Read the statement by Michael Teeuw here.
Failed at the magicmirror@2.2.2 start script 'sh-run-start.sh'
-
Because i am very interested why there are so much problems i will install a complete new Raspbian and MagicMirror. Let me try, i will report soon
-
Please let me know. If you make It work could you share It as an ISO ti flash? Would be so good
-
I too am keeping abreast of this. I have had 5 installs that went so well that after the update, I can not get it installed.
Are we the only ones having problems.
Do the install directions need to be changed. Luckily I have backed up every sd card so I am safe, but need to figure out if I do anything to them now (besides the MM upgrade) will they crash. -
I think i figured out what went wrong ;)
i set up a new raspbian (Desktop Version) and could install the MagicMirro without any issues.
IMPORTANT:
while the installation of MagicMirror (automatic installer) u will see this:
Cloning MagicMirror Done! Installing dependencies ... npm WARN deprecated coffee-script@1.10.0: CoffeeScript on NPM has moved to "coffeescript" (no hyphen) npm WARN prefer global coffee-script@1.10.0 should be installed with -g npm WARN prefer global jsonlint@1.6.2 should be installed with -g > uws@0.14.5 install /home/pi/MagicMirror/node_modules/uws > node-gyp rebuild > build_log.txt 2>&1 || exit 0
When u arrived this, it seems the installation is done. But wrong! just wait. it will take some time even if there is no cursor blinking.
Just wait and you will see some more installation steps:
Wait again:
wait again ^^ and u will be asked if u want to use pm2. say YES! :
Finally u will see this:
And after a few seconds the magic mirror will start automatically and u can enjoy :D
Edit:
so just to get sure, here are the quick steps i did:-
loaded the newest raspbian stretch with desktop from here
-
copy to SD card with ApplePi-Baker
-
put an empty file named “ssh” on the boot directory to enable ssh
-
start the pi
-
via ssh
sudo raspi-config
set up some configurations like Network-Name, Screen resolution, enabled VNC, expand filesystem etc. -
reboot
-
sudo apt-get update ; sudo apt-get upgrade
this will take a while -
sudo rpi-update
this will take a while, too -
reboot
-
bash -c "$(curl -sL https://raw.githubusercontent.com/MichMich/MagicMirror/master/installers/raspberry.sh)"
Then just wait! ;)
-
-
@cruunnerr said in Failed at the magicmirror@2.2.2 start script ‘sh-run-start.sh’:
VNC
No NPM install or other necessary pi setup as listed on the site at Configuring the Raspberry Pi?
-
@carltonb said in Failed at the magicmirror@2.2.2 start script ‘sh-run-start.sh’:
Configuring the Raspberry Pi
Oh sorry, i enabled display rotate in the config. And to disable the screensaver i used
sudo apt get install xscreensaver
, then via VNC on the Desktop move to the upper left corner (the raspberry button) and go to Preference -> Screensaver and disable it.
Maybe usesudo apt-get install unclutter
to hide mouse.I just set it up to proof, if there are any issues ^^ So this was a quick install “guide”
But yes, there is no extra npm install or something like that necessary.
VNC can be enabled with raspi-configedit:
oh, and keep in mind that u have to set pm2 to automatically start at reboot.maybe after the first restart after installation finished there is no automatically startet MagicMirror.
