MMM-Memo - Add some memos on your page and manage them through HTTP request

ceddirr

Riiight, thank you very much! :D

ceddirr

Hi all,

Thank you again for your answer last time, playing with the option display_time from the alert module.

However, if you modify it, every alert would be modified. For exemple, if I want to set my memo to keep displayed for at least 30 secondes, I go modify the display_time from the alert module. But, all alerts like for example “welcome back Mr Blabla” when I switch profile will stay longer than usual.

The question is how do I have to do to only change the MMM-Memo alerts please?
Many thanks,
Cedric ;)

schnibel

Hi guys,
Just came back on the Internet, and I saw your messages.
@ceddirr, I’m sorry, but I didn’t develop a specific module for alerts as the existing one is quite nice… But I understand your problem.
When I had this DisplayMemo option, the idea was to temporarily display a long message, is it your case ?

ceddirr

Hi, thank you for getting back to me =)

Yes, the idea is basically the same, but I would just like to see the memo a little bit longer than the regular alert’s configuration.
The problem for me is if I change the display_time setting directly on the alert module, it would be too long for the other alert like “nice to see you %profile%”, etc lol

strawberry 3.141

@schnibel easiest soluton would be to replace notifications with alerts, as they can have a duration parameter, but the downside is there can be just one alert per module at the same time.

https://github.com/schnibel/MMM-Memo/blob/master/MMM-Memo.js#L123

to this.sendNotification("SHOW_ALERT", {title: ttl, message: msg, timer: 5000}); for 5 seconds or make a config option for it

wireshark

This post is deleted!

dsegel

@wireshark Try something like this in your ~/MagicMirror/css/custom.css file:

.MMM-Memo .note {
    font-size: 25px;
    font-family: "Roboto Condensed", sans-serif;
}

Note that I just picked that size (25px) out of the air; I have no idea what the default size is. You’ll have to experiment. Also not sure if the size option will even work (although I know the font-family option does).

Vauxdvihl

@schnibel
Thanks for this great module.
Can you please help me?
Unfortunately i am not able to run is (and i am sure that the prob sits in front of the pi)
It would help me a lot if somebody could share his working config (only the “alert” module" and from this "Memo one).
Thanks a lot for you help and support

wireshark

This post is deleted!

nobita

@schnibel , If I would like to make this module without use voice command (Jarvis)
and add event by manual (like default calendar module), or add event in google calendar

question: How to do it? Thanks for your help

efl23

Thanks for this great module.
but when I do this command “http://192.168.0.60:8080/AddMemo?memoTitle=SHOPPING&item=Fruits&level=INFO”, I have this message
“Cannot GET /AddMemo”
but this command “http://192.168.0.60:8080” show MagicMirror
Can you please help me?
Thanks a lot for you help and support

efl23

@efl23
Eureka, just a bad name of the module

Janne

Hi,

Just a help to other magic Mirror builders.

I have implemented this nice module. :smiling_face_with_heart-eyes:

When I send URL-request I got the error “No memo file found”. After some grumbling and deep dive I found that it was because my language was not supported (Danish).

I added my language-file under the translation directory and added the yellow line.

0_1537432767972_b1c9a796-6d8c-49b7-a1da-c571b2f895e7-image.png

Hope it can be of help to others. :smiling_face_with_smiling_eyes:

Crayyy

I still am unable to add or modify the memos in any way :) I don’t understand how to use the HTTP command to pass commands to the module, Here is what I typed at the SSH command prompt. “http://192.168.1.175:8080/AddMemo?memoTitle=SHOPPING&item=Fruits&level=INFO” but I get the following errors and no memo on my mirror :( “-bash: http://192.168.1.175:8080/AddMemo?memoTitle=: No such file or directory
[7]- Exit 127 http://192.168.1.175:8080/AddMemo?memoTitle=SHOPPING
[8]+ Done item=Fruits” please help :)

lovesicker

@schnibel

Thank you for providing us this fantastic module! It’s so useful.

I have a suggestion: could you merge multiple instances of MMM-Memo into only one instance? Like the following:
{
module: ‘MMM-Memo’,
config{
{
memo1
memoTitle: XXXX
position:
},
{
memo2
memoTitle:YYYY
position:
},
…
}

Because there are six instances of MMM-Memo at least, the system performance will be affected and there are always many notifications about this module in console log when any notifications send by any modules.

Robinson128

Thank you for this module that I like a lot despite the harm I had to use it without Jarvis. :) beginner in computer science and big noob for HTML CSS and many other things. I search a little but I did not find how to make notes appear after each other in the same memo. The oldest note in 1 and the most recent in 2,3 or 4 and so on. Thanks for your help.
(Google traduction)

WasupDude

Such a usefull topic,thanks

WasupDude

This post is deleted!

FruityBebbles

@Crayyy same issue… did you find a fix?

sdetweil

ok… I installed this module…

u define in the config.js a tag to identify acceptable incoming ‘memos’…
memoTitle

once I did that I was able, in a browser to do

http://192.168.2.26:8086/addMemo?memoTitle=testing&item=foobar
and I got back
{“status”:“success”,“item”:{“memoTitle”:“testing”,“level”:“INFO”,“item”:“foobar”,“timestamp”:“2019-09-16T00:12:05.199Z”}}
and a memo appears on the mirror screen

192.168.2.26 is my mirror ip address, and 8086 is the port in the config.js

in config.,js I have

  address: "", // Address to listen on, can be:   
                        // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
                        // - another specific IPv4/6 to listen on a specific interface
                        // - "", "0.0.0.0", "::" to listen on any interface
                        // Default, when address config is left out, is "localhost"
  port: 8086,
  ipWhitelist: [],   // allow anyone to connect

if address:“localhost” then only from INSIDE the mirror machine is allowed to make connections to mirror application

if I do this

http://192.168.2.26:8086/addMemo

the response is

{"status":"failed","error":"No 'memoTitle' given."}

if I do this

http://192.168.2.26:8086/addMemo?memoTitle=testing

where memoTitle matches the value specified in config.js

    {
        module: 'MMM-Memo',
        position: 'top_left',
        classes: 'default everyone',        // if using MMM-ProfileSwitcher module
        config: {
            // See 'Configuration options' for more information.
            memoTitle: "testing"
        }

then i get this

{"status":"failed","error":"No 'item' given."}

so, http://192.168.2.26:8086/addMemo?memoTitle=testing&item=

note to have multiple memo pages, you need to add the module to the config.js multiple times, with different memoTitle values…

readme
If you declare several modules in the config/config.js file, you will get several memo notes on your MagicMirror2 profile.