {
		debug: false,
            	devices: [
                    	{ ipAddress: "192.168.1.2", name: "Dove", icon: "medkit"},
			{ ipAddress: "192.168.1.15", name: "BabyJesus", icon: "futbol-o"},
                    	{ ipAddress: "192.168.1.8", name: "BottlePop", icon: "globe"},
                    	{ ipAddress: "192.168.1.11", name: "Donna", icon: "venus"},
			{ ipAddress: "192.168.1.10", name: "Nikki", icon: "coffee"},
			{ ipAddress: "192.168.1.7", name: "Jason", icon: "fire-extinguisher"},
			{ ipAddress: "192.168.1.18", name: "MJD", icon: "child"}
                		],
            	showUnknown: false,
            	showOffline: true,
		showLastSeen: false,
            	keepAlive: 1200, // in seconds (20 min)
            	updateInterval: 30, // in seconds
            	residents: []
		}        
 	},

amanzimdwini

After a few hours of having fun with this module (wanted to track phones vs MAC), here is what finally worked for ME:
I added one “dummy” IP address (eg of my home NAS). Once the program saw the IP address, it also found all the MAC addresses.

NO idea why, so don’t knock this. Banged my head against it for hours.
[then again, maybe the black cat I sacrificed helped too]

Anyway, that’s my 2c.

K

Mykle1

@amanzimdwini said in MMM-NetworkScanner:

maybe the black cat I sacrificed helped too

Good one!