https://github.com/MichMich/MagicMirror/wiki/Auto-Starting-MagicMirror
-
@cruunnerr lucky you… this is what i got
pi@raspberrypi:~ $ bash -c "$(curl -sL https://raw.githubusercontent.com/MichMich/MagicMirror/master/installers/raspberry.sh)" $$\ $$\ $$\ $$\ $$\ $$\ $$$$$$\ $$$\ $$$ | \__| $$$\ $$$ |\__| $$ __$$\ $$$$\ $$$$ | $$$$$$\ $$$$$$\ $$\ $$$$$$$\ $$$$\ $$$$ |$$\ $$$$$$\ $$$$$$\ $$$$$$\ $$$$$$\ \__/ $$ | $$\$$\$$ $$ | \____$$\ $$ __$$\ $$ |$$ _____|$$\$$\$$ $$ |$$ |$$ __$$\ $$ __$$\ $$ __$$\ $$ __$$\ $$$$$$ | $$ \$$$ $$ | $$$$$$$ |$$ / $$ |$$ |$$ / $$ \$$$ $$ |$$ |$$ | \__|$$ | \__|$$ / $$ |$$ | \__|$$ ____/ $$ |\$ /$$ |$$ __$$ |$$ | $$ |$$ |$$ | $$ |\$ /$$ |$$ |$$ | $$ | $$ | $$ |$$ | $$ | $$ | \_/ $$ |\$$$$$$$ |\$$$$$$$ |$$ |\$$$$$$$\ $$ | \_/ $$ |$$ |$$ | $$ | \$$$$$$ |$$ | $$$$$$$$\ \__| \__| \_______| \____$$ |\__| \_______|\__| \__|\__|\__| \__| \______/ \__| \________| $$\ $$ | \$$$$$$ | \______/ Updating packages ... Trovato:1 https://deb.nodesource.com/node_9.x stretch InRelease Scaricamento di:2 http://archive.raspberrypi.org/debian stretch InRelease [25,3 kB] Trovato:3 http://mirrordirector.raspbian.org/raspbian stretch InRelease Recuperati 25,3 kB in 11s (2.260 B/s) Lettura elenco dei pacchetti... Fatto Installing helper tools ... Lettura elenco dei pacchetti... Fatto Generazione albero delle dipendenze Lettura informazioni sullo stato... Fatto build-essential is already the newest version (12.3). curl is already the newest version (7.52.1-5+deb9u3). git is already the newest version (1:2.11.0-3+deb9u2). unzip is already the newest version (6.0-21). wget is already the newest version (1.18-5+deb9u1). 0 aggiornati, 0 installati, 0 da rimuovere e 0 non aggiornati. Check current Node installation ... Node currently installed. Checking version number. Minimum Node version: v5.1.0 Installed Node version: v9.3.0 No Node.js upgrade necessary. Cloning MagicMirror ... Cloning into 'MagicMirror'... remote: Counting objects: 9010, done. remote: Total 9010 (delta 0), reused 0 (delta 0), pack-reused 9010 Ricezione degli oggetti: 100% (9010/9010), 11.45 MiB | 19.00 KiB/s, done. Risoluzione dei delta: 100% (5098/5098), done. Cloning MagicMirror Done! Installing dependencies ... > uws@0.14.5 install /home/pi/MagicMirror/node_modules/uws > node-gyp rebuild > build_log.txt 2>&1 || exit 0 > electron-chromedriver@1.7.1 install /home/pi/MagicMirror/node_modules/spectron/node_modules/electron-chromedriver > node ./download-chromedriver.js > electron@1.4.15 postinstall /home/pi/MagicMirror/node_modules/electron > node install.js /home/pi/MagicMirror/node_modules/electron/install.js:46 throw err ^ Error: read ECONNRESET at _errnoException (util.js:999:13) at TLSWrap.onread (net.js:629:25) npm ERR! code ELIFECYCLE npm ERR! errno 1 npm ERR! electron@1.4.15 postinstall: `node install.js` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the electron@1.4.15 postinstall script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/pi/.npm/_logs/2018-01-05T20_56_42_584Z-debug.log Unable to install dependencies!
-
did you set it up freshly?
i can’t imagine that you haven’t crashed something before. Please try a new installation of raspbian -
@cruunnerr Tried your method on step 10 it took almost 90 minutes to finish!!!
I then went to the page on Auto Starting. Followed the directions. Rebooted.
MagicMirror screen flashed for about 3 seconds, then it went to the desktop for another 3 to 4 seconds then it stopped at the command line.
If I run the logs it tells me[TAILING] Tailing last 15 lines for [mm] process (change the value with --lines option) /home/carltonb/.pm2/logs/mm-out-1.log last 15 lines: 1|mm | > magicmirror@2.2.2 start /home/carltonb/MagicMirror 1|mm | > sh run-start.sh 1|mm | 1|mm | 1|mm | > magicmirror@2.2.2 start /home/carltonb/MagicMirror 1|mm | > sh run-start.sh 1|mm | 1|mm | 1|mm | > magicmirror@2.2.2 start /home/carltonb/MagicMirror 1|mm | > sh run-start.sh 1|mm | 1|mm | 1|mm | > magicmirror@2.2.2 start /home/carltonb/MagicMirror 1|mm | > sh run-start.sh 1|mm | /home/carltonb/.pm2/logs/mm-out-0.log last 15 lines: 0|mm | > magicmirror@2.2.2 start /home/carltonb/MagicMirror 0|mm | > sh run-start.sh 0|mm | 0|mm | 0|mm | > magicmirror@2.2.2 start /home/carltonb/MagicMirror 0|mm | > sh run-start.sh 0|mm | 0|mm | 0|mm | > magicmirror@2.2.2 start /home/carltonb/MagicMirror 0|mm | > sh run-start.sh 0|mm | 0|mm | 0|mm | > magicmirror@2.2.2 start /home/carltonb/MagicMirror 0|mm | > sh run-start.sh 0|mm | /home/carltonb/.pm2/logs/mm-error-0.log last 15 lines: 0|mm | npm ERR! npm v3.10.10 0|mm | npm ERR! path /home/carltonb/package.json 0|mm | npm ERR! code ENOENT 0|mm | npm ERR! errno -2 0|mm | npm ERR! syscall open 0|mm | 0|mm | npm ERR! enoent ENOENT: no such file or directory, open '/home/carltonb/package.json' 0|mm | npm ERR! enoent ENOENT: no such file or directory, open '/home/carltonb/package.json' 0|mm | npm ERR! enoent This is most likely not a problem with npm itself 0|mm | npm ERR! enoent and is related to npm not being able to find a file. 0|mm | npm ERR! enoent 0|mm | 0|mm | npm ERR! Please include the following file with any support request: 0|mm | npm ERR! /home/carltonb/npm-debug.log 0|mm | /home/carltonb/mm.sh: line 1: cd: home/carltonb/MagicMirror: No such file or directory /home/carltonb/.pm2/logs/mm-error-1.log last 15 lines: 1|mm | npm ERR! npm v3.10.10 1|mm | npm ERR! path /home/carltonb/package.json 1|mm | npm ERR! code ENOENT 1|mm | npm ERR! errno -2 1|mm | npm ERR! syscall open 1|mm | 1|mm | npm ERR! enoent ENOENT: no such file or directory, open '/home/carltonb/package.json' 1|mm | npm ERR! enoent ENOENT: no such file or directory, open '/home/carltonb/package.json' 1|mm | npm ERR! enoent This is most likely not a problem with npm itself 1|mm | npm ERR! enoent and is related to npm not being able to find a file. 1|mm | npm ERR! enoent 1|mm | 1|mm | npm ERR! Please include the following file with any support request: 1|mm | npm ERR! /home/carltonb/npm-debug.log 1|mm | /home/carltonb/mm.sh: line 1: cd: home/carltonb/MagicMirror: No such file or directory 0|mm | npm 0|mm | 0|mm | ERR! Linux 4.9.59-v7+ 0|mm | npm 0|mm | ERR! argv "/usr/bin/node" "/usr/bin/npm" "start" 0|mm | npm ERR! node v6.12.3 0|mm | npm ERR! 0|mm | npm v3.10.10 0|mm | npm ERR! path /home/carltonb/package.json 0|mm | npm ERR! code ENOENT 0|mm | npm ERR! errno -2 0|mm | npm ERR! syscall open 0|mm | npm 0|mm | ERR! enoent ENOENT: no such file or directory, open '/home/carltonb/package.json' 0|mm | npm ERR! 0|mm | enoent ENOENT: no such file or directory, open '/home/carltonb/package.json' 0|mm | npm ERR! enoent This is most likely not a problem with npm itself 0|mm | npm ERR! enoent and is related to npm not being able to find a file. 0|mm | npm 0|mm | ERR! enoent 0|mm | npm ERR! Please include the following file with any support request: 0|mm | npm ERR! /home/carltonb/npm-debug.log 0|mm | /home/carltonb/mm.sh: line 1: cd: home/carltonb/MagicMirror: No such file or directory 1|mm | npm
What step did I miss. It seems not to find the sh run-start.sh file. I am now so confused.
I will see how this sorts out over the weekend and will wait until Monday to try again. -
When u say yes for using pm2 while installation, it will make a MagicMirror process by itself.
type
pm2 status
If there is a task called “MagicMirror”, then try:
cd
pm2 stop MagicMirror
pm2 start mm.sh
pm2 save
edit: however i need to say, that 90 minutes is really really much!
The whole installation of the raspbian OS including the MagicMirror took me about one hourand your mm.sh should look exactly like this:
cd MagicMirror //here must be a wordwrap. so don't use one line DISPLAY=:0 npm start
to create this file type in console:
cd
nano mm.sh
adding the lines above and save with “ctrl+x” and “y”
chmod +x mm.sh